UNCLOG YOUR TELL-TALE OUT FLOW & FIX YOUR SPEEDOMETER!!

In this exciting episode I show the views how to properly UNCLOG their tell-tale outflow and fix their speedometer! Hit that play button and check it out! Please subscribe! Like the face book page! Follow me on Instagram @Chrispowellfishing Thanks for watching!
chrispowellfishing
chrispowellfishingtv

[@dianakesl1814]

My tell-tale wasn't working after i cruised around at low tide in the gulf and got it stopped up. I usually can get it flowing with a piece of wire I carry onboard but this time, nope. I changed the impeller and I'm working on putting the lower unit back on. This is why it's always good practice to flush your engine after muddy fishing trips and not be lazy. Salty mud can harden in your engine block and cause a lot of wasted time and money. ( Rusty)

[@pkrstrdonk]

New boat owner and you helped me solve my problem. Thank you!!!

[@dannilaser16]

Wood up, wood up y’allllllllll?

[@jeanang8711]

Hey Chris, how are you. I have the similar engine in mercury bigfoot 60 2 stroke. My problem is that i have changed the thermostat, poppet valve and the water pump and still no water is pumping in the cylinder. The engine is overheating at idle and the tell tale is working fine. I thing there is something obstructing the water as the engine is in 1 piece can't really do much. Can you help please Thanks Man.

[@thangknowa2567]

Now put a new handle and some stem packing in that spicket! ;)

[@joelleker8343]

50hp Yamaha 4 stroke, built in 2017.This is what worked for me when no water was coming out the tell tale when the motor was running in a large bucket of water. My motor has the garden hose fitting for rinsing with the motor off. What I did to unblock it is simply put my finger over the tell tale orifice to back-flush the line while I had the water running through the hose fitting, which worked great!. Hopes this helps another fellow boat owner!

[@kylelindborg6968]

Hey man, my motor has been giving off some steam and I think this might be the issue (at least I hope lol) Thanks for making this content its been super informative and hopefully it will all work out.

[@cjmaupin4]

Weed wacker line

[@teamreeldealhighlandstx5075]

Hello. I am having a problem with my Yamaha 70 2 stroke . It's not passing out water from the pump.out the hose. Not sure if it's clogged up or needs a new impeller. Are you anywhere close to Highlands tx. Just need some advice or help . Thank you very much...

[@andrewdisney8475]

Muddobbers and some wasps and bees will plug that for you!! LGBFJB!

[@randallcorbello2857]

Dude, you need to read air compressor safety, because spraying out here in your mouth could’ve got air underneath the skin

[@randy1ization]

I think the same thing happened to my 115 yamaha, it was pumping on the muffs. the stopped and the alarm came on.

[@biffagump8B]

Great video. Made me re-think my similar problem. Found the "salt" plug and cleaned it out. Thank You.

[@ivaningram2031]

Will a clogged pee hole affect high rpm performance, every time I hit sand it'll bog down when I'm 4500 rpms or higher.?

[@chekasout1781]

don't do lawn until faucet is fixed!!!!!!

[@ChrisPowellFishingTV]

Chekasout 1 😂😂😂 thanks for watching man! 👊🏻👊🏻

[@ia6980]

If water is sputtering at high rpms , no steady flow, but normal flow during low to mid throttle?

[@echabot2721]

So in order for the tell tail to properly pee you need to get the motor to a warmer temperature?? That would make sense when I try it in a barrel that it doesn't flow immediately??

[@Whalermansteve84]

I had the same issue with my 50 Merc. Took the lower off and sprayed water up the water pickup tube and flushed all the gunk out.

[@renet1148]

How simple is this? Tried it on my johnson outboard before replacing the impellor since no water was coming from the tell tale. Problem solved. Thanks!

[@Fyer]

great vid. you could blow it out in the other direction. The clog was made the same direction.

[@bigmike2000mb]

It’s a vacuum breaker. You should get a new handle.

[@lolema1]

you are pretty funny and i guess you may be late for work. the info was good, now i got mine in the garage i'll check it out too

[@edmaerkl7121]

I use a marinade syringe filled with water,carry it on the boat so you can use it any time.

[@elimonjal]

great, thank you.

[@catfishstalkeroutdoorswith530]

Thanks for the video

[@MurrayEstes]

I use my zodiac to get me to outer reefs in Hawaii for surfing. Same problem. Aloha :) Surfing CPA .....

[@bakervinci163]

Great video on fixing broken spiget

[@rodneyjohnston6280]

If a one to watch a clown I would have went to the circus

[@josemj059]

Jaja 😂 you aré siriouly funny 😄 men . Thanks

[@newhavenchristianministrie6721]

Thank you Lord indeed. 👍

[@chiendo8460]

No idea what you did

[@Hitlersboytoy]

The mowing comment killed me. lol

[@ia6980]

Nice humor!:)

[@lamarflanders4374]

some of the best advise that I got yet

[@osbornebay944]

Good show Chris, like your accent , thx

[@tarheeldude26]

Very helpful video. Thanks for sharing.

[@shadole23]

what the motor?

[@mikebadilla6970]

Thanks

[@kennystrange8705]

Great tips!! 👍

[@davidcooper2483]

Good info!

[@ChrisPowellFishingTV]

david Cooper thanks for watching man!

[@andrewcampbell3729]

good info and you got style dude well done

[@joee681]

👍

[@jimlawrence6930]

You saved my day! Great video & fun to watch.

[@brendabullock5158]

Thank you very helpful x

[@Dipshitfishing]

food stuff

[@cliffBMRC]

Excellent..Thanks for the lesson and valuable time.

[@waltercasana6415]

awesome. thanks. helpful video.

[@ROLFCOPTERZZ]

My boat doesnt have have a tube going to the telltail

[@annettekeene4100]

Can you tell me why my outboard also has water coming out the rectangle hole below the tell tale hole

[@bobmckenzie386]

Couple of items to change. first don't point air gun at your face. Kids could see you do this. Second blow air thro' the hose from the outside (reverse)

[@traderrick69]

Disliked. Too much playing around and idle conversation. My time is more valuable than to watch this nonsense.