Unleashing the power of the Flipper Zero with custom firmware

[@haXez_org]

00:00 Introduction 00:30 Picking Firmware 01:26 Unleashed Features 02:35 Community Apps 03:50 Community Games 04:13 Disclaimer 05:25 Updating Flipper 05:48 Backing Up Flipper 06:45 Failed Web Install 07:05 Manual Install 08:20 Flipper Unleashed 08:40 New Infrared Features 09:14 New BadUSB Features 09:21 Misc Applications 09:50 Tool Applications 11:09 SNEK!!! 11:26 Arkanoid 11:38 DOOM Rip and Tear! 13:03 Flappy Bird 13:18 Zomboids 13:48 Tetris 14:49 Tic Tac Toe and Conclusions

[@5905-k8v]

Hi I want to duplicate my car with this tool and store the remote code into a blank circuit remote from Arduino can this device send the code to a blank remote made from Arduino??if so will the remote hold the memory of the code forever so I can use the remote over and over again or will it last for a day and that's it ??

[@francisco.segura]

​@@5905-k8vI don't really know how you'd do that since most modern cars have rolling code in their fobs, meaning a new code is generated each time based on a specific algorithm. You'd have to determine how it generates that code (maybe it's already been discovered by someone) and write an algorithm for that remote. Who knows, I could be wrong

[@joshuadelgado2109]

youve helped me 3 different times from just watching how you download things.......thankyou

[@ricedbroccoli]

Picopass is an RFID memory chip I believe. It has something special about it that stops someone from skimming one of the cards normally, but this app was made to get over that

[@maelstudi0]

Very well done video! I just found out about the Flipper Zero and custom firmware seems really fun, thank you for showcasing it

[@haXez_org]

Thanks! really appreciate your comment

[@somebody3271]

@@haXez_org nice video

[@horacinis]

You couldn't install it via the web because you had qFlipper running, I was having the same issue as you, and as soon as I closed the qFlipper app, the web site for updating it was able to see my Flipper. Great video, thank you so much!

[@Mx-hl4jq]

Can you go from unleashed to stock firmware and can you update from unleashed to a new unleashed version

[@zartoz777]

Yes

[@blankiitog2747]

How? And which is better ??

[@BeeBee-rf4bh]

Yes unfortunately I had to do both, I went from stock to rogue to Xfw but it ended up crashing so then I put it in recovery mode back and power button, then I did Xfw and tried going to Badflip and it crashed got stuck on a animation, had to go into DFU mode center and power button and then recover it

[@rump-gaming3326]

the reason it doesn't recon is because you need to close the original flipper zero program first. close the flipper program then press connect on the webpage

[@ja.935g67]

That's like running Doom on a TI-84 plus calculator using mirage os.

[@RobinHood0919]

Great video! Much love from the U.S.!

[@GoldenGirlTimmy]

Great explanation this litte device has lot of potential. Waiting for more videos SUBSCRIBED

[@joshuadelgado2109]

just did it .....the name might differ for thw down load but its the txp youll see it ...thankyou man

[@kamkwoo]

The reason it wouldn't work on the online updater is because you had qflipper open

[@theamerican7080]

7:50 when I click on the file, I get no response from the Flipper- just another bunch of files are displayed. Stuck...for H O U R S.

[@GueroHabanero]

Thank you, i had recently loaded to this cfw to the doom port and to get access to a lot of fun. For whatever reason to got back to ofw do i just update it to an official release?

[@TillmannHuebner]

You cannot connect to the flipper through the browser if you are still connected with qFlipper

[@ciarankellaghan6158]

why is bluetooth not longer in tools for me

[@kobesalyers4570]

you have to close the flipper app to pair it

[@tonytone4332]

Can I use it to shut off my upstairs neighbors alexa speakers?

[@justinharveyjohnashby]

Not legally.

[@iyeetsecurity922]

Depends.

[@derekdwuma4842]

ALL I CAN SAY IS THANK YOU

[@cybercriminal1985]

i download the tgz file but i see the icon like winrar and no white like you, is that a problem? dont need to extract ha?

[@haXez_org]

Yeah, I didn't have 7zip or WinRAR installed (new build). Should be fine as you can install it from tgz.

[@GIaucoma]

Isn’t xtreme superior now?

[@unstyled3509]

hey I've been tempted to get a flipperzero and I showed my friend part of this video and he said that you need a board or something with it, do you need anything more besides a computer, the device itself and the sd card? thanks

[@csicee]

no you do not

[@unstyled3509]

@@csicee ah okay thanks for that, i would ask a question about the roguemaster firmware but this videos about unleashed

[@csicee]

@@unstyled3509 i can help you about rm

[@LP-fy8wr]

You need an add-on board if you want to do anything with 802.11 wifi but thats the only thing

[@unstyled3509]

@@LP-fy8wr ah okay thanks for that

[@CarKeyGuyNL]

how can i input the doom cheat codes IDKFA and IDDQD??

[@allhailwaldo1851]

You need to close the qflipper program to update from the web page

[@mattstitz2087]

Question is, can "unleashing" really harm the hardware?

[@justblank2653]

any flashing has a chance, but unleashed is fairly safe

[@thrasherbox7181]

Patiently waiting!!!!

[@haXez_org]

🤔What for?

[@thrasherbox7181]

@@haXez_org flipperzero to arrive!!! Then getting unleashed firmware!!!

[@haXez_org]

@@thrasherbox7181 Nice, I'm excited for you. Did you get the Wifi module too?

[@erichuddleston4611]

@@haXez_org i got the wifi devboard

[@mryt3078]

I have a 8gb sd card would that be enough for this firmware

[@suwankim681]

Hey, i am waiting for my flipper but im just comcerned doing this so is this safe to do and wont make my flipper unuseable?

[@haXez_org]

It should be fine. It's designed well. Make sure you wait for the updating process to finish before unplugging it.

[@suwankim681]

@@haXez_org got it thanks you for the reply :)

[@bman7810]

It bricked my sh!t

[@tomwisniewski4534]

Is it always in english or is it changeable?

[@Realmichaelquinn]

My download was unsuccessful and now I don’t have Bluetooth connection anymore to my phone.

[@haXez_org]

Sad to hear that. Tried the suggestions here docs.flipperzero.one/basics/reboot ?

[@pvk6343]

It's my first vue, at 5min 08sec from the beginning, and when you give us the two diagram of the memory (flash) , and you explains that the Flipper Zéro can break down, and never start again. I see too that problem of memory capacity, but ok when you make an upgrade to the Flipper system, that 5ake a good time ,ok the serial connection is not so good for economic reasons of battery. I don't know ow at this time before I take back this video ,I think that I have take the risk if the documents say let your micro SD card in the device during the update process....

[@Hassan-bj3ce]

I wanna buy flipper zero but i have one question is it possible to get wifi passwords?

[@liltuff7303]

No you cant

[@caraddixt1195]

@@liltuff7303 Yes you can. With the wifi board you can steal peoples wifi and get into wifi that requires a password

[@d_o_o_m_e_d5939]

You can write a badusb script for windows to obtain all stored wifi passwords

[@Pieman16]

in qflipper it says "[DEV] Full Update @Cirize ERROR: Cannot find update directory"

[@addamyx]

thanks so much

[@Jakeeeshx]

How come the ghz remite dont work

[@luckydog947]

Can you just get the zip version and or do you need the tgz version

[@MrXtahsee]

how do you update firmware when running custom firmware?

[@monkstandinglast]

manually check every once a while the source and simply update

[@Buttermilkmafia]

Just installed unleashed, now how do I get brute force ?

[@liltuff7303]

You need to drop down and give me 40 burpees an 3000 reverse gorilla crawls. Brute force will appear afterwards

[@ipwnxdemonzz4223]

Where can I find petrol station file for the sigh

[@joshuaraley686]

how are you gunna say it doesnt have a wifi module but then say it can deauth

[@iyedchamakhi]

7:09 if you close qflipper will work

[@declan4651]

Somome help mine won’t download I’ve got update 0.70.1

[@homepc1527]

Would you recommend this firmware over roguemaster?

[@haXez_org]

Funny you should mention that, just uploaded a video kzbin.info/www/bejne/n3O3ZGqQfbJ5iKs might still be processing though. I think I prefer RogueMaster. It has everything Unleashed has and more. Both are great though.

[@titoleon4930]

Bro I can't work this with my mac book..... I know alot of other people having trouble as well

[@haXez_org]

Are you intel or m1? I’ve got an intel based mac which I will test it out on this weekend. An alternative options could be to virtualise a Windows environment using a developer/evaluation copy of Windows and do it that way. Should be able to pass the USB through to the VM.

[@fragment7]

I have a macbook and it works fine

[@Gcod3]

Good job

[@back2wallstreet875]

Can we unbrick it ?

[@powerdry9118]

Looking for the most complete flipper forum ?

[@kkya]

yeh

[@liltuff7303]

In New Zealand cuzz

[@powerdry9118]

I literally don't remember writing this..... Odd

[@SnctAU]

Is it actually illegal?

[@Shark-pj8in]

Oh its illegal to turn off the AC in a restaurant..? Well with this? Idk about that they might kick you out though.

[@thesoul2871]

They have extra firmware but can't make anymore you know where they sell more flippers?

[@pandorasbox7957]

Yes I can point you in that direction

[@SoundScapeSpectrum]

👍

[@larrylar5935]

I'm an Amiga!

[@nightwing6925]

Could this be used to crash drones

[@aperitifs]

Most drones when the signal between remote and aircraft are interrupted, trigger the return to home .. you would need to plug in a signal booster , or amp . To overpower the signal, tho with my drone it's able to change channel when the one it's using looses a good connection

[@crazierthorn10]

Eng1n33r deleted all his stuff.....sketch

[@Drey_doll]

Lmao the whole point is that I’m trying steal the cards from the people living in my skyscraper apt. Lmao if anyone has info on that lmk

[@hart7536]

Lol skip the fist half.

[@08inferno]

Hoky hell! 15 minutes telling me how to read directions. Life force lost forever.

[@profittaker6662]

Make a video how about combine all the main Xtrema, Eng1n33r, UberGuidoX, RoguaMaster, Xmaster IamJacoby, Hak5. etc.. . All in one (All tools, applications, hacks combined to same) ZlipperZero

[@offair5513]

How can I get it? Have alot of stuff in my house that I could control and make my life so much easier 🥲 but apparently they don’t ship to the USA 💀

[@kaimeyer6334]

Please read.... It's out of stock on the US site.

[@ricedbroccoli]

They are gonna be restocking within the next month, when they do it should be available in the US according to their Twitter account

[@alexiocatan5602]

you can build one for 15$

[@1.8millionvolts87]

@@alexiocatan5602 Please do explain

[@peaceicedtea7695]

restocked