Unclog, fix crack, flush windshield washer fluid nozzles on Opel Vauxhall Meriva B

How to fix a clogged windshield washer fluid spray nozzle on an Opel or Vauxhall Meriva B. The full tutorial with repair and plastic welding of cracked part and flushing of the nozzle in reverse.
Needed tools:
- Needle nose pliers
- Torx t25 bit and driver
- Syringes with tiny needle
- Sewing needle
Timestamps:
- Unscrewing bonnet trim Torx t25 01:00
- Unplugging fluid feed pipe 01:55
_ undoing clips holding down trim 03:00
- Removing nozzle jet from trim 05:28
- Unclogging and flushing nozzles 06:50
- Welding cracked plastic 17:14
- Testing jets 21:36
- Reinstall in car 22:10
- Final test in car 23:10
If you liked the content and want to support the channel for free, please click a link below next time you need to make a purchase of anything on Amazon US or UK. It will be at no extra cost to you and I'll greatly appreciate the small commission this will send my way. Thank you
USA amzn.to/36pD98t
UK amzn.to/2NBpKBH
Stuff I use to make videos (for those curious/want to start youtube)
- Videos shot on my Huawei p30
- Lapel Mic: DIY made from old headset parts
- Microphone for voiceover: Guitar Hero Konami microphone
- Video editing software: Movavi video editor plus 15 www.theprofitfa...
- PC Screen capture & secondary editing software: Camtasia 9 www.theprofitfa...
- Audio editing and speedup: www.audacityte...
- Main laptop: Huawei matebook 14 Ryzen 4800H
Disclaimer: Some links above are affiliate links and can be used at no extra cost to you if you wish to support this content. If you don't want to use them, please proceed to your local Amazon website/google and do a product search on it directly. As always, my advice is to go to a local store and touch and feel any physical product so you know what you are about to order online.

[@selymi70]

Nagyon köszönöm, sokat segítettél. Látom ha olajszűrőt akarsz cserélni le kell bontani az ablaktörlő lapátot is, és a szellőző rácsot is a szélvédő alatt.

[@diyroby732]

Szivesen. Biztos? Szerintem ezt nem kell megtenned, hogy elérd az olajszűrőt. Tekintse meg ezt a videót kzbin.info/www/bejne/fJTChHeEa9Rraa8

[@_isthisreallyit9610]

Great video thanks, I have same repair needed for my 2011 Meriva B 1.7CDTI automatic. Quick question please, what is that black "fabric" that you had to remove starting at 4m16s into this video (on fast forward) as I have same material under my bonnet, I guess I have to remove mine also to get to the clips? Thank you.

[@diyroby732]

Hi, its the under bonnet sound insulation fabric to reduce motor noise. Yeah, it needs to be removed to get access to more plastic fasteners

[@_isthisreallyit9610]

@@diyroby732 Thank you!

[@_isthisreallyit9610]

@@diyroby732 Hi again, how do you get these off? Just had a go and they won't undo. Tried watching your video again at 4m16s in on the slowest setting KZbin allows and still don't understand how you remove all three of these fasteners? You don't have the original video not speeded up do you? Thanks =)

[@diyroby732]

they have 2 small rubber/plastic wings on the inside that prevent them coming off. You will have to pry them off with somethiing that allows you to lift uniformly. Like those fork tools. In the original video, I used a flat head screwdriver or butter knife to pull them out slightly, then with both hands, I pulled 2 sides of the fastener slowly (almost like pulling up 2 ears of a something/one), rotating anticlockwise till they popped off. You may break them though, especially if they are old, so be careful and ready for this.