Custom Two Tone paint job on a 84 Cutlass Supreme

In today’s video I give a 84 Cutlass Supreme a Custom Two Tone paint job with a clean factory look.

[@SprayWayCustoms]

The KING 👑 got that Cutt-Dogg shining like a diamond 👍🏾👍🏾

[@UndergroundPaintKing]

Appreciate you as always Sprayway 💯🤛🏾

[@werone696]

I love to see that my two favorite KZbin painters support each other.

[@mynsxt6]

Very therapeutic watching you do your thing, don't ever stop!!!!

[@UndergroundPaintKing]

Thank you for checking the video out and I’ll continue to put more content out!

[@brentcrawford7609]

And another top notch paint job in the books

[@UndergroundPaintKing]

Thanks Brent I appreciate you for that!

[@Rick-O-Shay60]

Owner must be a 49rs fan. Two tone lookin sharp.

[@UndergroundPaintKing]

Lol he might be Rickey, I appreciate you checking out the video!

[@aaronjhunt4954]

Man bro if you was in Virginia I would definitely be getting you to paint both of my cuttys .. I’m impressed with your work

[@UndergroundPaintKing]

Thanks bro I appreciate you and maybe in the future I’ll be able to do one of your projects for you 💪🏾

[@eaj2900]

Man this is hard! During my initial visit to Crenshaw Blvd in Los Angeles in 2003, I spotted a Cutlass cruising up and down the street with its factory steel wheels and authentic Oldsmobile hubs, all the while boasting the identical wine and tan two-tone paint job.

[@UndergroundPaintKing]

I appreciate you checking it out EAJ2900💯💪🏾

[@MrManushe]

that looks so good king.

[@UndergroundPaintKing]

Thanks MrManushe I appreciate you checking out the video!

[@BLACKRAIN390]

GREAT GUN CONTROL AND PAINT JOB FAM!!!!

[@UndergroundPaintKing]

Thanks bro I appreciate you!!!

[@theoldfartsgarage]

Thank You so much for this video because I’m painting my truck two tone , and I would not have thought to paint the light color first , makes a lot of sense to do so. Thank You. The Cutlass looks great 👍🏼👍🏼

[@UndergroundPaintKing]

Thank you for checking out the video and I’m glad you found the video useful!

[@LakesideAutobody]

Nice UPK - very cool colors :)

[@UndergroundPaintKing]

Thanks Jerry I appreciate you as always my friend!

[@arturoguerra1249]

Hey Brother I feel the confidence you speak you should be a millionaire brother I've been watching the work you done you do good I feel you stand behind your work also with your kids watching the work you do and the skill and hard work you put into it they're going to go a long way also great job

[@UndergroundPaintKing]

Thank you Arturo I really appreciate that from you 🙏🏽 and appreciate you checking out the videos and I work to be that millionaire one day!!!

[@nearheaven5311]

Another excellent job. Well done!!!

[@UndergroundPaintKing]

Thank you I appreciate you checking out the video!

[@CBGRAPHICSAirbrushArt]

Great job as always 🔥🔥🔥

[@UndergroundPaintKing]

Appreciate you CB for always showing luv💯🤛🏾

[@swc-diygarage]

Great job UPK looks amazing.

[@UndergroundPaintKing]

Thanks I appreciate you S W for checking out the work!

[@jamesadams3476]

Awesome job upk. Looks great

[@UndergroundPaintKing]

Thanks James I appreciate you checking out the work!

[@downfour47304]

Looking good my guy! Nice job!!!

[@UndergroundPaintKing]

Thanks fam I appreciate you checking out the work!

[@johnsmith-qz4bv]

i really like the color combo ..it turned out awesome nice work .....

[@UndergroundPaintKing]

Thanks John I appreciate you checking out the work!

[@vocals4378]

Really good paint job 👍

[@UndergroundPaintKing]

Thanks I appreciate you checking out the work!

[@randypatterson8201]

That looks great. Would love to see a part 2 with the new hood. Keep it coming my friend

[@UndergroundPaintKing]

Thanks Randy and I’ll be dropping a part 2 with the hood soon…appreciate you checking out the video!

[@sl369]

Good work as usual keep bring them 💯💪🏿🙏🏾

[@UndergroundPaintKing]

Thanks Elco I’m gonna keep the footage coming 💯

[@abelmolina8668]

Amazing work keep it up

[@UndergroundPaintKing]

Thanks Abel I appreciate you checking out the work!

[@damincobozeman8921]

Say king that's how I be looking to be spinning to much time in Da shop trying to get ruff! 😆 Big Buck's 1 stop whip shop!

[@UndergroundPaintKing]

What it do Buck💯💪🏾

[@damincobozeman8921]

@@UndergroundPaintKing trying get king still grind in this shop going through Da motions fam! Trying to make it do what it do wetting up everything

[@UndergroundPaintKing]

@@damincobozeman8921 that’s what’s up bro, it’s good hearing from you fam, send me pics of what you’re working on

[@damincobozeman8921]

@@UndergroundPaintKing 4sho I'll do that monday. I need a few pointer on a 2tone paint job I'm bout to do also I'll hit u up tomorrow after church

[@UndergroundPaintKing]

@@damincobozeman8921 ok Fam, talk to you soon!

[@Ram010108]

Loving the orange bro. Top notch work as always 👍👍

[@UndergroundPaintKing]

Appreciate you checking out the work Cartia💯🤛🏾

[@PHARRAWAY]

That is looking nice UPK wow

[@UndergroundPaintKing]

Thanks Pharraway it’s coming together…I appreciate you!

[@thecanman132]

Nice bro!!😉👍🏽💯

[@UndergroundPaintKing]

Appreciate you checking it out O. G. !!!

[@juarezcustombuilds]

Great vid

[@UndergroundPaintKing]

Thanks Juarez, I appreciate you checking out the video!

[@yeayeasautoadventures1161]

milkcrates,for us short peoples,im so heavy I need two, nice turnout upk,Ill say it again, very nice technique

[@UndergroundPaintKing]

Definitely need a milk crate for the height challenge people lol, appreciate you checking out the video!

[@jayinmi3706]

Hope we get to see this done, I'd love to see the top working. Wasn't sure about the color combo, but it looked a lot better after the clear!

[@UndergroundPaintKing]

Here is the video with the car put together Jay kzbin.info/www/bejne/l2WrfoqPfqmah6s

[@Grant7]

So clean my man.....

[@UndergroundPaintKing]

I appreciate you checking out the work bro 💯

[@killapop8471]

Looking good bro 🔥 pressure

[@UndergroundPaintKing]

Appreciate you KILLA💯🤛🏾

[@nomuswole4456]

EzPZ straight fire , glosss came out A1

[@UndergroundPaintKing]

Appreciate you Nomu💯

[@amendippanesar]

Epic bro

[@UndergroundPaintKing]

Thanks I appreciate you checking out the work!

[@mr84ttop34]

That’s is 🔥🔥🔥🔥💪🏾

[@UndergroundPaintKing]

Thanks bro I appreciate you checking it out 💯🤛🏾

[@mr84ttop34]

@@UndergroundPaintKing No problem!

[@Gomer8759]

Like the color scheme. Nice work! Those are some long doors!

[@UndergroundPaintKing]

You’re definitely right, those are some long doors…I appreciate you checking out the video!

[@areasonablethought610]

I remember them heavy ass doors when I had my regal😂.

[@UndergroundPaintKing]

@@areasonablethought610 same doors

[@thabigghomie_]

🔥🔥🔥🔥🔥

[@UndergroundPaintKing]

Appreciate you checking out the work!

[@datdudetheyhate4121]

New subscriber ima fan I love the content I’m learning a lot. God bless bro do u know how to prep a garage for paint any suggestions

[@UndergroundPaintKing]

Thanks bro I appreciate you subscribing to the channel and the best thing for your garage setup is lighting and air flow for when you’re painting…how do you have your garage setup right now?

[@brandonjackson5737]

Gotta paint my cutty bro 🔥

[@UndergroundPaintKing]

You painting it a Two Tone?

[@brandonjackson5737]

@@UndergroundPaintKing naw bro I wanna do a flip flop paint 🎨 I wanna bring it to you

[@UndergroundPaintKing]

@@brandonjackson5737 we can figure something out once I have space for you

[@yoursettings8795]

Hey UPK! Great video man learn so much. I had a quick question I’m thinking of spraying my car A Mazda Red 46V I heard bad reviews about the paint and I was wondering if you’ve ever sprayed that color? I even seen a video where they used an extra 3-4 coats since the paint is “thin”. Just need a little more understanding on it. Like always great videos 🔥.

[@UndergroundPaintKing]

I appreciate you checking out the videos and I haven’t sprayed that color but I would imagine that if you have heard of it being thin it could be a cheaper brand being used and possibly causing it to not cover well…it’s a few things that could play a part of it getting bad reviews but I think it could possibly still be a good choice if a quality brand is being purchased

[@husky1232]

Always looking out for you upking nice to see you great job how long do It take you to put the first coat of clear and are you using slow hardner? Thank you for the video upking stay safe

[@UndergroundPaintKing]

Appreciate you Husky as always and it takes me 30-45 minutes to lay down my first coat of clear depending on what I’m spraying

[@greggriffin3242]

Look n good!!!What gun are u using for the clear

[@UndergroundPaintKing]

Thanks I appreciate you and I was using my Tekna clear coat gun by Devilbiss

[@dlight777]

Great work!! What size compressor are you using?

[@UndergroundPaintKing]

Thanks I appreciate you and I’m using a 80 gallon compressor

[@zanaga1901]

I tried using hvlp with the small compressor got and it got a lot of orange peel sanded it down with 320 and applied basecoat about 3 coats and about to apply last coat of clear on the hood top and front right and left panel. Gonna take the hvlp gun back to Harbor Freight I actually have two be better off just selling both of them because can't paint good with them with the small compressor got anyway. Harbor Freight don't see any lvlp spray guns so gonna have to get more from Ali Express.

[@rich16013]

So you need typically between 15-25 CFM to operate a quality HVLP spray gun perfectly while to operate a conventional spray gun you need 11-15 CFM.

[@jackclayton7419]

King, do you have any videos detailing the paint stripping process for an entire car. I didn't see one. Do you use the Eastwood SCT only for this? Thanks

[@UndergroundPaintKing]

I don’t have a video stripping a entire car but you definitely can use the contour sct to strip the whole car…media blasting is a great way to go as well if done correctly

[@drumluck69]

Nice. What gun did you use for clear?

[@UndergroundPaintKing]

It was my Tekna clear coat spray gun by Devilbiss

[@lewismartin9980]

Primer gun video in the near future..thks Upk

[@UndergroundPaintKing]

I’ll try to work on a primer gun video

[@werone696]

Makes me want to get another G body. Is that the Black Widow gun?

[@UndergroundPaintKing]

Yes sir it is the black widow

[@johnnycashh7148]

UPK, great vid! Question..I'm going two tone with a narrow black stripe in between the top and bottom. Should I bring the top (red) all the way down to bottom (silver) and spray over the red with my black or leave the gap and tape both sides to get my black on? Thinking the lines might not be too thick if I bring the red down. Appreciate you bro!!

[@UndergroundPaintKing]

I appreciate you checking out the video and you definitely can bring the red down to the silver then tape off for the black and it shouldn’t be to thick but if you feel that it is and you want it to be smooth and it’s in your budget you can do a flow coat and bury your lines

[@johnnycashh7148]

@@UndergroundPaintKing thanks bro, just to add I'm going to spray single stage.

[@gregoryallen5018]

What kind of clear did you use??? Would you send me the link?? You did that big hommie!

[@UndergroundPaintKing]

I get the clear locally but you can check out the Grant 7 Oh My Clear at BuyCustomPaint.com which is the other clear that I use

[@cgippie2008]

SLICK!!!!!

[@UndergroundPaintKing]

Thanks Christopher I appreciate you checking it out!

[@3rekoatskustoms929]

Another show stopper. Do you decided or does the customer where the 2 colors meet?

[@UndergroundPaintKing]

Appreciate you and the customers decide

[@corygene6477]

How long did you let the 1st base color dry before you taped it off to do the 2nd?

[@UndergroundPaintKing]

I normally wait 30 minutes to a hour

[@craigcarter5276]

Did you paint this with that 30 gallon air compressor ?

[@UndergroundPaintKing]

No sir this is with my 80 gallon compressor

[@lifequest7453]

Wait, how long do you wait till you can put tape on the fresh paint for the second color????

[@UndergroundPaintKing]

I personally like to wait 45 minutes to a hour before I lay my tape

[@waynedavis7245]

The cutless looks good. What gun did you use ?

[@UndergroundPaintKing]

I used my black widow for the base color and my Tekna clear coat gun for the clear Wayne

[@waynedavis7245]

@@UndergroundPaintKing thanks king .

[@UndergroundPaintKing]

@@waynedavis7245 you’re welcome!

[@MrOT903]

Let’s gooooo

[@UndergroundPaintKing]

Appreciate you Big Country!

[@chrishicks4506]

I use same gun, You spraying with fan wide open?

[@UndergroundPaintKing]

Yes I am Chris

[@randyanderson6110]

How long do you wait to remove masking tape after spraying?

[@UndergroundPaintKing]

I like to wait 30 minutes to a Hour depending on the materials I’m spraying Randy!

[@robertsalcido2028]

Hey how long do you wait before masking off the bottom half of the base coat. I don’t wanna put tape on too early and have it peel off

[@UndergroundPaintKing]

I usually wait 30-45 minutes before I start taping, I want it to flash off real good

[@robertsalcido2028]

@@UndergroundPaintKing cool thanks for knowledge big dog. I was worried about masking the base so I appreciate the quick reply and solid video. My lines came out solid 🤙

[@UndergroundPaintKing]

@@robertsalcido2028 nice 💯 glad I could help!

[@lonniedavis4462]

Whats going on I see the jams wasn't sprayed do you think you could show a two tone paint job where you do the whole car? Now I'm asking this without looking through all your videos

[@UndergroundPaintKing]

Yeah I don’t really show spraying door jams because I try to make shorter videos but if I have another two tone job come my way I’ll put it in the video

[@nicholasrodriguez8502]

How long do you let the first color dry before it’s safe to tape it up and do the second color?

[@UndergroundPaintKing]

I personally like to wait 45 minutes to a hour

[@nicholasrodriguez8502]

Thank you. I’m doing a two tone paint on my truck. I rented the paint booth for 8 hours so wanted to make sure I can do both colors in the same day.

[@UndergroundPaintKing]

@@nicholasrodriguez8502 nice! Good luck to you on your truck💯💪🏾

[@scottpaul4487]

Wow another awesome video , what is the gun is it the black widow cheers

[@UndergroundPaintKing]

Thanks Scott and yes that is the Black Widow

[@scottpaul4487]

@@UndergroundPaintKing I thought so thanks for the reply 👍👍

[@UndergroundPaintKing]

@@scottpaul4487 you’re welcome and I appreciate you checking out the work!

[@scottpaul4487]

@@UndergroundPaintKing all good your videos are informative and awesome the way you break down how painting can be done by non professionals in a garage to help save people thousands of dollars but get the same job a shop would do . I wish I could get the black widow in AUSTRALIA But I can’t seem to find anyone selling them in my country .

[@UndergroundPaintKing]

@@scottpaul4487 I do my best to help out my people to do this kind of work without breaking the bank and it sucks that you can’t get the black widow there🤔 gotta be a way to get you one

[@Phrozen716]

How gallons of paint you need to paint that Cutlass .. G body .. also clear coat..

[@UndergroundPaintKing]

Half a gallon of each color with a mix ratio of 1:1 which gives me a gallon of each color when reduced, and I used 1 gallon kit of clear

[@outlaw_t6682]

How do you prevent getting a hard tape line when doing two tone?

[@UndergroundPaintKing]

I use a fine line tape that helps with the hardline which I used for this job along with another two tone job I showed on the channel…also if you have enough clear you can cut the clear then do a flow cut and get rid of the hard line

[@outlaw_t6682]

@@UndergroundPaintKing 💯

[@romeyrome3219]

Hey I have a question for you I know you're not shooting a single stage on this 2 tone but I did. I waited 8 hours for the bottom half to Kier it wasn't tacky to the touch so I masked it off with the 3M painter's plastic so i cam paint top half. Top came out really good went to unmask the bottom half and the plastic stuck to it leaving plastic marbling make designs in the paint. Did I not Wait long enough to let it dry before I before I messed it off and is there a way to get that nasty mark ls out

[@UndergroundPaintKing]

You may have needed a day to wait for masking, it’s hard to really give you a good answer without knowing the products you used and what’s recommended by the manufacturer of the materials you used

[@romeyrome3219]

@@UndergroundPaintKing It said 6 to 8 hours on the can. The paint was good to touch it wasn't sticking to .y hand but ya man when I remove the plastic it was sticking to it a left marks all in the paint.. Is there a way I can fix this you think if I just wet sand the single stage paint and reshoot the bottom half it would be good or do I have to strip it all down

[@UndergroundPaintKing]

@@romeyrome3219 I would let it cure good them tape off after sanding then respray it…no need to strip it

[@romeyrome3219]

@@UndergroundPaintKing OK I'm just gonna let the whole car sit for like a week or 2. Then just wet sand the whole bottom half with 2000 great and Respret.. One more question am I able to add a clear coat after everything's done it's a single stage Enamel metallic. Haven't found any videos on if you can but I was thinking if you let it cure for like 2 weeks also maybe be able to add a clear over it

[@UndergroundPaintKing]

@@romeyrome3219 I have seen people spray clear over single stage and get good results it’s just something I don’t do personally

[@harleytrott2335]

question...does anyone know how to address or prevent the build up line that is formed where the 2 colors meet (tape line build up) so that there isnt a raised portion of the paint disrupting the shine of the gloss. Its an important question for me, as i have a 2 tone job comingbup and I've always struggled with this

[@UndergroundPaintKing]

I like to use fine line tape when doing my two tone jobs and I can usually bury it with clear without a hard line issue

[@harleytrott2335]

@@UndergroundPaintKing thank you, so much

[@UndergroundPaintKing]

@@harleytrott2335 you’re welcome!

[@kendrickkennels5452]

Wet 🚿💯

[@UndergroundPaintKing]

Appreciate you Kendrick for checking out the work 💯

[@kendrickkennels5452]

@@UndergroundPaintKing YEAH, APPRECIATE YOU DROPPIN THE CONTENT. I BE WATCHING..

[@MrBhustle]

👍🏾👍🏾👍🏾💯

[@UndergroundPaintKing]

Appreciate you checking out the video Mr. Hustlehard💯

[@MrBhustle]

i got a cutlass myself. i just dont know what color to go with yet. lol

[@UndergroundPaintKing]

@@MrBhustle are you changing interior or keeping original?

[@MrBhustle]

@@UndergroundPaintKing only changed the seats. everything else is og

[@UndergroundPaintKing]

@@MrBhustle what color is it now

[@joaquinmireles3912]

What color of orange is that not.my car would've painted top.black

[@UndergroundPaintKing]

I don’t remember the name of the orange color but it’s what the customer wanted

[@dennisalstonZ06]

What's the paint code on the first color

[@UndergroundPaintKing]

The paint code is WA9308 Light Chestnut Poly

[@dennisalstonZ06]

Going to try my hand at re painting my el Camino lol .

[@UndergroundPaintKing]

Good luck you got it 💯🤛🏾

[@BearBudgetTurbine]

Change your name to the Cutlass Kiiing!!!😄

[@UndergroundPaintKing]

😂😂😂 I might have to change my name 🤦🏽‍♂️

[@rcs0296]

@@UndergroundPaintKing more like, nothing but a G King

[@UndergroundPaintKing]

@@rcs0296 😂