Mount Howard Leights to Team Wendy Using Pelter Adapters

[@k9gustoff]

No need to cut anything except the headband cover. Un snap the plastic swivel from the earmuffs and rotate 90° then pull them off. Reverse to install Peltor adapter then reinstall back to the earmuffs. Simple. Only issue I have is the length of wires being a bit short for routing through my ballistic helmet.

[@Unvaccinated100Percent]

thats your problem.

[@Jewifer333x2]

Just a quick note, you can pry the connecters right off the howard leights super easy using a screw driver. Just slip a flathead under the connector toward the end and it slips right off, causing minimal damage when removing the headset from the headband.

[@turnitdowntyler]

You will still have to cut the headband due to the cable being enclosed in the headband material.

[@welderdude1]

@@turnitdowntyler also correct but the popping of the clips means no sparks and allows for a tighter fit of the Peltor wire inserts. Use a little epoxy to prevent them from sliding off.

[@anonymous_friend]

@@welderdude1 Mine slide off. What kind of epoxy will tighten it up but not stick?

[@welderdude1]

@@anonymous_friend could be a QC thing. Mine haven't moved much.

[@drxus9609]

OMG FINALLY FOUND MODS FOR THE HOWARDS

[@drxus9609]

Is there another adapter I could use? The team Wendy peltor adapters are 70$

[@Rungunseattacos]

Not that I'm aware. Although I think there may be some fake chinese ones out there. Might be worth a shot because they are so cheap.

[@mauriciolarru3218]

A bit late but it's new soo,earmor adaptors fit and they are really cheap (15€)

[@ValerieWarner1]

@@drxus9609 Unity Tactical makes the Modular Attach Rail Kit, same price though. They do list Howard Leight as compatible though. I realize this is 3 years late, but hopefully it's useful for someone.

[@tiger9764]

Look at the ones from HHV. They are only $40.

[@212caboose]

Is there a reason why people aren't simply removing the plastic piece that the wire goes in, and just using the peltor ones? Do they not fit or something?

[@denissong2251]

Awesome video! Do you think this method would be possible with walkers razors?

[@LIV2500]

I've been looking at helmets for nvgs and was kind of bummed that I'd have to drop serious coin on expensive muffs when I've been perfectly happy with the Howard leights. Thanks!

[@DaveSmith-cp5kj]

Even though you did find this mod, I would still look to buying better ear protection like peltors sometime in the future. Ear pro last a lifetime and Peltors produce a better seal and sound amplification than the Howard Leights. With howard leights I have to use ear plugs because they don't protect nearly as well.

[@liamvosefski2795]

Old comment i know but i own a pair of leights for the range and a pair of sordin supreme pros with gel cups for my helmet invest the money for the stuff your life depends on night and day difference in the leights vs sordins tbh

[@raimundorocha852]

Como que eu faço para entrar em contato com vocês não é de querer um capacete tático

[@danieldougherty4197]

I tried to do this with my unity tactical mark said and fail miserably. Maybe cause it’s to low profile? Maybe the helmet is to big but I don’t see that size restriction on the kit. Says it works with Howard lights. Cable isn’t even long enough to go around the helmet

[@cheyneorejuela4640]

What type of rail adaptor do you need for the install of tge peltor adaptor

[@turnerstoyotas7704]

Hey brother, very helpful video i'm planning on buying a ballistic helmet where i can still use my leights. I was thinking that you could probably put a little bit of heat on the plastic and then crimp the plastic in a sense where it grips the metal rods on the adapters for a solid fit.

[@bradleyrinker2378]

What bump bungee are you using on top of your helmet? Just got a team Wendy bump and looking at adding a bungee system.

[@Rungunseattacos]

Old school Warsport bungee system. I think you can get em on. eBay though. Just search Helmet Bungee or something like that. Tactical Bungee. A mixture of those should get you something.

[@nomob6583]

Would this work on a LongFri High cut helmet with LongFri stock rails? Anyone try? Are Howard Leights as tight of fit against ears as normal?

[@tnpsheepdog3289]

Thanks dude, I could never wear the Howard Leights under my helmet weaved through the pads since I run a small/medium ops core and I have an unusually fat head! This vid is a life saver!

[@domenickdecocco3343]

Great video! I Just did this mod with a pair of Walker Razor’s. Same process to the T. I’m debating to glue mine place as a semi-permanent solution.

[@HayWoodJobLoMe]

i was wondering if that worked. I havent seen any vids of it. You use the walker razor electronic ones?

[@domenickdecocco3343]

@@HayWoodJobLoMe yeah. The Walker Razor Electronic Earmuffs.

[@HayWoodJobLoMe]

@@domenickdecocco3343 what mount did you use?

[@domenickdecocco3343]

@@HayWoodJobLoMe I went really cheap but the setup works great for me. I got a set of 3M Peltor X Series Helmet Mounted Earmuffs. Cost me maybe $18 at the time. They don’t connect to helmet rails, but each mount I have 4 zipties securing them in place. Had no problems yet.

[@HayWoodJobLoMe]

@@domenickdecocco3343 what do you use the ear muffs for? the ones i saw just have a cheap head band

[@dewdlergaming2798]

Could you do this by on an arc rail instead?

[@swiftey3973]

So are u able to attach a boom microphone to the impact headphones and be able to communicate or no. If you can reply it would be very helpful thanks.

[@GunsNBudder]

No, they're only earmuffs, no comms.

[@welderdude1]

I just pop the clips on the earpro amd cut the fabric cover for the head strap. A lot easier and no sparks. They are made to pop off. I have another set on the way for my Guarddog LVL3a fast lid.

[@Hofinator7]

Awesome vid. Do you think it would be possible to make a small bend in the end of the Peltor wire so that they could lock into the HL posts?

[@Rungunseattacos]

+Hofinator7 Thanks man. Honestly, I think the wires are too thick to make a small enough bend. I have any idea on how to make them lock on, but you'd need a couple pairs of those cheap howard leights. You have to cut the ends off the peltor adapter wires then smash the end to create your own flat in the other direction. But I really don't know that it would be worth the trouble. I've never had mine fall off.

[@nomad5454]

couldn't you use something like blue or red lock tight to solve that issue or use pliers to pinch the metal and cap on the Howard so it's a tighter fit?

[@Rungunseattacos]

You definitely could not use pliers. Maybe a hammer and a punch. I tried it with no luck. I also didn't try that hard because it's not really a big deal. Couldn't use lactate either because then they wouldn't slide at all and lactate doesn't bond well to plastics.

[@NitroTheHusky]

Would you recommend putting a drop of superglue on the tips of the metal rods to get them to be more secure in the adapter? I wouldn't think you'd be disconnecting them anytime soon.

[@Rungunseattacos]

I would be JB weld or an Epoxy would do an even better job.

[@NitroTheHusky]

That's true. Thanks for the video by the way it's been a huge help!

[@Rungunseattacos]

No problem!

[@tb8517]

Great video! Really liking my new comms. I also use a PTT and headphone jack to communicate via my baofeng.

[@jarontupa]

the kinda police PTT are u using? for the baofeng, i run it but with the 3.5 jack included i cant communicate. help

[@FriedPancake-gt3ij]

is there an adapter for other types of helmets for this particular headset? I got a emerson fast helm.

[@tittiger]

Thanks for the idea. perhaps flattening the Peltor adapter wire would make it tighter.

[@lagartoteyco2011]

hola el casco que usas es el FMA Ex Bump...? tengo unos Headset Earmor M32H ... quiero saber que tipo de anclajes tengo que usar para ensamblarlo...? Desde ya muchas gracias... Saludos desde Argentina...

[@drmumpower]

Worked beautifully! Very helpful - thank you!

[@landolfi1984]

Hey man thank you for your video! Just a question: what microphone or ptt are you using with the impact sport?

[@denmanfite3156]

That's got less to do with the ear pro- since they don't have a microphone anyway, and more to do with the radio you're running.

[@alohawally6468]

I know this is late but can I attach this on other helmets. Typically another brand. Thanks

[@tjv1875]

Aloha Wally Yes, you can do this with any helmet peltor adapter

[@JordanVezinaactual]

Seems better than using the Walkers with the same configuration. Those things slide right off the wires like they're soaked in butter.

[@cube1cze]

if you have problem with that half secured holes on howards just put little bit of 2 part epoxy in there that should do the work

[@ek7235]

Instead of dremeling, couldn’t you just unscrew the plastic mounts off the ear muffs and twist them off once they’re separated?

[@Rungunseattacos]

There not screwed on, thats just a clip that holds them onto the ear pro. I don't recommend removing the connectors from the ear pro because that clip can break.

[@vhonsamson6177]

awesome video bro, any chance you can send me the link where you bought your helmet pls..cheers

[@PhoenixFeatherAirsoft]

great video. going to try this

[@philfortner1805]

Simple fix for coming off: just glue them in place! Awesome video man!

[@bizzlesnach]

Nice tboc patch

[@danepresler4765]

I did it to a pair of walker razor. Worked great

[@Knightfall572]

Just saw your reply. Was the process similar? I'd hate to invest in Arc rails and cut my Walkers to find out it doesn't work. Thank you in advance.

[@augustcerera832]

Dane Presler please make a video or tell as about it and what you use to make it work?? Very interested also:)

[@its_not_troy8098]

Awesome vid! Thanks for the help. :) Gonna buy some adapters, and do it!

[@that_gun_guy_8687]

very helpful video, thanks for putting it up!

[@feREXtheBLUE]

Why not just use the Peltor Sport Tactical 100's? they are the same mounting bracket as the comtacs so any mount will work for them.

[@jetnazareno]

could you remove the wire from the head band that it is on?

[@JOExSPARTIAN]

Great vid man, Was able to do mine really easily.

[@Rungunseattacos]

+JOExSPARTIAN Awesome man. Glad it worked out for ya!

[@ohyahlinkinpark4life]

Can these fit under a helmet?

[@DaveSmith-cp5kj]

No. These adapters only fit to the arc rail. I have made little fabric straps for use with HL ear pro under a PASGT helmet, all you need is a little nylon webbing and velcro and just copy the Peltor fabric headband.

[@ironrangerw6r1]

Awesome man. I'm using the Walker razors. But I'm pretty sure it will work out very similar. Thanks. There are literally like two videos on KZbin showing this mod. Thanks brother

[@alexgigler5577]

Hey! did you ever end up doing this with your walker razor? If so, how did it work out? I'd like to do it to mine here soon.

[@clamum]

@@alexgigler5577 Look in the comments, someone did it with Razors and said it worked (process was exactly the same).

[@alexgigler5577]

@@clamum hey thanks for the reply. I actually ended up doing it myself and it worked out pretty well. The only issue is that the wire on the razors is not as long as the wire on the other ones so it can be kind of tight around the back

[@JaxActual]

Great vid man, I have a question. How do you remove the little plastic clips that come on the TW adapters? Do they just pull off?

[@Rungunseattacos]

+Banana Milsim Yup, they just pull off the same way the howard leights do. Just rotate em the correct direction and they'll pop right off.

[@JaxActual]

+undertheshadowhc Awesome, Thank You!

[@kylem2248]

I did this mod today, and they are sweet!

[@stillnupey02]

excellent video

[@XXXNemesisAirsoftXXX]

Pics/vid wearing it?

[@Rungunseattacos]

+Zero Milsim img.photobucket.com/albums/v683/undertheshadowhc/Sparks%20and%20Stuff_zps7b25fkw8.jpg

[@WEIDYNASTYMONK]

nice set up...liked and subscribed

[@TackshooterOG]

Link to the Adaptor?

[@Rungunseattacos]

You can find em on TNVC's website, just search for Peltor Adapters

[@TackshooterOG]

I Have peltors and the adaptors on my work helmet, but thats Issued gear so this will be a fun mod for my personal gear.

[@Teds_Talk]

Nice video!!!!!

[@rhesho3]

what is your helmet ?

[@umbragladium]

Team Wendy

[@confessionsofastayathomeda6851]

I just took themuffs right off those plastic things and connected the muffs to the new ach connects. I got the Unity MARK adapters. You made it to complicated.

[@danieldougherty4197]

ConfessionsOfAStayAtHomeDad can you help me with what you did? I followed the video and my Howard lights will not work. Way to much bending to get the head sets out and rotate.

[@brentholladay3113]

A flat head screw driver works better, just bend the clasp a hair, snd she’ll pull right out (2:32)

[@HellRainsFromAbove]

Nice vid thanks bro

[@rich9792]

Sweet! Thanks!!!

[@thehourshower]

How about just buy the Peltor 100's?

[@tjv1875]

The adapters fit the Peltor comtac, not the 100’s

[@cedriccollins8771]

You should try a dab of epoxy if you want to add a little bit more security to it.

[@clamum]

I don't care for my Howard Leights but I like that they're electronic and I can actually fucking hear people. But Christ they do not seal well at all, even with upgraded gel ear cushions. Fucking electronic ear pro is expensive.

[@101Navyseals]

I feel like if you can afford a team Wendy then you can afford Peltors or OTTOs

[@Rungunseattacos]

I own Comtacs, Sordins and AMPS. Couldn’t afford them all at the same time though. Helmet came first, good comms came much later. Also, a lot of people run the LTP, about a $250 helmet. New Comtacs are $450-$600 for single comm.

[@roninsixx3541]

Somewhere there is a gear snob watching this convulsing

[@Rungunseattacos]

1000% 🤣🤣🤣

[@mustangstevegt]

ha! was wondering if anyon did this

[@longgone9869]

Hey save yourself a step and don’t remove them from the headband just cut the wires

[@Nick-hm9rh]

the first drums are straight outta reach

[@seantbr2019]

I just use the peltor 6s tactical slim

[@tjv1875]

It fits on the comtac attatchment?

[@operatorlimes7564]

You should get into airsoft bro lol nice video