Unboxing & Setting up IID Tool from GAP Diagnostics IID on IPhone

In this video we get our new IID Tool from GAP Diagnostics and set it up ready to use. This includes getting the app and installing it on an Iphone.

[@amabeza]

Its brilliant that each time I look up an issue on Discovery powerfulukltd has a video on it.

[@grantfreeman9789]

Great video guys (again!). Can I ask do you have a video to adjust the door handle opening of 2010 Range Rover Sport? My drivers door handle seems to require a large amount of force to open the door... Thanks again. Gold Coast, Australia

[@samseymour7908]

Thanks guys....Phew might not have done it without you.......ready now for using the tool video.

[@ulrichcaesar3225]

Hi, would you think about making a video about upgrade your Discovery 4 not only to xenon headlights but also next step xenon with adaptive lights (AFS) , manual upgrade plus ccf file update with that GAP diagnostics BT ??Regards

[@Arks123]

Cracking video lads 👍

[@deanostevenson9238]

great channel ., Deano from New Zealand

[@L663]

Thanks 👍

[@arturka4169]

That's crazy for this amount of money.If you get a workshop probably ok to buy, but not for ordinary range rover owners

[@philhind3766]

Hi can I ask if you have done a video on adding a second vin to your iid tool as I want to do this to mine but very unsure how to go about this thanks phil

[@davidf.8497]

One question : They are selling one which is labeled G3, is it the same or a lesser version ? Thanks

[@jean-francoissavoy9213]

Thanks, great video.. i'll purchase this tool

[@michelbonnet3787]

The place of the ODB plug is unappropriated, the IIDTool is there very exposed to shocks. An flat ribbon extension cable must be added (for about 10 GBP on amazon) to make ODB totally usable, placing it on the left side of driver's legs.

[@petedriscoll23]

Super helpful video!! Did you ever make the video on how to use it?

[@L663]

We have some videos where we have used the IID tool to read faults etc.

[@petedriscoll23]

@@L663 thank you so much!! I really appreciate all of your help in your videos!!

[@emanuelperez1861]

Have you been able to change the CCF for the xenons on the early D4 with this tool? What other accesories would you be able to add with it? ....considering getting one 😁

[@kamaljitsingh118]

Thanks sir very good information

[@fredhepden7334]

Excellent thank you

[@irootsk]

Hi guys. Is it possible to perform blender motor/actuator calibration with it? I've replaced the left side blender motor LR041273 as there was just cold air coming from left vents. Unfortunately it's the same after replacement :) On LR3 you can do the self test via ECON and some other button.....but for LR4 there is no such a self test - at least i am not aware of any.

[@donwk1892]

I have a 2006 rrs supercharged... My car was fine and out of boredom i selected calibrate anti roll option then i got e7 error code and my red suspension light is on... Everything still works ie suspension goes up an down etc but now the red light stays on and fault code C1A00-54 - Control module - System programming failure - missing calibration (AB)... 😮... Any advice please 🙏

[@L663]

Contact gap support- they are excellent 👍🏻

[@donwk1892]

@@L663 cheers... Done exactly that.. See wot they come back with.. Ps... Have you any idea wot that anti roll calibration is about do you?

[@pires53]

It seems that tool is not suitabble for the earlier L322 (2002)

[@thehiddenreality2314]

Excelente.good job

[@L663]

Thank you! Cheers!

[@Disco5tony]

Is thia the G3 model

[@L663]

Yes i think this was the G3

[@JayKay-ht8rg]

Fantastic. Looking at getting one. But can it do DPF Regenerations Please??

[@L663]

Hi I raised this issue with the guys at GAP and here is their reply...."Regeneration is not implemented yet. Keep in mind that the conditions have to be present (highway speed), there's no way around these, even with a force regen. "

[@JayKay-ht8rg]

powerfulukltd Okay. Thanks. But you'd of thought you could do a DPF Regen while driving it. (Motorway speeds for half hour or so) So basically your just triggering the cars own regen cycle to activate..??

[@HaggisMuncher-69-420]

@@JayKay-ht8rg I would like this. My Freelander was smoking today from the engine bay as I sat in the drive at 3k rpm trying to encourage a regen. Realised LR want you driving it to force it to regen but can't really go on the motorway doing max 40mph

[@lionlions5921]

Hello there I do have Range Rover 3.6 HSE MODEL 2007 the told my my engine in black it's not stated at all don't know what to do do you know some who can sales complete engine please with warranty thank you very much

[@wayneclarke4083]

Have you tried to unlock and purge your FBH .?

[@dzebugodfred5276]

yh

[@karimalameddine5092]

Can you do an ecu remap to change MPG from the obd plug?

[@michelbonnet3787]

Remaps are only sold by BAS.

[@karimalameddine5092]

@@michelbonnet3787 BAS is? I have no idea! Thanks 🙂

[@michelbonnet3787]

@@karimalameddine5092 Bell Auto Services (bellautoservices.co.uk/)

[@KiNGZ97_]

Can you make a video on how to replace the suspension air compressor on a 2007 Range Rover sport hse plz?

[@L663]

should be the same as this one kzbin.info/www/bejne/aV7OoGVmgcalqNE

[@KiNGZ97_]

powerfulukltd ok thank you

[@marcus0018]

I nearly got one but its locked to a vin number £400 for the tool and £60 to add another vin

[@L663]

Hi - they do not explain this part of the tool very well. If you buy the tool can use it on any Land Rover that it connects to.... for reading faults / seeling live vlaues / clearing faults / resetting crash data / etc etc The ONLY thing you cannot do with the tool on another car is change CCF values ( the cars build configuration ) so you cannot for example change to Xenon headlights from Halogen. It still represents really good value for money !

[@madboybob]

@@L663 is the ICarsoft tool able to update CCF files for a halogen xenon upgrade disco 4?

[@chrisharvey6845]

Hi, do I need to pay any more money to GAP to be able to change the height settings for going onto the ferry with my Discovery 3 2006 . Regards Chris

[@L663]

No as long as the tool is "assigned" to your Discovery then you can do this for free ! as often as you like !

[@chrisharvey6845]

@@L663 Thank you for your help.

[@patrickfarrugia9431]

Can it program a new replacement instrument cluster on Defender Puma 2007? Thanks!

[@L663]

Hi - I checked with the helpful guys at GAP Diagnostics and they confirm the tool can program a new cluster on the Puma.... but only brand new clusters... not used ones

[@patrickfarrugia9431]

@@L663 Thank you.

[@maxv5888]

Hello I was wondering where can I get a stearin wheel like yours thanks

[@L663]

www.powerfuluk.com/catalogsearch/result?q=rsw2010

[@FabianCharrua]

Can you program a key with it?

[@phattdaddy2974]

You can, there is a video for that.

[@HaggisMuncher-69-420]

For the price, it looks like cheapy Chinese plastic