Uniden Bearcat 980SSB install of a 10 meter expansion board.

[@TRXLab]

That was a lot of work done by Mark to reverse engineer the board and create a new one. really excellent outcome love it

[@MrCaveman8]

Many many thanks Mike, you're so awesome !!!

[@w.rustylane5650]

I think that the older radios like J.C. Penney's and Sears 40 channel phase locked loop radios were a lot easier to modify. All you had to do on those is cut a trace on the circuit board and resupply a voltage to the clarifier to unlock it so that the transmitter would follow the clarifier in frequency. You also had to install a couple of SPST-center off switches to control the frequencies. When I moved to Tennessee from the Atlanta area I sold all my old CB equipment including my old Fluke freq counter. Wish I had it all back. I did find a modified J.C.Penney's radio in my storage shed the other day along with a D-104 power mic. Now if only I could find an antenna I'd think about putting up another base station. I used to modify radios back in the mid 70's and 80's as I had a lot of schematics back then to work on radios. Most of them were pretty easily modified. I suppose if I could find enough coax I could climb a tree and put up a folded dipole but I don't climb trees any more since I'm now 69.

[@Captain1717Q]

We are waiting for your return Mike!!!!

[@mechadrake]

nice mod install. and cool on president repairs. I got myself used Jacson II and it just needed bub replaced in the scale. I do not have base antenna, with magnetic car antenna on the roof of the house I sometimes hear people over 1k km away. locals are quite dead here not around cities on trucks.

[@ke4asc]

That said, as a licensed Amateur radio operator, my question is what's the radio cost? And what's that mod cost?

[@raulmontesdeoca7843]

Also, what’s the price for the ten meter conversion? I have my license. KB2 DCV

[@bundylovess]

Congrats on the repair authority to do warranty work mike big thumbs up

[@robertschlotterbeck4314]

What is the total price to do the conversion?

[@junglejoecvideogates9705]

Is it easy to get extra frequencies for 11 meter band as well. We have a Bearcat 980 newer one

[@francismcclaughry3794]

I would just like to know where he is at. I live in Ill. and I wonder where I would have to ship the radio if I wanted work done. alsp you sound like a guy I used to know. His name was tom, Torrez. He was a good friend.

[@spresc2180]

There is a 980 youtube vid showing a needle nose plier crushing the beep resistor. Extreme hack technique.

[@Drifter215]

HEY MIKE where can i get one of them new display board im intrigued

[@125southernnh2]

I like mine stock. I'm guessing they don't want anyone to mod them.

[@pixotica]

Mike , you make the best cb vids out there. Really appreciate your skills and explanations. Would love a video on getting rid of the beep, I know there are some vids regarding this, but your the one we all trust. I have a first rev 980, like the radio but that beep with head phones is painful. I enjoy using headphones, and that beep does not get controlled viz the volume knob, it is full blast to the ears in the painful range. I have a question on the 980 transmit meter, on ssb it shows a swing, but on am it shows almost zero. Not that it matters, but it seems odd. Maybe something I just don't understand. I like this radio. My only beef is the beep , and the rear speaker jack. I think all cb radios should have a front headphone jack. To me the joy of radio is getting the phones on and trying to hear those far out stations.

[@twrrykrug7884]

great work mike do you still work on radios and if so i have a 148gtl dynascan i’d like to have a frequency counter installed on

[@vencentbauer]

My new 980 the recive.. is great but my output is terrible my swrs are great powe great right from battery. And I do fail my output test anything I can adjust. Or throw a 2 pill behind it. ????

[@Alfa011]

I am an enthusiast of SSB 11 meter radios and have a collection of Cobras, RCI's, Uniden's from the 1990's and 2000's all working fine. Was thinking on getting a modern radio and was wondering how good is this radio compared with the Galaxy's, Connex's, President's etc etc... I just like the looks of it.

[@robbierussell9536]

Mike would you rather own a Stryker or a Uniden 980?? Which is a better radio..I run a Rm italy 703 - 500 linear!!!

[@alfilreyalfilrey]

Hi Mike, I need your help, I have a ssb980 second generation, my problem is that the screen starts losing digits with increasing heat; In the mornings, I turn on the station and it is perfect, but as the temperature increases, numbers and letters begin to disappear completely or partially. I need to know where to send it for you to review and, if possible, repair it. Beforehand thank you very much.

[@josedejesus3117]

Yeah me too I need a new display board , same problem here

[@ewkabel]

Where can you get these boards?

[@robertfrank676]

How do i go about ordering a Stryker 955 or a 497??

[@crazy55rider7]

Hello I have that radio. And the mic will work and not work plus the LED display fades out when in warm weather even at the first turning on of radio. Yes it is setting in the truck out of direct sun light and it's not warm to the touch at all

[@benrandomly2016]

Is there a way to look at the box and tell if it's an old version. I've been looking at one and getting one of Marks boards installed but I don't know how to get one.

[@mikesradiorepair]

Have never had one here still in the box so I don't know if there is. There is when looking at the back of the radio. The old ones had a screw in the back near the antenna connector, in the new version it's a empty hole (no screw). The new versions did not need a bracket on the inside because they do not have a separate SWR board, it's been incorporated onto the main PCB.

[@benrandomly2016]

MikesRadioRepair Thanks. I'll look out for that and try to get an older style.

[@Deansadv]

Why won’t Uniden just come out with a 10 meter radio I love the design features and looks of these especially the new one with bear tracker and scanner but just make a 10meter

[@frankdevillian4150]

Kind of need to not forget the Uniden 2830 , HR2500 , HR2510 and the HR2600 and of course the original Lincoln seeing as standard is 10m only 28.000 - 29.699 MHz and have to be modified in order to be used on the CB band then also since Uniden made the radios for RatShack the HTX-10 and HTX-100 ( no 11m strait 10m only ) and for full HF the ol boat anchor Uniden 2020 (i have one). I would take any of the the above named tried and true awesome 10 meter export radios over the new crap made by Anytone re-branded as Uniden/President like the $100 980... Well you get what you pay for and when the radio is $250-350 vs $100 sold at Walmart vs eBay or a local shop or someone off the air.

[@matthewlee2686]

Just buy a icom 706

[@DocFirewire]

You can buy a "President Grant II Premium" in the EU which looks almost identical besides the chrome. It has 25-30MHz (Jumper inside), AM, FM and SSB. However, I think that the President Lincoln II+ outperforms both of these radios in every aspect. I owned the Grant II Premium myself and compared to the Lincoln it lacks quite alot.

[@kenyel321]

I have a uniden 885 bear tracker that is flaking out on me that I purchased last year. It is also hook up to a 3 pill. Before I get this one fix can we talk? I would love to put 980 on my three pill with the upgrade and mods. Please if you can get in touch with me.

[@francismcclaughry3794]

a channel king board . is that the whole board. I watached another radio and he said he was having all kinds of trouble

[@samgrimm5865]

Can you do this modification to the 885 radio?

[@edwardakin7243]

How much does it cost for the frequency m9d

[@daveblaedow8419]

Am I able to get work done by you??

[@nightlife7231]

I have a new gen can uper and lowers be added I have the 980 ssb and have side band but want uper n lowers of 1 thur 40

[@dieseldood]

I know this is an older Video, but a google search didn't get me anywhere. Where can this mod or the Channel king mod be purchased?

[@andresantos_net9301]

Hi Mike, how are you? Friend Mike is it possible to "STRETCH" this device to 80 channels? Do you do this job?

[@k9regan]

How much would you charge to put a 10 meter expansion board in my 980ssl? Or is this something you sell that i can do myself ?

[@mikesradiorepair]

Shoot me a email. Just add @gmail.com to my youtube user ID.

[@blueuscg]

Hello, I have a question you might or might not can answer. So what I would like to do is remove the face of my Bearcat 880 and relocate it. Just due to limited to no space in the cab, I have checked with every company that makes flat/ribbon cables no one can get me a longer on that connects the face board to the main PCB. Is it doabl to change out the connector on boath boards? James Blue

[@aaronbrandon9459]

How do I contact you to get this done?

[@ronaldcoyle4942]

what would you charge me for a modified Uniden Bearcat 980? and ship to Albq NM?

[@angellovejoy9721]

Afternoon I have a New 980 how much and where do I send it?

[@gsadventure8785]

Hey hi there. How do I contact you.

[@phillipwhidby]

How do you get in contact with hell?

[@drsysop]

Does this board work with the latest version of 980? Where are these boards available from?

[@tomw5vlt119]

What does it mean to "unlock the clarifier"? This isn't the first video that this has been mentioned but not explained... Thanks!

[@dakotamar45acp]

it allows the clarifier to transmit on the same frequency it is receiving. a locked clarifier will not change the tx freq as you move it to receive stations that are not centered on the frequency you are on.

[@w.rustylane5650]

By unlocking the clarifier the transmitter transmits at the same frequency as the clarifier. This mod is usually done by providing a different voltage to the clarifier pot. It is useful when talking to people between the frequencies or to those who are off frequency or the normal frequencies.

[@comeasyouare4545]

Is it because I live on the opposite earth the radio is upside down daring the entire video? Got a crick in my neck tiring to see the display.

[@Utahscg]

how do I send in a radio to have you do work to it.

[@hamtrucker]

As a Ham why would you mod a CB to transmit in the low end of 10 meter where CW and data ops are used

[@gregorygeorge4786]

Do you have a video of how to open the clarifier on the uniden 980 ssb, this one does not show the details how.

[@raulmontesdeoca7843]

Where can I get an encoder for my 980 SSB? Mine broke at the shaft. Uniden won’t sell me one.

[@cw5059]

Congrats on the President endorsement Mike.

[@danielkinsman1964]

Can you do a 10 meter mod to my Uniden 980 SSB.

[@leandroogavadepaulasouza5012]

Howdy sr. Is there a way to be in contact with you? I have one of those uniden bearcat

[@KINGOFTHEPOPES]

I purchased the same model recently. Shows promise but its a bear to fit in my 2004 chevy s10 without cutting and drilling. Is it possible from what youve seen to convert the front panel into a head unit?

[@mikesradiorepair]

KINGOFTHEPOPES Is it possible, sure anything is possible. Is it practicle or financially feasible, probably not.

[@McClellan71]

Are you doing any work on the Bear tracker radio/scanner?

[@mikesradiorepair]

If you mean the 885 I have not had one to look at yet and as far as I know there is no service manual that has been released for it. Is repairing a radio like this possible without a service manual, yes. Is it economically practical, no. That's why I always tell people don't buy radios that there is no published service manual.

[@Martin-hq1if]

Hi, is it possible to activate FM modulation in 980?

[@mikesradiorepair]

No.

[@keystonecountryboy]

how much would this cost to have done?

[@cyberwolf83]

where they sell this card

[@cheesecracker3977]

Very nice! Is this just for show or do you install theses for customers. I really like my 980, makes a good radio for traveling with ssb,am and weather band. With the added channels I wouldn't need anything else in my pickup. Other then a little heat.

[@cheesecracker3977]

MikesRadioRepair thanks for the quick reply. I have had my 980 for about 4 years now, so I believe it's an original. I'll need to get with you

[@charlesgoede2809]

can I fit one of these into a dashboard 'din' slot? how much to do the ch. brd? thanks, Chuck KC6CHT

[@rondonato7443]

silly question, i have a 980 with a bad display board. uniden wants $60. for repair, but i was wondering if you have one i could buy from you, hopefully for less than $60.!

[@mikesradiorepair]

I get them by buying broken parts chassis.

[@rondonato7443]

MikesRadioRepair do you have any for sale?

[@mikesradiorepair]

No

[@The_huge_pen]

Where did you get that new display board? I cracked the screen on mine, need a replacement board.

[@mikesradiorepair]

+misener The display itself is removed from the original front microprocessor board and transferred to the new microprocessor board.

[@The_huge_pen]

MikesRadioRepair so I'm pretty much screwed? Cb came out of Cb pocket and hit the shifter cracked the screen

[@mikesradiorepair]

misener Other than getting a parts radio to extract one from, yep. Uniden service support is non existent. Email them and the reply is defining silence. Unlike President that has excellent support including stocking parts at the US headquarters in Florida. All I do with them is email or call, order the parts and there here in 2 or 3 days. They are about the only company left with good after the sale support and service.

[@The_huge_pen]

Thanks!

[@cristiancenizo]

I been reading everywhere about the beep... if you hold the 9/19 button it disables it ... i cant recall at top of my head if that button or the one next to it

[@FREEDOM-sd9my]

Are you still installing the boards? If you are please contact me.

[@lindsaykirk5830]

Hi Mike . I want to convert one of these 980ssb 27mHz to 26mHz for use in New Zealand. Can you help with this?

[@asherdie]

Yeti com

[@drewpeavley713]

how much is install of a 10 meter expansion board for a uniden 980 thank you

[@EnochianBorg]

where can we get the board?

[@Andyboymx_]

Hola tengo un equipo igual ¿cómo puedo realizar esta modificación? Gracias!

[@roberttinsley551]

Mike I am so interested in one machine that you had in that shop and that's that one that you are using in this video I'm in love with that machine I may not be able to afford it can you please tell me what it is model number and all I would greatly appreciate that

[@ronalddaub9740]

I need a new display board because it doesn't display much anymore

[@陳亨利-q2y]

How can I get this board?

[@edmundschwab3463]

Who's Mark

[@chazz2009]

Hold anl/nb button down for three seconds. This gets rid of the beep.

[@mikesradiorepair]

On the new version radios it does. There was no "off switch" on the first version.

[@saintpat762]

Can I send mine to you for the 10 meter mod?

[@charlesgoede2809]

do you work on Alnico Dx-70's ? thanks, Chuck KC6CHT

[@M70ACARRY]

Clairmont Skyland Radio & TV Services 825 Oak Street Gainesville, Georgia 30501 Voice: [phone] Fax: [phone] [e-mail]

[@a2phil]

@@M70ACARRY Are they still in business? I need the vfo encoder repaired/replaced on my DX 70TH...

[@FREEDOM-sd9my]

how can I contact you ?

[@russianstarwelder]

Mike get ahold of me as I’d like to do this conversion on my radio and I have no idea on how else to contact other than through here

[@chickenhawknwc]

Mark did a great job on that board, I can appreciate all the work that went into it. I have question for you Mike where can I send my Leader FC LDC822 to get recalibrated?

[@mikesradiorepair]

+Hawk N.W.C. I use a local calibration laboratory that's only a few miles away. You might check and see if there is a cal lab near you.

[@JackSoffalot]

How can the board be purchased? I just picked up a 980. Thanks!

[@jeffreyweatherwax6815]

i want a link to the bored if there is one

[@jimthehermit8113]

how legal is it to transmit on these other frequencies?

[@mikesradiorepair]

Jim the Hermit It isn't unless you have a licence for them.

[@FREEDOM-sd9my]

Are you saying with that board ,we can talk the freeband channels? If so I'm interested

[@mikesradiorepair]

+FREEDOM 2 Yes, it is a channel expansion board that also adds memory channels, scanning, expands the receive range of the WX FM receiver and roger beeps.

[@robertschlotterbeck4314]

MikesRadioRepair what is the cost of the board and installation?

[@diogocorvasdepuga755]

where I can buy one?

[@terencegillespie6675]

I thought this was going to be about a 10 meter expansion board being installed. All I found was major general Yak.

[@aaronson2540]

That's Nice been waiting for a mod for that radio.. Did you say Mike it won't work on newer versions 980 i think i have newer version...

[@Filipcarmin]

Tell me President Andy or Bill? Thanks

[@Dont_stay_long_k077]

I'd really not be impressed with that loose particle. Great mod these are selling so well

[@Radionut]

Can anyone tell me where to find this guy online. I have looked and looked but come up empty

[@mikesradiorepair]

+Radionut R I get swamped daily with emails. If you sent one and I didn't reply I apologize. If not, shoot me a message. Just add @gmail.com to my youtube user ID.

[@Radionut]

MikesRadioRepair thank you Sir email sent

[@robertschlotterbeck4314]

My email is [e-mail] I can't seem to find you or your contact anyplace. I'm looking for the 980 conversion board, if you don't have time to do an install please let me know where to get the board and I will do the install. Thanks man!

[@nathanielcrowder1978]

Mr Mike I sent you an email about repairing my 980 ssb thanks.

[@dejo1976]

I got a 980 I like to get a expansion board

[@Drifter215]

hey mike do u still do these installs of the channel upgrades

[@TheRadioShop]

Why do folks do that to components lol. looks like I will be busy watching videos off and on today. I have three I need to edit and upload. Thanks for sharing Mike

[@Andyboymx_]

Hi, how can I modify my equipment? or do I need to buy something additional? thank you very much

[@section8outdoors]

I sent you a email but got no response!

[@francismcclaughry3794]

would knot know it was you when you talk on the radio

[@GroundControl204]

10 meter conversion for this is just pointless.

[@adhibhirawa]

do you have email address? i think i would like to modified my 980 on freq expansion

[@goradios21154]

very nice

[@DutchSchultz777]

Do y'all do direct injection on RCI radios, I'd like to have my 2995dx DI?

[@VOLKZZORN]

nice part I've been looking for something like that for ages in Germany but our stupid laws regarding customs taxes etc. is not normal, as a gift and still paid for is currently the only option without an invoice and just a ticket from the flea market as a gift. sad you would buy more from USA but it is resentful for a car that cost 950$ police car in auction until it was here we are at 4500€ 😔 our government pocket the difference 🤬

[@si12volt1]

be nice if you could answer questions asked

[@JDtheEE]

Rude!

[@utubeCENSORSaregai]

Mike quit hes gone Way to think

[@wireworks616]

So you converted a legal radio to an illegal radio. Don't need a license to transmit on cb, but you need a license for the 10 meter band.

[@TheLionAndTheLamb777]

That would be up to the user to use it legally.

[@k2dlt]

This is why the fcc is in business so people who float into 10 meter band and operate illegally get cost and pay hefty fines. Don't modify your cb to operate in the 10 meter band unless you are a licensed amateur! Too easy now day to get a ham license muilti guess and you get your ticket no morse or anything to restrict you.... you have a 25 percent chance of getting questions right even if you don't study theory.

[@hazmathauler4536]

You’re such a nerd!! Probably a sad Ham 🙄🤦‍♂️. Living in Mommy’s basement at 50 years old, picking the lint out of your belly button then smelling your finger!

[@w.maximilliandejohnsonbour725]

Hmm...!!!!!.

[@kc8653]

Why waste all that money on expanding that baby radio. Just buy a good 10 meter radio have it tuned and aligned and be done.

[@cmj20002]

That is what I say. I have a Stryker 955 HP that has so much more functionality than a 980 also got an old Galaxy DX93T great radio. Why convert a CB to a black box radio when you can buy one with it all in it. No need to add channels.

[@faou666]

RIGHT ON ! Great advice !!!

[@kc8653]

If you dont have a FCC license you cant use the 10 meter frequencies. So what's the point. And if you do have a license you wouldnt waste time on this. Either buy a hf rig or a legit 10 meter radio.

[@kd5dnk]

i Wouldnt say that i enjoy my cb mobil and the capability of having 10m in one unit Kd5dnk amature extra class!

[@w.rustylane5650]

If you are a CB radio operator and run a freq counter to stay just below the 10 meter band then all's well. You might just want to get above or below the channel 1 through 40 bullshit.

[@ke4asc]

An amateur radio license is REQUIRED for Ten meters, and once modified it's no longer legally useable on the 11 meter Citizen's Band.

[@eazystreet5507]

Why are there negatives on this, did they run out of tinfoil for their hat hobby.