[UNBOXING] KWA QRF MOD 1 SMG MP5 MPX Vairent Unboxing

[@windycityairsofter1449]

You’re absolutely correct we love our 11.1 I personally love my 11.1 titan power batteries to be specific it is also gate titan ready which I’m having done as I type this

[@PheasAirsoft]

Thank you for letting me know. I keep making reference to it, but wasn't sure if it was just the couple of Americans I actually know or if it was most.. really appreciate the feedback!

[@brodymcgreevy8936]

11.1v are really the standard in the US. But you should run a mosfet so you don’t destroy your electronics. Great channel keep up the good work.

[@SaraphDarklaw]

I was going to get this to get back into airsoft but I guess I’ll stick to my old ics mp5. Thank you for the information.

[@DEADhands.]

I just ordered one of theses along with a g&g green bucking (based off a comment on your tear down vid). I’ve been watching this gun since shot show 19 and am beyond excited for it to arrive.

[@Beefy-Tech]

This is by far my favorite SMG at the moment! next christmas imma treat myself to it xD.

[@PheasAirsoft]

Excellent choice young man, excellent choice!

[@ehsh-ts8kn]

@@PheasAirsoft what the battry name of urs

[@marcushillerstrom25]

Great review! In Sweden we also love our 11.1s, people get lynched if they show up with a NiMh...

[@PheasAirsoft]

hi, thanks for the info. 11.1 seems to be gaining a bit of traction in the UK, but 7.4v is still king. Although we still have quite a few people in the UK still clinging on to NiMh type batteries!

[@michaelmccr3294]

Aegs are made differently for certain countries so for us uk kwa will love a 7.4v lipo

[@aidand.1713]

It's more MPX than MP5

[@PheasAirsoft]

Hiya thanks for the comment. It certainly is more mpx than mp5 but got to thinking about new players and their knowledge and thought they would associate it with the mp5 more than knowing the X instead. Pheas

[@cinspain08]

How in this price range does it not have a mosfet i really don't know , really would like this but running 11.1 would ruin it without the mosfet in

[@Mr.Burton17]

Love this channel and review on this platform I have a question my friend. what is the difference between the T6 and the mod1 I know the mag well takes rounds so are they the same.

[@PheasAirsoft]

Hiya, glad you're enjoying my stuff! The only different is the mag types. The mod 1 takes SMG type mags while the T6 is M4 based. But internally they are the same gun. It's fairly clever from a business point of view for KWA they have a solid platform that can be easily altered slightly to make a lot of different varients of all sorts of different things. Pheas

[@dixienormous7]

Very correct on us Americans using the 11.1 Lipo to achieve maximum destruction (or call it rate of fire) 😂

[@douglasroehling]

I would love to make this into a mp5

[@sniperdaniel4207]

what kind of 1500 round mag would fit this gun>? I have same and 80 rounds is not cutting it

[@scalefreakgaming]

Have you had any experience actually playing with this? I have one, and I'm having issues with feeding BB's.

[@PheasAirsoft]

Hiya. I don't have this exact one, but I do have 2 x TK45 (the recoil and non-recoil) and I have a ronin recon and work on them all the time (as they are all pretty much identical internally). What hop rubber and barrel are you running? and what weight bb do you use? Pheas

[@stephencalt6474]

Hey man, awesome video and gun, I’m looking at getting one of these! Was the place you got it from called Jtac in Cannock? Did they have it in stock or did you order it?

[@PheasAirsoft]

Hiya, thanks for the question and the compliment on the video!. I got it from JTAC customs based in South Yorkshire. I think he still might have one or two in stock. He has a Facebook page, he is having a few issues with his website at the moment. Hope that helps. Pheas

[@stephencalt6474]

Pheas Airsoft thanks for getting back to me. That’s awesome I’ll check out they’re Facebook as I was having a bit of trouble on the website haha. Many thanks Stephen

[@PheasAirsoft]

@@stephencalt6474 you are more than welcome. Tell him Pheas sent you!

[@simakmario]

Would you purchase T6 or Mod 1? I cannot decide which one to go with. Since internals are the same, would you decide based on the magazine type? Does Umbrella Prometheus 6.03 EG inner barrel with R-hop fit? Anyways, amazing content on the KWA products. I find your channel very helpful. Keep it up. Subscribed.

[@PheasAirsoft]

Thank you for the compliment, it's made my evening. The T6 or the mod 1... I think I would go for the T6 as as cool as the mod1 is I like the feel of the AR style mags and feel like I'm carrying something a little more substantial. That said, if you threw the TK45 into the mix then that would be my winner as the large vector style mag well works for me and it looks a beast. I am not sure on the barrel and others would need to tell you on that. I know that the madbull barrel doesn't fit into a tk45 (it's very picky about what barrels it takes) in all honesty you won't miss out regardles of which you choose. They are both awesome pieces of kit and work a treat. Pheas

[@dixienormous7]

It depends which hop chamber you are using, I dont think the maxx models will fit and I know forsure my flat hopped promy with a prowin HopUp chamber won’t fit.

[@maverickcastellucci2506]

Hi, could you link the battery in the video? Or something similar. Building a cart for the gun on evike. Thanks in advance

[@PheasAirsoft]

Hiya. This is the bigger of the 11.1v I just use www.patrolbase.co.uk/nuprol-11-1v-2600mah-20c-lipo-crane-battery-deans Here is fhe closest to the smaller one I can find : www.patrolbase.co.uk/vp-racing-11-1v-2600mah-20c-lipo-crane-stock-battery As for the 7.4v usually use it's this one: www.patrolbase.co.uk/nuprol-7-4v-2200mah-lipo-nunchuck-battery-deans Hope that helps. Pheas

[@maverickcastellucci2506]

@@PheasAirsoft and the larger 11.1 will fit with the extension?

[@PheasAirsoft]

@@maverickcastellucci2506 yes it will. Makes like so much easier having the extension and I have the stock out slightly longer than the extension is so never even notice it's there. Pheas

[@krowdkillaoscar3259]

About as close to an mpx as we’re ever gonna get

[@JONZORVOX]

On mine the stock in the shortest setting doesn’t lock in and stay there. Does yours? I can just pull it out to the second setting without touching the button to release it. Please help

[@draagar8623]

As a 2.5 dose it still have the cut off feature on empty? Great video, I've finally found a channel that has lots of info on KWA rifles. 😁

[@crewgadjy]

No unfortunately they threw that out along with recoil, such a shame they didn't take the time to design this properly. I mean for christs sake why make unique mags when they could have mad it MP5 Mag compatible. As for his your comment about it being an MP5 Varient, it isn't, it has nothing at all to do with the MP5 or HK. Its a propriety design meant to resemble nothing just a generic PCC.

[@draagar8623]

@@crewgadjy well that's just stupid lol. Shame, looks like I'll be sticking with my Rm4.

[@crewgadjy]

DRAAGAR custom recoil ones are possible but the cutoff feature was dumped to make way for mosfett, idiots.

[@yeaahhbuuddy9827]

What tracer unit will fit this? I tried a Acetech AT1000 but diameter was too big.

[@jago1206]

Hey i just got the mod 2 and im so confused how to take off the orange tip to put on my suppressor. I already unscrewed it. Is there glue attached to orange tip?

[@PheasAirsoft]

Hello, once the muzzle break is off it should leave you with a 14mm negative thread, which your suppressor should just screw back on to (dont forget its negative thread so its lefty tighty righty loosy) Pheas

[@garypasaway3367]

Thanks for this very informative review about mod1. I have question, is the gear ratio and the motor used in this qrf model is the same gear and motor that used in Ronnin t6? Thanks and more power.

[@PheasAirsoft]

Hiya. They are the same across their current gen of stuff starting form the tk45 onwards. Hope that helps. Pheas

[@garypasaway3367]

@@PheasAirsoft thanks for the quick reply. After this pandemic issue im planning to buy qrf mod1 or t6, but till now im confused either of this two were to choose to buy...... .

[@PheasAirsoft]

@@garypasaway3367 if it was me.... I'd go for the T6 just because I'm used to the TK45 so the exposed mags I'm not mega keen on. Where as I like the AR type platform . Pheas

[@bensykes5830]

don't suppose you know what the standard sping is in the mod 1? I've upgraded my barrel, rubber n flat hopped and its slinging .28s out at 322fps on the lowest adjustment setting 😂 need a down grade spring but not sure what spring to get as I don't know what's in the gun already

[@PheasAirsoft]

Hiya, I believe that the standard one is approximatley m120 ( I think), as its non recoil you can use the non-linar AEG springs to adjust your fps up and down and then use the FPS adjuster to fine tune when you are in the ball park of what you want. Hope that helps! Pheas

[@eagerbordercollie3200]

Could you please give me a link to the battery I should get for it, Thank you.

[@jackdavis5012]

You sound so much like the guy who does the patrol base livestreams

[@PheasAirsoft]

Hiya. We are both from the same area of Yorkshire. So similar accents. I do know the guy too! Lovely guy! Pheas

[@codwaw99]

would you be able to link the hop up rubber and what not id need for this if I was to change it

[@PheasAirsoft]

Hiya! I recommend (had the best results out of) The prometheus purple (soft) air seal rubber: www.thecageairsoft.co.uk/prometheus-air-seal-chamber-packing/ as for the titan, if you wanted one, here is the one you need: www.thecageairsoft.co.uk/gate-titan-v2-drop-in-mosfet/ You can get the basic or the advanced set, just make sure it is the rear wired model. And if you want the larger battery space you need this airtech battery extension: www.bullseyecountrysport.co.uk/airtech-airsoft-kwa-ronin-tk45-pdw-tanker-battery-extension-unit-30416-p.asp Hope that helps! Pheas

[@codwaw99]

@@PheasAirsoft it did indeed. Thanks

[@TDHaze420]

Thank you

[@emillaurente7613]

does this take regular mp5 mags>

[@PheasAirsoft]

Hiya. Unfortunately it doesn't take regular MP5 mags. Pheas

[@emillaurente7613]

@@PheasAirsoft i am planning to get this unit, but im worried with the 80bb mag, im not sure if hi cap mp5 mags would work :(

[@schonka2]

Hey Pheas, my QRF's bolt catch is kinda wobbly and feels loose (the bolt catch spring is also very weak), is this normal or could this be an issue with my particular model? It functions normally though.

[@PheasAirsoft]

Hiya. They are wobbly normally and loose. As long as it's doing its job then it's all good. When you use it to lock the ejection port open to it feel more solid? Pheas

[@schonka2]

@@PheasAirsoft Yes, when it holds the port open it sits tight and feels satisfying when I "release" the bolt. Glad to hear its not an issue with my gun.

[@SionMega]

What parts would this need to make it into a recoil mate?

[@PheasAirsoft]

Hiya, you would need the buffer tube with end cap, recoil weight (and end spring), a linear spring from the recoil one and the sling plate that helps to secure it down and then a stock of your choice to house the battery, but you would loose the VPS system form this model. If you are in the UK, then John at JTAC Customs on facebook has the parts in stock (I think), if you are in the US then Daneel at tacticalparts.com/ will sort you out! Hope that helps! Pheas

[@SionMega]

@@PheasAirsoft cheers mate I’m in the Uk so will have a nosey at jtac, and I’m not too fussed about the VPS system if I’m honest recoil probably be more appealing cheers for the reply

[@ehsh-ts8kn]

Does anyone know the exact battry and charger name

[@cesar29er]

Does it have electronic triger ? I whant this gun but whit the ascu electronic triger. Will it fit ? Will i need a hight tork motor, or the one that comes in is allright ?

[@PheasAirsoft]

Hi, thanks for the question. The standard motor is high torque and is pretty decent to be honest. If you want faster rate of fire then consider upgrading it eventually but from the outset it is good! The trigger block is a standard trigger block, more or less so should be compatible with anything that is designed to go into a version 2 gearbox. The only one I have specifically worked on is the titan though, but in theory the others should work. It is a video I'm planning for the future is to get a few different brands of mosfet and see what does and doesn't fit. (But money doesn't allow just yet ha ha. Hope that helps. Pheas

[@cesar29er]

@@PheasAirsoft thanks, my intention is to go for the ascu electronic trigger Thanks for the reply :)

[@notsoprogamer3627]

r/ihadastroke

[@livezplay1902]

Will a acetech lighter by tracer unit fit into this gun?

[@PheasAirsoft]

Hiya, yes it will. You might need to put a tiny (1inch) barrel extension on to make sure the inner barrel doesn't go too far into the tracer to cover the light gate, but it should fit perfectly without (I think) Pheas

[@kevinzhou7442]

What battery connector is it, small Tamiya or large Tamiya

[@PheasAirsoft]

Hiya, thanks for the question. It is a small tamiya type connector. Pheas

[@eagerbordercollie3200]

Is a small tamiya the same as a mini tamiya

[@WizardRhyme]

Americans do love their 11.1

[@PheasAirsoft]

To be fair the more guns I test fire on 11.1v the more I get it and can understand why! Pheas

[@DesertGhostsAirsoft]

We love our 11.1s lol

[@alsals987]

Can i attach AR Stock tube onto this gun??

[@PheasAirsoft]

Hiya. Yes you can. Here is a video I did on a slightly different gun but works exactly the same. kzbin.info/www/bejne/gKe0pKiVbr9miLs Hope that helps. Pheas

[@alsals987]

@@PheasAirsoft Great!! thank you :)

[@stralegaming2597]

Can u unbix somz kindbof c96 mauser

[@PheasAirsoft]

Hi, thanks for the suggestion. I've just done an order that had been delivered today. Next time I order I will try and sort one out to unbox. I'll make a note if it isn't the mean time.

[@dam3z698]

wait why dont people use 11.1s over there. Everyone runs a 11.1 over here lol

[@PheasAirsoft]

Hi, thanks for the question. More and more people are certainly coming round to them, but we just generally seem to prefer our 7.4v lipos, I am the same. To be fair with aegs like this, once you put the titan in it, there is no need for the 11.1v and if you upgrade the motor too, it would perform as well as an 11.1v without a titan (or very very close to it)

[@caiohenriqueesteves6873]

Val

[@roguetrooper9442]

No 9mm shell ejection it’s a no from me