10 points for internal weight. Functionality wins in that case vs. having it exterior where you are never going to see it in any practical sense, anyway.
@tylernx3 жыл бұрын
I mean it would have looked good. Like a white case with a brass contrast. It wouldn't have hurt to be on the outside. But I also understand your point of view
@93ksj3 жыл бұрын
My first thought when seeing that gray was GMK Dualshot
@JesusDanielle3 жыл бұрын
Same here
@pokosure48313 жыл бұрын
I thought gmk pono! Mainly cuz it’s the only gmk set I bought… but still
@shunster3 жыл бұрын
kinda wish they would have exposed the brass weight rather than hide it internally. although it does make it look cleaner and more minimal this way, so some people might prefer that.
@MechMerlin3 жыл бұрын
I prefer that too!
@alexp35773 жыл бұрын
Yeah, I kind of hate how brass weights look, so I am glad that I can just not buy it.
@dsniper37763 жыл бұрын
it doubles as battery slot since 67 lite has bluetooth version
@KappaSigmaMB093 жыл бұрын
love your vids man and all the help you given me in the Taeha disc.
@timehathtcg3 жыл бұрын
i know it looks really simple, but the clean seamless look with a weight to give it some heft is still pretty nice :) v3 gonna pick one up
@_fatalruin3 жыл бұрын
I couldn't imagine the Xeno being any stiffer than another top mount board. Of course, those who got a half plate may have had an even better experience.
@Green-Man3 жыл бұрын
When did your green kanagawa deskmat arrive? I ordered one of those but haven't received any updates other than it shipping in july
@krisjunior26983 жыл бұрын
Would this be better than the alexa/phantom or should i just get this?
@arpeykeys3 жыл бұрын
How would you compare the sound to a tofu65 with a poly plate? Or maybe just in general. I have the kbd67 lite, and tofu65, but not sure if the sound of v3 sounds that different to a modded tofu65 to really justify buying it.
@ee1yd3 жыл бұрын
not really, you can make a lot of keyboards sound similar with modding, if you care about sound that is
@Aunee113 жыл бұрын
I wish the brass weight could be seen from outside. :(
@DuyNguyen-lc1vk3 жыл бұрын
Can you compare kbd67 v3 with D65?
@dubOZ3 жыл бұрын
I wonder if leaving the weight out or replacing it with foam or silicone would change the case sound
@MechMerlin3 жыл бұрын
It will change it, but it's not too noticeable IMO
@TheRealRaijinX3 жыл бұрын
Which is has more deep thocc in your opinion? Aluminum vs injected molded plastic?
@MechMerlin3 жыл бұрын
Typically the denser the material the less thocc. Plastic is less dense than Aluminum.
@TheRealRaijinX3 жыл бұрын
@@MechMerlin Thanks!
@TheSmoresCat2 жыл бұрын
Is there something special you need to do to get RGB_MATRIX_KEYPRESSES to work on this board?
@MechMerlin2 жыл бұрын
Yeah it's not enabled by default in the firmware. So you will need to enable it and recompile.
@Yewhoo3 жыл бұрын
I really need to get my hands on one of these in E-white, but of course i missed out xd
@Fabio02113 жыл бұрын
If you still care, today the e-white cases have finally arrived. I just ordered one. In the past few days I was about to order a black one but luckily I hesitated. I would have been very upset XD
@noelang3 жыл бұрын
very nice!
@Donbros3 жыл бұрын
Spacebar is good but the more upper keys the more clack. But not bad
@MechMerlin3 жыл бұрын
Thock is neither good nor bad and the same goes with Clack!
@JennoCuber3 жыл бұрын
Holy poggies
@versacepelican3 жыл бұрын
In your opinion does r2 pc plate need standoffs screwed in
@MechMerlin3 жыл бұрын
You don't have a choice, they're molded into the plate.
@ubberJakerz3 жыл бұрын
I don't use any of the standoff screws for my r2
@ilumkeebs26253 жыл бұрын
@@ubberJakerz there should be 2 types of screws included , use the shorter one.
@ubberJakerz3 жыл бұрын
@@ilumkeebs2625 I didn't use any. It's just floating.
@ilumkeebs26253 жыл бұрын
@@ubberJakerz oh my bad, i misread you don't HAVE any screw lol
@Luke-we9gj3 жыл бұрын
dudee what mouse do you use, i have to know
@MechMerlin3 жыл бұрын
hey hey its the QMK/VIA powered mouse from ploopy. www.ploopy.co/
@daegan003 жыл бұрын
That’s great news. I really dislike the transparent pc case I have Edit: dammit, the grey is already sold out.
@i80x3 жыл бұрын
Still in stock on Keygem
@PockieGame3 жыл бұрын
can you build this from scratch?
@ee1yd3 жыл бұрын
if you order all the parts separately
@Niloc19222 жыл бұрын
Idk I much prefer the sound of the aluminum case.
@MechMerlin2 жыл бұрын
Lots like it!
@umi63763 жыл бұрын
Can u link your Japanese keycap set please. I have the same but with blue legends.
@dumbasfducc64573 жыл бұрын
s
@umi63763 жыл бұрын
So I'm safe to stay with my mk2 then 😂
@MechMerlin3 жыл бұрын
I ended up selling my mk2 as it became such a disappointment to me
@umi63763 жыл бұрын
@@MechMerlin disappointed? What's the reason if I can know ? I love mines has no issues and sounds amazing
@MechMerlin3 жыл бұрын
@@umi6376 I got the hotswap unit, and it is so incredibly stiff. I built a soldered unit for a customer and it was so much better.
@umi63763 жыл бұрын
@@MechMerlin I have both units hot swap and soldered to me both feel equal the same although I did notice the hotswap slightly stiff but I put in some o rings on the screws and the stiffness is gone. It's a top tier board in my opinion after going through many keyboards in my 3 years into the hobby
@MechMerlin3 жыл бұрын
@@umi6376 My experience is very different than yours then. I was very thoroughly disappointed in the kbd67mkii. You can actually catch the customer build I did here where I was very happy with it. Unfortunately I would not classify the kbd67mkii as a top tier, even if I had the customer's unit. Too many things about it that didn't feel all that great. I would actually rank it as the worst 65% that kbdfans has sold in terms of sound and feel.