UNI-T UT123D CHEAP-O Multimeter Review & Teardown!

[@SasukeDG]

I found this channel 2-3 days ago and I'm totally addicted. Very good review and teardown :D

[@KeepOnTesting]

Awesome 👌 welcome aboard 👍

[@target2256]

I HAVE A VERY IMPORTANT QUESTION: Can those who use this device answer, when you manually switch to diode, capacitor, ohm levels, does the CLICK CLICK SOUND come from the DEVICE, can you please answer?

[@philipaziz4688]

Many years ago Fluke had an el cheapo line and was similar to these. They were convenient and fits in your service bag. If things got to hairy you pulled out their big brothers to do the job. These are great all purpose meters with a basic purpose.

[@halrhoads6194]

Nice! Soon to be a new addition to my collection. Thanks for this one, Darren.

[@KeepOnTesting]

Cheers Hal! 👍 it will make a great addition to your collection 😉

[@ericchang7706]

Very entertaining review! haha. I've been pulling tons of weeds in my garden too.

[@KeepOnTesting]

It never ends eh ? Weeds and dandelions are always the winners 🏆 😉

[@suplado7583]

the continuity with led glow up is very important because sometimes you cant hear hear the buzzer in loud construction environment. i'm sad its not glowing. sorry bad english

[@KeepOnTesting]

I totally agree 👍

[@徐愷輪]

Not a fan of those “full auto”multimeters but uni-t seems to do them right.

[@KeepOnTesting]

So true!

[@rizzulazzi]

HI Darren, I bought one UT123D when ordering an UT 123. I was tired of another Smart meter, (ZOYI ZT-S4)(You have reviewed a similar one). It would not light LEDs which have an antiparallel protection diode . Other meters, even cheapest ones will do. Before storing it in the "retired meters for sale" drawer, I decided to buy a cheap UNI-T: I have some other, and I'm sure they work. My opinion is :Nice cheap small instrument, Precise, Easy to use -Good display, , I'm missing the foldable stand(why?) Instructions were in Chinese only. Too cheap probes Even mine does not light the front LED in continuity check. Thank for your review.

[@KeepOnTesting]

Hi Maurizio, excellent choice ! Too bad they neglected the tilt stand or magnetic backing otherwise it's a solid multimeter! 👍

[@rizzulazzi]

@@KeepOnTesting I've used it for two weeks, and it works as I like, with one little bug : I prefer the "dumb" mode, but it has a defect: it defaults to AC volts. It is aimed to electricians, not to "electronicians".. It is a bit annoying, but I've see a really reliable operation. In the meantime, I've ordered a second UT-61(new version) Thanks to UNI-T

[@examplerkey]

A meter that does μA-20A, μV-2kV, 0-GΩ, pF-mF, semi-auto, manual dial, normal LCD, min max, rel, temp, is the best meter. Any recommendation?

[@KeepOnTesting]

Doesn't exist unfortunately... Lots of decent options though..depends on your budget. UNI-T UT61E+, HABOTEST HT118A, SANWA PC7000 all great multimeters..👍

[@yambo59]

Not too bad, UniT seems to try harder getting these right, too bad about the diode indicator light wouldve been a real plus.

[@KeepOnTesting]

Not sure how UNI-T missed that one...otherwise great little dmm !

[@bat21]

Can we all chip in and get Darren a 5mm Red LED please Another great review A+

[@KeepOnTesting]

Awww shucks...thx Chris 😉👍

[@seangannon193]

when are you going to get a CEM in to look at, they look very good quality

[@KeepOnTesting]

I'll definitely be reviewing a CEM by July... hang in there 👍

[@CheapCheerful]

Love your review style and enthusiasm, thank you.

[@KeepOnTesting]

Thx my friend! Love your handle! 👍

[@oynamalan]

UT123 don't have diode mode ?

[@elhadjhocineachour8988]

Thank you for this valuable review, my question is: I'm doing a lot of diy, home work, some cars, for my budget i have to choose between unit 123d and proskit mt-1236, what do you suggest? Thank you

[@KeepOnTesting]

Definitely the UNI-T UT123D! MUCH better multimeter and higher quality 👍

[@numerical_error]

UT123 is a great meter. You get so much for less than $15. But UT123D has gone plus ultra. A lot of people would welcome the addition of current and capacitance modes. The diode mode is close to perfect. And the resistance range has doubled. Just like you, I’m a little disappointed that UNI-T didn’t utilize the visual indication on continuity mode. Also the NCV mode worked better on UT123. Other than that there isn’t much to not like about it. 👍 Oh, and “Put that cheap-o against a Fluke” is a great idea for a regular segment. It’s not as destructive as bashing bad cheapos with a hammer. All in all, a physical punishment isn’t an effective way to correct behavior. Just shame them enough to make them think about their actions and to want to grow as a multimeter. (I’m in a goofy mood today for some reason)

[@KeepOnTesting]

Ultra is great way to put it ! UT123D is definitely the next step and lots of improvements make it a worthy successor.

[@abasschn830]

Hallo bro. Rm113d vs et8101 what the choice. Thanks Sorry if the text is wrong

[@KeepOnTesting]

RICHMETERS

[@abasschn830]

@@KeepOnTesting ok thank u sir. I think your favorite is et8101 Because rm113d = 3,5 star And et8101 = 4 star Hehe.

[@KeepOnTesting]

@@abasschn830 ET8101 is a nice dmm..after prolonged use however I find the RM113D slightly more accurate and nicer to use..

[@abasschn830]

@@KeepOnTesting thank u very much sir. Keep testing 😁 Very good riview. Btw the cheap dmm with pcb very nice build quality is?

[@audiophileuser]

I noticed that the frequency function is missing but nevertheless everything is spot on!

[@danuber558]

You know i finally bought one yesterday. Is cheap is portable, very handy meter.

[@KeepOnTesting]

Awesome 👌 Enjoy your new UNI-T!

[@beaucheadle9598]

Would you be able to tell me if the current - com terminals remain continuous when the meter is turned off?

[@watchmakerful]

Does it recognize automatically when the test lead is inserted into the mA socket?

[@KeepOnTesting]

Yes it will override to current mode automatically 👍

[@dmitriy1944]

Inside looks much better than Bside ADM06. And good realization of current switch with 2 parts of connector. But still slow for everyday using. XXI century and they can't make fast full auto multimeter. Sad...

[@KeepOnTesting]

I guess it's a compromise...but still its a keeper 👍

[@shahrilhafizhakimin872]

Hey Darren, is there an option on UT123D to choose manual range instead of auto range? Let say I want to choose Mega Ohm instead of Kilo Ohm manually, can I do that?

[@KeepOnTesting]

Unfortunately not. There's no manual override with the 123D.

[@shahrilhafizhakimin872]

@@KeepOnTesting Thank you for taking your time to answer my comment. Between Kyoritsu 1021R vs UT123D, which one will you choose? You only can choose 1 😂 I want to buy between these 2 multimeter but I dont know which one I should buy. Can you give your suggestion?

[@KeepOnTesting]

@@shahrilhafizhakimin872 Hi Shahrii..well that is quite a difference...in this case I would go with the Kyoritsu without hesitation. 😀 It's a dmm I've been meaning to review for awhile..looks like a very good multimeter! 👍 and Kyoritsu is an excellent brand. The UNI-T 123D is an excellent CHEAP-O but in a different league!

[@user-tj8yb6cz6c]

You back with a Cheapo uni-t multimeter

[@KeepOnTesting]

Boo-yeah! 👍

[@shaunmorrissey7313]

What a nice little unit, very nice indeed.

[@KeepOnTesting]

Really a treat...would be a great road warrior.👍

[@target2256]

I HAVE A VERY IMPORTANT QUESTION: Can those who use this device answer, when you manually switch to diode, capacitor, ohm levels, does the CLICK CLICK SOUND come from the DEVICE, can you please answer?

[@KeepOnTesting]

You are probably referring to the relay that is triggering when you change modes. This is completely normal.

[@target2256]

@@KeepOnTesting No, I'm not talking about that, for example, when switching to capacitor mode, there is a relay sound, this is normal, but there is a continuous sound after switching on, clicking repeatedly, I'm talking about this sound.

[@KeepOnTesting]

@@target2256 ahhh well then you have a defective meter. There should be no clicking other than the relay. If you're interested, ship it to me and I'll replace it with a new Multimeter and make a video of the repair.

[@ABBAS12V]

Hy darren, which is better between ut123d and ht118a in terms of current accuracy and body construction. Keep on testing 😉

[@KeepOnTesting]

Hello ABBAS...Honestly they are identical in build quality.. both are rugged and good quality plastics and moulding.Accurscy is also very similar...Personally I'd buy both.. Big dual display on the HT118A is always nice but the EBTN display on the UNI-T is sweet too..hard call...but I would buy the HT118A if I had to choose only one.

[@ABBAS12V]

@@KeepOnTesting thank you for your answer. and sorry, I have 1 more comparison between ht118a and ut89x which is better where the accuracy is for the use of the automotive field and testing modifications of low-voltage electronic equipment. my current multimeter dt9205 is not accurate enough to measure currents below 1 amp, but it is very important to me. please answer. thank you 😊

[@KeepOnTesting]

@@ABBAS12V Both would do well but I'll give the edge to the UT89X in the lower current range.

[@ABBAS12V]

@@KeepOnTesting ok thanks a lot darren. and one more question, which of the two is faster to read fluctuating voltages and currents (example: measuring alternator voltage, led flasher, etc.)

[@KeepOnTesting]

@@ABBAS12V Probably the manual ranging UNI-T 👍

[@bhushan9066]

A Multimeter with High build quality and even in terms of display it is a high crispy contrasty brilliant one, all at a cheap price and that too from your trusted seller. Why wouldn't we won't be tempted to buy it?

[@KeepOnTesting]

It's almost as good as you'll get for a small portable multimeter that has an ebtn display with audible DIODE. Too bad they took away Temperature 🌡😪

[@coverstack6157]

Hi Darren, I just bought this multimeter yesterday after watching your reviews and it is really good. When switching this multimeter UT123D in RESISTANCE, CONTINUITY, DIODE and CAPACITANCE mode, there is low ticking sound every second make sure to put the multimeter back very close/touching to your ears, is this normal? When turning ON, you can hear the relay, but when switching to those modes, you can hear a low/faint sound every second. Have you encounter this? Thank you in advance, new friend here 🥰

[@KeepOnTesting]

Great question. I thought it was the relay kicking in but you seem to know what that already sounds like. Any chance you can email me a sound byte so I can hear it ? Email: [e-mail] and I'll report back.Btw, Welcome to the channel 😀 👍

[@coverstack6157]

Hi, thank you for noticing, I will send it to you immediately after recording, have a great day 😀@@KeepOnTesting

[@MartiniPerez]

I bought mine today and also noticed the same thing, sounds like a clock. I can also hear it in Scan mode.

[@KeepOnTesting]

Yes, clicking sound is normal. It's the relay. Congrats, great multimeter 👍

[@coverstack6157]

@@MartiniPerezHi there, mine does not tick in SCAN mode..only in RESISTANCE, CONTINUITY, DIODE and CAPACITANCE mode..The multimeter is working great, and the NCV feature is so helpful in my work 😉 maybe it was the RELAY as what Darren said..I just find it annoying when working at midnight troubleshooting motherboard 😄

[@rinqucosta2422]

Wow... What a cool smart one😍

[@KeepOnTesting]

Definitely!!👍

[@juancarlossandoval5628]

Wow,, uni T is now making smart dmm ,, Aneng?

[@KeepOnTesting]

Yes indeed.. UNI-T did a great job too.👍

[@KeepOnTesting]

ANENG 620A kzbin.info/www/bejne/l3XRo6iqq5d4mqM

[@TheRadiogeek]

A highly rated cheap o multimeter. Wow so so close to a five ⭐️. Nice work!

[@KeepOnTesting]

Yes..it was a nail biter..almost ! 🥳

[@3ankif109]

Subscribed🙌

[@KeepOnTesting]

Welcome! 😉👍

[@danishdart]

Not my taste in meter but on your recommendation, I bought a meter and leads from mrtools4test and they are a great seller.

[@KeepOnTesting]

Excellent news! He's definitely one of the best. I've used Jerry for over 5 years and he really is a reliable top notch seller.👍

[@derektodd4126]

Was watching this today and noticed I was not subscribed to your channel, not done by me.

[@KeepOnTesting]

Hi Derek...OK that explains why you've been giving me the silent treatment !! Just kidding.. OK.. I'll start to RSVP you just in case 😁👍

[@barrybogart5436]

Just bought one.Looking for small but full-featured. $35Cdn on AliE now. (And FREE shipping).

[@KeepOnTesting]

Great stuff ! Let us know how you like it 😀

[@devkashsingh4691]

Review any fluke multimeter

[@KeepOnTesting]

Coming soon!

[@rinqucosta2422]

when you spoke the words "kicks dalai lama's butt" I thought you are pro-chines man.. because China hates Dalai Lama😂 And that's why you mostly promote Chinese products..😆 But after again after careful observation of your speech I realized it was actually "Kicks dilemma's but" that means 'eliminate a difficult situation'.. By the way we love the changes of your dramatic versatile voice tones when you spoke these phrases- 'even-Steven' 'spot on' 'It's wavering.. It's wavering' 'call me a liar' 'not too shabby'....😍

[@KeepOnTesting]

Thanks Rinqu! I am completely neutral about manufacturing origin. I've seen bad products from all parts of the planet and great products as well..I'm only concerned about quality and functionality and bang for dollar. This latest UNI-T offering is definitely bang bang! 😉👍

[@Rudro2024]

😂

[@dmitriy1944]

Sometimes you moan like it's a porn shoot :)) Please do not be offended.

[@KeepOnTesting]

Oooooohhhh...mmmmmm...OK 🤪👍

[@bhushan9066]

That's the reason I use earphones while watching the videos from this channel 😂 but, still others : 👀 (coz I say I'm using earphones just to watch KZbin).

[@Rudro2024]

😉

[@adeldjahnit9621]

nice thankyou

[@KeepOnTesting]

👍

[@radius.indrawan]

Oh c'mon Darren, put it againts FLoooohohohohoho.. so the big boy lose some digits from this lil' newcomer.. ok, there's nothing to see here, keep on going... 🤣 the diode beep feature is awesome, but why the led indicator of continuity is taken away? it does not make any sense, Uni-T..

[@KeepOnTesting]

Sorry for the late reply.. 😅😬😪 Yes..losing the visual indicator for continuity was just blasphemous...utterly reprehensible...absolutely atrocious... UNI-T will hopefully bring it back with the next incarnation ....😀👍

[@radius.indrawan]

@@KeepOnTesting Hey, not a problem at all Darren. 😉 In my opinion, among lots of multimeter manufacturers, UNI-T is one of those who goes to the right direction. if this trend continues, soon they will be ready to compete with the big boys.

[@KeepOnTesting]

@@radius.indrawan I agree...vendors such as Mastech have seemingly lost their way..very little innovation and lackluster performance from what was once a great name in multimeters. UNI-T knows how to build a multimeter that not only looks great but performs even better! 😉👍

[@radius.indrawan]

@@KeepOnTesting yes, very unfortunate for Mastech.. they have built good (if not decent) meters..

[@jasonaltham7013]

If it aint safe for mains and isnt independantly tested for the CAT ratings, its a toy.

[@KeepOnTesting]

This CHEAP-O MULTIMETER is definitely not a toy.. CAT II Single-phase AC/Household mains not a problem.

[@zim2493]

nice

[@KeepOnTesting]

👍

[@Rudro2024]

Better upgrade Uni-T

[@danuber558]

wavetek is not junky ha ha

[@KeepOnTesting]

I never said it was..I actually own just about every Wavetek multimeter built.. 😀👍

[@Youtube_deleted_my_favourites]

3 week delivery from China. Fk dat

[@garywutube]

UNI-T original probe is rubbish!!

[@KeepOnTesting]

I hear ya..sometimes UNI-T throws in a decent set of test leads..but not always.