Universal Audio Apollo Gen 2 is Here! - Can It Get Better?!

[@envisagefilmshouston]

Is insane how you can sell the same shit over and over and over and over again.

[@Rgdonaire_07]

comment of the decade!

[@808_fuck]

Apple? 🍏

[@envisagefilmshouston]

@@Rgdonaire_07 😔😔😔😔

[@baghead5398]

But that last gen is discounted now so honestly i could care less

[@envisagefilmshouston]

@@baghead5398 WRONG

[@knarrs]

So basically this is just the same hardware, just better converters, but ONLY on the outputs?? I hope you sell gen1 in a discount, so we can get the same thing cheaper

[@assareth.]

that shi rn it’s 750! it’s a steallll (for the apollo twin ofc)

[@smithjabi]

Also keeping in mind the monthly subscription for sound ID

[@blablalablala]

Here is a difference comparison of the Universal Audio Apollo x8 Gen 1 and Gen 2 specifications from chatgpt 1. Monitor Output Dynamic Range Gen 1: 129 dB (A-weighted) Gen 2: 130 dB (A-weighted) The Gen 2 model slightly improves the dynamic range of the monitor outputs, resulting in potentially better sound accuracy in critical listening scenarios. 2. Line Output Dynamic Range Gen 1: 127 dB (A-weighted) Gen 2: 127 dB (A-weighted) No change between the two models for line output dynamic range, maintaining the same level of high audio performance. 3. Total Harmonic Distortion + Noise (THD+N) on Monitor Outputs Gen 1: -118 dB (0.00012%) Gen 2: -127 dB (0.000045%) There’s a significant improvement in THD+N for Gen 2, meaning that distortion is reduced, leading to a cleaner and more transparent sound. 4. Headphone Output Performance Gen 1: Dynamic Range: 125 dB (A-weighted) THD+N: -102 dB (0.00080%) Maximum Output Power: 150 mW RMS (into 300-ohm load) Gen 2: Dynamic Range: 126 dB (A-weighted) THD+N: -117 dB (0.00014%) @ 300 ohm load, -118 dB (0.00013%) @ 600 ohm load Maximum Output Power: 120 mW RMS (into 300-ohm load), 67 mW RMS (into 600-ohm load) Gen 2 shows a significant improvement in distortion (THD+N), providing a much cleaner headphone signal compared to Gen 1. However, Gen 1 has higher maximum output power at 150 mW versus 120 mW for Gen 2 (at 300-ohm load), meaning Gen 1 may drive certain high-impedance headphones slightly louder.

[@ifelovemusic]

Thanks for this. Saved me at least a good hour of research. So irritated by this lmao! I have an x16 gen 1 but have a dangerous ad+ for AD. I analog sum and use the line outs….all 16, that have no improvement. So yeah, completely useless for my use case

[@derekchapman5167]

... and these are the numbers that matter, the other puffery, like auto-gain is a complete red herring; the presenters reaction, when they're talking about auto-gain, should be enough to any intelligent person to tell them he has absolutely no idea what's important in a professional audio interface. Either that, or he's playing up to the camera.

[@Doctaj54]

@@ifelovemusic thanks! From a post on the UAD forum "very little" has changed on the x16 gen 2 vs gen 1 and the other units were brought up to the sound quality in the x16 units. So you should be good. I had an original Twin and upgraded to the X8p and Twin X when my Avid HD Omni started acting up. I knew that the Twin X was suppose to have a minor sound difference vs the rack units but I never knew the x16 was the best of them all. BTW I never noticed any sound differences in my units. The Sonarworks feature will cost you $80 to add if you already own the software. I can run Sonarworks inside my Adam monitors so I don't need that extra feature. It always let you load/run different speaker or headphone profiles but you had to manually switch between them inside the software. I wonder if the new feature will allow you to load/run Sonarworks on the headphone out and the monitor out at the very same time instead of having to manually switch between the 2 each time. That might be cool.

[@djcode6983]

All boards have been updated including the converters. Thats what matters.

[@theprisonier]

Is that the most BORING new gen of something I ever seen…. . ?

[@alainjulot3490]

Another question, Why UAD does not have a program to bring your old unit to upgrade to newest unit?

[@brymills]

Because there’s new hardware, not just software?

[@Harrysound]

Who wants your old Apollo

[@alainjulot3490]

@@Harrysound I have Apollo x6, I think you want it. 😀

[@henrikpetersson3463]

@@brymills Granted, there are changes in the hardware. But there is no reason why previous gen Apollos couldn't have the auto gain feature for example. The preamps are already digitally controlled.

[@djcode6983]

The hardware has been updated on all of the boards. Just with the same amount of DSP

[@UncleT525]

It looks like an modern version of the 1st Gen apollos with slightly improved Converters and a bunch of gimmicks like auto gain and sonar works. At This point I don’t see why you need upgrade over the OG X series which I already it have. It already sounds great and millions of records have been made on the previous gens. We reached studio grade converters that’s capable of recording industry standard years ago. It’s starting to feel like Apple Cash grabs at this point

[@RealJohnnyHash]

Hey man, stop whining - Make music* * = for the whiny boys that whine about the gear instead of making music with it.

[@wetkenny]

​@@RealJohnnyHash you've gotta be a UA shill account. You've replied to both top comments "stop whining", when they say what we all clearly see. Nothing of any significance is added to gen 2.

[@RealJohnnyHash]

@@wetkenny No one is even listening to your music. Most of the people that have something to say before they even own the gear aren't even selling records or doing shows. I use to sell Pro Audio to people that don't do anything with the gear but have crazy opinions. Yes, I've received NFRs from Universal Audio and yes I know the gear better than you.

[@wetkenny]

@@RealJohnnyHash lol, hit a nerve did I? You felt like you had to go to my youtube page and try to find argument ammo? You literally have no idea if anyone is listening to my music. I don't chirp online trolls from my bands account. You have no idea what my experience with this gear is. I don't know what yours is. The difference between is that you're clearly too simple to see that. Also the online stalking. That's weird bro. Don't do that.

[@RealJohnnyHash]

@@wetkenny I've seen your music. I understand now.

[@xlilxillx]

nice upgrade but i can't believe they're using the same dsp chipset that's kind of insane. those sharc chips are ancient!!!

[@loweroctaves]

What upgrade? They literally recycled the same units they have been selling

[@xlilxillx]

@@loweroctaves yeah lol they added some useful features tho

[@vincentklein4455]

@@xlilxillxwhich ones? Auto gain? The majority of this video has been spent discussing console updates which admittedly are the better part of this update but they are literally available on gen 1 as well… And sorry but new D/A converters are a joke, I mean sure less noise in your monitors I guess but was that really a problem?

[@djcode6983]

All of the hardware has been updated. No idea what’s happening in this video. The desktop units especially got a big bump in conversion quality. The hardware is not the same

[@djcode6983]

Sharc chips don’t yet have a reasonable replacement both in cost and function. Remember the UA library has 200 plugins that have to move to whatever the next thing will be too. Not to mention other companies like Neural etc are also still using Sharc for the same reason

[@BerkinJr]

I knew this upgrade brought nothing exciting significant after watching Mitch Callagher from Sweetwater Sound reviewed it for a mere 4 minutes 😂

[@alainjulot3490]

Now tell me about the converter vs Apogee Symphony MKII or Avid Carbon Hybrid?

[@chizzulwinduh1941]

And RME and even Audient

[@raphabmroque]

@@chizzulwinduh1941 Audient FTW

[@jacksp8de]

Well it's the same A/D Conversion so we already know what that sound like.

[@DruDilly]

That’s what I want to know

[@eranddroory9987]

The Tesla in the world of audio interfaces. Unfortunately it's got a WV buggy engine under the hood. Imagine your computer sales person selling you a laptop with touch screen and all the bells and whistles, but with single core cpus from 2007.. The shark processors they call "cores" are single core running a "whopping" 400 MHz a piece...

[@mariodario9033]

I love when sales manager have to stand on his head to refer how big V2 is change…when (almost) nothing was changed and that is just marketing action and porfolio ads refresh. We have more of that more of this…The major change is….autogain that is no needed when someone buy’s a sound card for $2000…he is PRO and know how to set up gain properly ;)))))

[@RealJohnnyHash]

I love how people who don't even have the gear have all the answers. Stop whining.

[@LipazMusic]

@@RealJohnnyHash pointless whining is not good indeed, but if it has somewhat real content… Johnny, check out my comment as a long-term user of an Apollo X6. Facts are facts. Data is on paper (user manuals are publicly available for comparison) and what has not been mentioned in the promos, it is in my comment. Apollo is good, but corporates are corporates. I do not like attach feelings to products or corporates, because that’s where marketing kicks in and your money goes out.

[@derekchapman5167]

@@RealJohnnyHash I don't have a 1982 SSL, but I do know how to use one and what it sounds like; what's your point????

[@derekchapman5167]

Ignore the cretins that question the validity of your post; sonically, almost nothing has changed on the V2, and more importantly, almost every review is lauding features that even someone at the beginning of their journey should know, i.e. gain structure, and particularly someone that's buying an X8 or X8P at £3k+++.

[@henrikpetersson3463]

Auto gain is a blessing for the self recording artists. I've been on UA about this for 10+ years. But why this feature has been limited to the gen 2 only is just odd. I see no reason why the previous generation couldn't have auto gain.

[@YaroslavMalykhin]

When will there be a usb c version ?

[@brianeno1639]

Have the incompatability issues between uad apollo thunderbolt and pc/windows been fixed? If not, there's no point pc/windows users considering Gen 2.

[@Allious131]

Exactly they never listened to windows users at all these people are just a terrible company

[@mcnitt]

Nice that SonarWorks support is coming to Gen 1. 🎉

[@aarondoerr2260]

Wish they had put Dante every Apollo with ability to handle more than 16 Dante I/O. Would love to take advantage of Unison inputs straight into a Dante environment.

[@gurtana]

Is autogain only available if you have these new units? Or can users with the previous gen have that feature as a software upgrade?

[@luciustodd1317]

I use to have an Apollo Twin MKii. After seven years I went over to the Apogee stuff, man… never looked back . I have the Duet 3 and the Apogee desktop Symphony . The specs on these new Apollo interfaces for as the converters the apogee Duet 3 and Desktop Symphony has had it for 4 years now. It took 6 years for UAD to catch up 😂 if you don’t believe me do the research yourself.

[@Fastvoice]

UAD only upgraded the D/A converters, not the A/D side.

[@weszme]

Same old sharc chips, so why would I upgrade from gen 1 again?

[@henrikpetersson3463]

There's no reason to upgrade really. This is more of a refresh than a generational shift.

[@andreievkalupniek5717]

So expensive and no networking (AVB or Dante) only ADAT. Why Digital mixers intended for live sound are leaps ahead of audio interfaces?

[@AnasAlsayedStudio]

Auto gain, sonarworks both are marketed as ( the big new features ) BUT BUT BUT it is a software thing not a hardware feature I mean autogain is not retrospective, it is not a protective layer against distortion it just listen and then give you a " RECOMMENDED " gain settings sonarwork is already known software for monitors frequency response curve correction so what is the new? slightly improved converters?

[@vincentklein4455]

On the outputs no less… Seriously this is a joke

[@hunterfrederick2731]

I want to do live auto tune during a shows with no latency. can live handle that now? is this needed? Is there another interface that can do that onboard that is worth considering?

[@jemwax]

Do they come with exactly the same plugins

[@onepath5978]

Its hard to update Gen 1 when its already ahead of its time, they can only tweak it, but if you really care about getting the best out of your music the small difference is worth the upgrade,

[@chizzulwinduh1941]

Hang on, Auto Gain has been around with RME, Audient and others have had this as standard for ages. Room correction by Sonarworks integration is already on RME TotalMix FX. Unison has been part of UAD for years, why are we talking about this like it's a new thing? The one thing I would've expected is a massive update in DSP power. But, NO, where's the modern day processors? If you haven't upgraded the Processing power/ CPU's, why are you even bothering? Before you buy this, get a demo and a good idea of the amount of UAD plugins you can use at any one time. It's a lot less than you'd minimum expect. UAD are a bunch of dodgy snake oil salesmen. But they're brilliant Snake Oil salesmen. Nothing worth it here. UAD is so behind, their old plugins keep getting rehashed and given a new face and marketing and the one thing the market has been waiting for in their Apollo range is glaringly missing.

[@tothesoil7297]

So the room correction feature will be available for gen 1 as well?

[@garyjostone]

Yes.

[@tothesoil7297]

@@garyjostone yeah…definitely not worth the upgrade for me😂 thanks for the response

[@ColinEdwards-i9x]

Improved the converters on the way out?! I was hoping for a game changer... like a new ADSP. The way I see it in a nutshell is nothing has changed but with the x16D... So why not offer Dante on all gen 2 devices? give us a reason to buy a new interface.

[@jonhamilton48]

You don’t need auto gain, if you know how to use a preamp and compressor. Is this really UA now ? Did Bill Jr leave UA or something? Also you improved the DA without improving the AD ? That’s pointless, for recording sources. Good luck , seems like a money grab while other interfaces have improved across the board.

[@djcode6983]

Both A/D and D/A have been updated on these boards. No idea why that wasn’t made clear here

[@jonhamilton48]

@@djcode6983 Great news ! Yeah that's strange the REP for UA missed it, he only mentions DA. Back on my list now then ;)

[@henrikpetersson3463]

There are so many times that I’ve wished for auto-gain when recording myself. I’ve suggested it to UA numerous times over the past 10+ years. Seems they finally got the message when enough competitors started doing it.

[@jamalbee596]

@@henrikpetersson3463is auto gain a form of auto gain staging?

[@yxno1]

So I believe for my fellow Windows Users is there any improvement on the drivers side on this or is it really just a cash grab? Cos better converters do not justify the price when all they changed is the colour and made the buttons look like Windows 11.

[@yxno1]

Also addition Thunderbolt 5 is officially out and they didnt even include Thunderbolt 4. Most Intel motherboards that have TB support TB4 so why only TB3 if its a refresh??? Missed opportunities.

[@baal7793]

RME everyday. Dude, Autogain ? Wow 😂

[@loweroctaves]

Whats wrong with UA??? Do you think we’re stupid??? Disappointing release. Thanks for no extra inputs as well. Also how do the last version units look nicer as well???? Baffling

[@Vocalisto]

look at his face at 3:54 He's like really digga? What a revolutionize new feature...

[@JayTheLane]

He's a talking head who doesn't even believe this is much better.

[@hertimk6868]

🤣

[@fattohead]

will it run Sonarworrks with zero latency like all other UAD DSP plug-ins?

[@wouttemmerman]

@universalaudio #universalaudio do you have a separate EQ for the ALT monitoring?

[@BenLawton-88]

Did they mention any difference in DSP?

[@JayTheLane]

No they didn't because there is no change, they are still using Sharc chips for DSP which is really old tech. They are just cash grabbing on a slight refresh for old tech. For this to be worth it they'd need to implement new dao tech.

[@BenLawton-88]

Actually? Like are there tech specs listed anywhere? If they’re using the same type and amount of DSP that’s crazy.

[@noto1521]

Sonarworks realtime dsp correction?

[@kevinstarofficial]

they increased the price by a lot just for switching the interface color back to the old ones. nothing new. so disapointing. way better options at that ridiculous price

[@Doctaj54]

No, the price increased due to the added plugin bundles. Most UAD owners already own those plugins though.

[@kevinstarofficial]

The Heritage edition was cheaper and had pretty much the same plugins.

[@sonexcellencea]

No clear converter upgrade

[@djcode6983]

A/D and D/A has been improved on these units. No idea why they didn’t make that clear

[@thaexception3406]

That two different profiles for headphones is nice and unique I think.

[@henrikpetersson3463]

Part of me is relived by this update since I recently bought an X4. But it is surprising how little changes they made and still want to call it a new generation. It's just a refresh really. I do like that they went back to silver though! There has been so many missed opportunities over the years with the Apollo line-up. It started out really great but somehow they dropped the ball on being on the leading edge of audio interfaces. I've given them so many good suggestions on how they could develop it further but they just don't care. I was on them about auto-gain 10+ years ago when it wasn't available anywhere, now they finally added it years after the competition. And they have more or less ignored the live audio scene the whole time. It's disappointing to see such a promising company just waste their valuable resources.

[@MrAusmo]

Not a peep in the video about Windows compatibility. I had to dig deep into the new manuals to find that info and its pretty basic. Unlike the original product pages, they have carefully avoided bringing up any OS compatibility on the new UA Gen 2 product pages I just looked at. There are ongoing, unresolved issues with the drivers for Windows users that use the original Apollo TB3 products. Now we have an entire new generation of Apollo products while the first ones still do not work properly. UA clearly demonstrated it has a poor commitment level to fixing this problem. I have spent countless hours following UAs suggestions and jumping through endless hoops (doing all the work) to get rid of the pops and clicks only to have UA do an new update and break it all over again. I have nothing left to configure. They keep dangling the driver fix carrot that they are supposedly working on (For the last 5 years). This has been like Lucy with the football in Charlie Brown. So I ask one simple question: Is it truly (and unconditionally) Windows compatible?

[@lovelydonkey]

Do you love the endless demos they force on you when you install the control panel?

[@jeremy_woods]

Yeah i bought a prism titan. Been out almost 10 years and still sounds better all across the board than any of them.

[@xlilxillx]

can you auto-gain multiple pre-amps at the same time? that would be much more useful

[@naldi190]

Yes

[@YeesSivlo]

There’s NO money in usb?

[@stefanhoffmann2748]

Great news - but unfortunately still no USB-Version for the Apollo`s ... :o(

[@risingphoenix1484]

Because its going away

[@DennisPeraza-px7md]

I’ve been waiting for UA to bring meaningful updates to their interfaces and this is not it… very disappointing.

[@shawnyvibes]

Great video love question you asked about the gen 1 thanks 🙏

[@FerIsella]

is that it??????

[@darkestpointofficial]

UAD interfaces have become like Apple always selling the same shit but with new features

[@DjR3aper]

I knew it!!!

[@Filipmarinchev72]

Nothing against UA but RME all the way !!!

[@rpj7736]

Still no MIDI In/Outputs. Why not?

[@alainjulot3490]

Not really a big deal because Midi through USB is better.

[@rpj7736]

@@alainjulot3490 I have a higher latency (not much but recogizeable) with MIdi USb than going through my Scarlett interface

[@alexbreyer6921]

It's an audio interface, not a MIDI interface. You can plug any MIDI device into the computer with USB.

[@henrikpetersson3463]

As said, it's an audio interface. Most people use midi over USB these days anyway, and the few who doesn't can grab a midi interface. Not a big deal.

[@rpj7736]

@@henrikpetersson3463 it´s more that I think for that price they want they could easy include that. It´s not nice to transport 2 interfaces on the go if 1 can do it

[@blasegangbeats1865]

I wish they upgraded or at least added more dsp chips

[@marcelstaats]

Sounds like Apple selling you a "new" iPhone..

[@pacastarsupanova1696]

I thought the products we bought already did all that 😩

[@jessemiller6231]

No 32 bit kinda confused me.

[@SpikeColgate]

?! Upgraded converters along with a whole load of software features that I'm no doubt not gonna have access to on my Apollo X Gen1 unless I upgrade the interface itself? Annoying....

[@alainjulot3490]

If I have to buy a new unit this expensive for a tiny difference, I don't mind waiting for 2 or 4 years to buy it used and cheaper or don't buy at all. This is ridiculous. If Gen1 was good enough for commercial music production, what convincible features that unit comes with that would make it stand out? Come on! Antelope Zen Tour SC has the same Dyn range and it's been on the market for awhile.

[@60secmusic96]

we need Adat In and Outs! We need AMD compitabikity of uad pci cards.

[@xlilxillx]

ok the sonarworks integration is peak lfg

[@cubexBeats]

Honestly it feels like nice addons but as I’m using a Twin Duo Interface there is no need to upgrade. Solid addons, definitely, but I wished they would have integrated better / more DSP Power.

[@SaniBanks]

UA is the apple of audio engineering lol

[@Gahttz]

Auto gain and sonar on master bus is definitely something that can be patched into console for the current Apollo x line I'm sure but they want us to buy new converters to unlock this feature? SMH

[@itskarimomran]

Didn’t the UAD representative in the video mention that the software upgrades will be available for both Gen 1 and Gen 2?

[@Gahttz]

@itskarimomran the sonar will but not auto mic gain which I'm sure is pure software

[@derrew-ey2yv]

so basically go get a black lion mod to my gen 1 x6 got it

[@ppppp3388]

Now the future of uad is gone. 😢

[@thechiefmusician9802]

Make the update for the 1st gen Apollo x4 it's the newest one, get your consumers a break 😁

[@xlilxillx]

all i care about is are the dsp chips more powerful? why are there no octo models? you should lead with that, if they're the same chips there's no point. autogain is nice i guess but if you're recording in 32 bit floating point you can't clip anyways so ...

[@Clasam09]

Do you feel you need dsp in 2024 and beyond? CPUs are so powerful now. Or is it more that you're already invested in the ecosystem? Or something I'm completely missing

[@xlilxillx]

@@Clasam09 yes it’s still essential for my workflow. Changing buffer sizes is such a workflow killer and i need real-time monitoring on my vocal chain while i record bc i mix and record at the same time. Onboard dsp is still a killer app imo

[@10MilliJay]

I’ll Stick With My Apollo PC USB Interface

[@djaj844]

For everyone complaining what else do you want them to do? there are still alot of musicians that haven’t switched to UAD, every product they drop isn’t for EVERY customer. Maybe this product isn’t for you. Relax 😂

[@reianae.smiley8573]

That’s what some have been trying to tell them: if you don’t like it, don’t buy it….

[@michaelcurnutt]

If it is better show us the proof, so a to b proof. We were hoping for more powerful DSPs

[@Henrychamber-r8w]

Save 800 odd and buy a gen 1 it just theese will last longer for updates etc

[@risingphoenix1484]

Honestly nothing. Changed….. new conversion dynamic range and THD….. ok what is it? Big leap… such as? Auto gain feature….. eh…..I don’t know most people have external preamps and know how to set their gain. The room correction ok is new however people have to pay for it but already have either a Sonarworks, Arc 2, or a Trinnov. The bass management is nice feature… But is this a really a big upgrade? I don’t know, probably not, I would have preferred more inputs and outputs and a lower price. I’ll stick with my Antelope Audio Orion 32.

[@JayTheLane]

Utter waste of time this update. Replace the Sharc chips with something modern and future proof. They are repurposing old tech with small improvements.

[@RetySethofficial]

Virtually every product company behaves like Apple company now.

[@rockchunk9417]

Far too expensive for what your getting the 16 channel version needed to be 32 channels for that price nothing new worth having👎🏼

[@IntheDAW]

honestly If they added just a tiny bit more dsp this would be such a amazing update. either way its a pretty good update. I might buy one. even tho I already have 3 x8p and a x twin quad.

[@BerkinJr]

No questions about DSP? 😮

[@musicman4life685]

Way too much money for 90s DSP technology that you don't need today. You can build (if you know what you're doing) or buy a powerful PC that you can use as your DSP to run as many plugins as you want.

[@77advanced]

The mid got midder

[@musiccreation1198]

Sorry, but Yawn. I'll be sticking with RME and investing in a M4 Max 16" MBP. 100% Native. DSP is dead ...for **me**.

[@jimthesalad]

This is incredibly disappointing... UAD should know better....

[@LoudnessWarsSurvivor]

No USB models. Lame.

[@tee2008j]

Ahhh so really its all a firmware update got it lol

[@ZikiMusicWHV]

All nonsense! It will only be good if the preams are better than with the old ones otherwise nothing for me

[@wrekkingcru]

"Gen 2" and still the same old as eff DSP??? And this "Gen 2" thing took how many years for you to crank out??? Universal Audio Apollo "Gen 2" = FAIL. I have an old Apollo 8 that I have been waiting for ages to upgrade, and this Apollo "Gen 2" release will almost definitely make me switch back to Apogee after 10+ years on the UA Apollo train...very disappointed, UA team. Adios...

[@VanAntony-l3k]

Jackson Elizabeth Miller Gary Rodriguez Larry

[@Ayeyomilo]

Oh wow auto gain!!!!! Take my 💸💸💸

[@JpeterZoom-gt3pn]

UA is not the best RME beats this

[@jimbotski]

UA - What a joke

[@mikeryan2454]

Nope

[@ELKASIDAV]

a ¡Jesús va a regresar, arrepiéntete!Romanos 10:9 Biblia del Jubileo 9 Que si confesares con tu boca al Señor Jesús, y creyeres en tu corazón que Dios le levantó de los muertos, serás salvo.

[@adirkse]

This UAD-guy is so full of BS! Nothing's really changed .The time needed to setup the autogain, is the same time to set it yourself! And then the Sonarworks feature, it isn't even available yet! Just a bunch of BS!

[@hamzaelouaraktv5341]

hahahahahahahahaha big different

[@brooksroman2918]

Well, that was disappointing

[@3clectic0]

Love uad!

[@istvantoth7431]

another bs review from a retailer...

[@krisjeneson5017]

The Andertons guy looks lie hes smacked up and just spouting nonsense. Seriously Andertons I could co host this better

[@diegooliveirabenjamin]

Was never the best

[@BlairSangeetC]

First to like 👍🏻 hi from India 😊

[@BlairSangeetC]

And first to comment too

[@LaloRaj13]

@@BlairSangeetCCONGRATULATIONS 🎉

[@DMBCJ21]

This is trash!!!! Same interface.