UNREAL Mini Gaming PC Build - Xbox on Steroids

[@thedeejlam]

For a second I thought I was watching Optimum.

[@slicks8152]

Same type of vids,editing,and even builds 😭😭😭

[@coolalcoolal4165]

Copy and paste all of Optimum’s videos. Annoying if you ask me. Even the laughs in between. Optimum made this video Friday.

[@pokepokepoke64]

@@coolalcoolal4165what the fuck are you talking about

[@Just_Call_Me_Tim]

@@coolalcoolal4165 Oh, I hope he actually did. 😂

[@Just_Call_Me_Tim]

Optimum set the standard for ITX videos.

[@ghost-type]

I use the X47 cooler All CU on my FormD T1 and replaced the fan with a 92mm Noctua fan. It's quiet and super impressive. I have it set to 3 slot with my 4080 Super FE and it's a dream. Mini ITX has gotten so good the last few years.

[@andriusmosta]

That’s what I am planning to do . Currently have X53 cooler with default fan. Always wondered how much quieter pc gets with noctua fan.

[@ghost-type]

@andriusmosta From my experience, they're a lot quieter that the stock

[@hansihinterweltler1198]

which CPU did you use and how are the temps ?

[@andriusmosta]

@@ghost-type thank you

[@rexah5452]

​@@ghost-type I did something similar, I found a 3D-printed mount compatible with the X47 and attached a A12x15 (120mm slim fan). The fan covers my CPU, RAM, and SSD heatsinks making my SSF build nice and cool :)

[@GetWiththeProgramGaming]

I had a KZbin notification come in as he installed the cpu, the video title that poped up was "using human beings as a cpu cooler" lol

[@Dantestoussaint]

Monitor mount is fire!! Love that

[@danrv4847]

ikr :( I have an arzopa, I wish it could have the screw hole like that one. 😢😢

[@theflippestside]

I personally like the look of that copper fan! I think making a shiny chrome or stainless steel exterior, with that copper fan exposed to pop against the silver colour of the enclosure it would look badass.

[@hungrythundr4892]

same, pure copper is generally very pretty overall too.

[@waynenakanishi971]

I had bought the earlier revision of this case back in 2021. The building process was so finicky and tedious but I still managed to get it done. Great to see the latest revision has resolved so much problems from the earlier versions. Good job on the clean build. 👍

[@parnavarora]

color grading of whole video is mind blowing!!

[@kensg]

Right..very clean💯

[@avirtualworld4U]

Your builds are diffidently top tier, your channel also top tier perhaps one of the best youtube channels top 2 for sure. I watch every builder in KZbin just crazy about PC's and have saved for a year now for preparation have filled every cart in every pc sellers store and still searching for the perfect build, everytime I find the 1 I find yet another reason to keep looking omg! has to be sff.

[@alextaulbee1566]

I love your videos and always look forward to seeing a new one whenever you feel like posting. I’m finally going to be able to build my dream pc next month and I’m going to build this build. Can’t wait.

[@TwisQ]

Very cool build and id love to see you build another xbox styled pc

[@johnheath8882]

I appreciate your respect for older, less desired CPUs, recognizing they are still very capable despite their age. Demonstrating that we don't always need the latest, greatest, and most expensive to start a new build is refreshing👍

[@kensg]

As alway Devyn great build. I kinda like the orange fan in there it adds a splash of color to the build 🤔

[@SaltyFeta]

The fury what now? Lol

[@xescdelarosa3328]

I have the velka 7 v2.1 and i paired it with an i7 10700k (specs that i already had) and an rtx4090 that i modded a bit so that it can fit. Apart from the severe bottleneck i am impressed with how well the temperatures hold up. Nice video!

[@jeremyg2236]

Does Velka 7 comes with riser cable? Or need to buy separately?

[@xescdelarosa3328]

@@jeremyg2236 if you buy the 7 version 2.1 then it should come with a riser cable. If you get the 3.0 (the latest) then you will have to buy it separately

[@xescdelarosa3328]

@@jeremyg2236 the 2.1 comes with the riser cable included. In the 3.0 it is not included so you'll have to buy it separately. Honestly the 2.1 is the best offer in my opinion and not because of the free riser cable but for being the smallest velka 7 and highest build quality of them all in my opinion. The front plate is thicker and sturdier than in the 3.0 and the metal is not rough textured

[@chm35]

How did u fit a 4090? I am looking at the velka 7 but my 3070 is non-blower style and 3 slots, and is 10mm to thick to fit at 52mm total.

[@fmulleady]

Incredible & beautiful stealth build!

[@thanatosor]

Specs : CPU : Ryzen 7800X3D ThermalRighy AXP90- X47 Board : Asus Rog B650E NVME : Samsung 980Pro Ram : Crucial 32GB DDR5 6000 GPU : NVIDIA 4070 Super PSU : Cosair SF750 Case : Velka 7

[@MarigoldAW]

SFF Gurus sings praises of the Theralright AXP90x47. Glad you finally picked one up! Noctua is great and all but I think they have been outclassed by the AXP

[@Just_Call_Me_Tim]

It’s on my list to pick up. Just rebuilt in the Ghost S1, and want something a little better than the stock fan.

[@xescdelarosa3328]

Compared to the apelfohn black ridge (the latest model) what do you think is better?

[@preytorben]

@@xescdelarosa3328Black ridge and this are both GOAT material for their form factor. I don’t think there is conclusive proof of either one being more than marginally better than the other. The fact of the matter remains that you can’t beat physics and at some point you’ll only get better cooling with a larger heat sink and fan.

[@jeremyg2236]

​@@preytorben the only downside for black ridge, is that it's not compatible with AM5, at least as far as I know. I wonder if they will have updated version to be compatible with AM5.

[@jrg4587]

Devyn. Keep going brother. I absolutely love the builds. Your aesthetics. Your filming. Yeah sure it may be similar to other tubers. And no lie I watch some of them too. But when yours pop up. I’m always a viewer and supporter. Keep it up brother. Amazing work and GORGEOUS builds. Very pleasing to the eye to watch. Cheers bro 👊🏻❤️🔥

[@xBravo412x]

Will I get better temps If I go with everything here but use the Ryzen 5 7600x?

[@BrunodeSouzaLino]

It's funny how backwards the PC market is. Considering the amount of limitations you have with a Mini-ITX system, the parts should be cheaper than their MicroATX or ATX/EATX equivalent.

[@SalvatoreSantillo92]

you should build an AIO PC in that Ninja Airfryer

[@kensg]

😂 Now that would be…IMPRESSIVE!

[@Gonzie6]

The case might as well have shipped flat packed

[@no_no_no_no_no_no_no_no]

Your content is amazing. I absolutely love the builds and I've learned a lot about building ITX. I'm planning a build with the 7800xt and 7600x. I hope it goes well!

[@jboogieboard]

This is very helpful. Would you recommend an internal HDMI extension?

[@ahmedmuafaq6798]

bro just build my dream setup😮‍💨☹

[@Chris_7103]

How much did all the components cost you? This build looks pretty sick

[@hwi7114]

I use the same Asus 17" monitor with a very similar monitor mount on my Velka 5 while I am traveling, works great.

[@cognacbrown]

I think the key here is that it supports 47mm LP CPU coolers. If its Velka 5, then its down to 37mm and the CPU options narrow further. I ordered the Velka V3 version. Not sure why it provides an extension hat. I'd rather they provide the extension cable. Unless of course the extension cable does not allow full passthrough. Another peculiar thing is that even as I ordered both the case and the riser together, they are sent separately. I've received the case but not the riser cable......

[@austinkelley5432]

@devyn Johnston what backpack is that??

[@danieltaylor6870]

That is sicc bro if you were to sell it how much would you sell it for ?

[@lucas1975]

Do you think I can fit the Thermalright AXP90 X53, Instead of the Thermalright AXP90 X47 you used in this video with your exact same build except for the GPU?

[@Graneka]

Quick question, why is RAM over 6000mhz a waste of money on a gaming build?

[@Insertnamehere3000]

For this generation of amd 7xxxx chips but not in future

[@jmal]

This right here is my endgame case. I'm happy with my G200, but if time and money permits, I'm gonna further downsize to this one. Great video as usual, Devyn! Keep it up!

[@kalista37]

I know u went all out with the build, but out of interest much how did it cost in total?

[@droobie21]

I've been trying to re-build the prototype Steam Machine in the original case, and ultimately have failed. I don't want to modify any original parts and I'm at the end stage with the case cover having interference fit with the motherboard CPU power connector. Looking at your build here, I've used a LOT of the same components, so at least I'll be able to swap them into a nice, travel-sized case. Sad, but thankful for your advice on this. Great channel, and great builds - thank you.

[@anthonypepito210]

What OSD monitoring software are you using in this video?

[@jcwaka76]

I fit an ASUS Dual GeForce RTX 4070 SUPER OC Edition in my Velkase Velka 7 - there are two positions for mounting the GPU-side-panel. In the (outward) extended position, everything just fits!

[@cognacbrown]

How many card slot is this card? Are you able to fit more than 2 card slot?

[@laurentgagne892]

copper is a little colder until its satured it will cool down slower thus performinh worst than the aluminium version ...with an adapter you can slap a silverstone air slimmer 120 at 15mm they will fit and drop your temp by 5-10 degrees

[@Qwuiplash]

he's done it again!

[@SlightWrkScott]

What is the function of the Internal Extension Cable? What purpose does it serve in the build?

[@sherr6847]

it is so you can have the gpu io on the side instead of it being on the bottom and requiring the feet, making the case taller

[@martibanez6320]

Awesome build sir 👌🏽

[@jomavra4]

Thermalright isn't ugly at all. What you know about beauty huh

[@CuttinInIdaho]

My 4070 non super plays cyberpunk with dlss performance (1080p to 4k) and frame gen, RT psycho, at avg 85fps. This would be even better.

[@fadhil1811]

did u undervolt or stock for the processor?

[@Lolong01]

ROG nuc 970 is came out it would be a great mini PC since

[@enriquejobrodriguezvega9671]

Finally bro the velka 7 !!! My next pc sure i built around velka 7 but i wait for RTX 5000 series and Minisforum BD 790

[@kamilahembi9033]

Can you make a video?

[@samuelhall2397]

Would a 4080 super fit?

[@b0b745]

The look on your face during that commercial about soggy food in a plastic plate is the saddest thing I've seen today. Sorry you had to do that, buddy. Nice videos by the way ❤.

[@kensg]

😅

[@handyputra4971]

Hi, could you tell me the brand and type of keyboard please? 10:17 many thanks in advance

[@evo2985]

Asus rog azoth

[@tyrion911]

7:38 that's supposed to be eye of Sauron lol

[@sazlefraz]

nah its official its the freya butthole test XD

[@bd47]

Idea: An ITX build with a case with triple slot GPU compatibility but only using a dual slot GPU like the 4070 super and using the third slot compatibility with a single slot 10 Gigabit NIC and connecting the NIC with M.2 to PCIe riser. Possible?

[@zette4273]

Hi Devy, will you do a build in Densium APU with 8700g? since its APU you could use 250w passive psu from HDPlex

[@ItsFreakinJesus]

I want one of these cases with some front panel I/O. Give me two type C ports on the front and it's instabought. I'll figure out how to make it all fit.

[@Rock79529]

Need to do a build with the SGPC K66 air, matx/flex psu and 240mm gpu support. Zotac twin eagle 4070.super fits.

[@lungisaninkosi5724]

great build👍👍

[@user-ue8jm2qm9c]

How about plugging that usb c connection to the pc? if the monitor does support power delivery, it should be able to make the build only use one cable for both monitor and pc right?

[@MehmetAli-]

Can you make a video or tips to how to clean your mini pc fast

[@trulsrohk1]

make it slightly fatter and taller to accomodate 320mm 3 slot gpu imo

[@sultan8726]

I kinda wish we could see a benchmark comparison between the Xbox x and the pc

[@itsdeonlol]

This is awesome!

[@kimangel2248]

How much do you want for this mini pc ??

[@JackTotGaming]

What monitor are you using?

[@YoloVib3s]

You should check out the Midori 5L v2 case

[@ganjabobby]

03:49 It's not ugly at all imo

[@keepsanity5556]

Wasn't sure I heard correctly! Full copper heatsink, it's so beautiful. Once I took it out of package I thought I could have it just somewhere for the display!

[@Theprovable]

The goat is back

[@xilllllix]

beautiful!

[@ryannavarro8865]

Can you make a sub 1000 small form factor pc love the content btw

[@vailpcs4040]

What size if the front switch on the case panel (in case I want to swap it out with a lighted one)?

[@Techno-Tanuki]

I am really missing my ITX system. I think I need to find a case for my FE 4080Super that can be ITX and not die immediately due to overheating.

[@robotsix6268]

The PNY gpu shroud looks like an owl. Failed Noctua bid?

[@ashenwattegedera]

How safe are those super bendy PCIE riser cable?

[@jacobandgo7355]

One thing I didn't see here was the final weight of the build? I know you included it for the velka 5 and 3 builds, curious how the 7 compares with the bigger power supply.

[@wpnbuff]

Parts pre-GPU and CPU are just under 1k USD. CPU used here is between 350 and 475. GPU prices can vary. Looking at spending about 1600-2k USD for this build or something similar.

[@Sam-ft5bm]

What's the electric screwdriver used in this build?

[@eedoamitay3341]

Copper cooler looks pretty cool!

[@Aodan]

Do you think I would need to underclock a 7800x3D if I wanted to do this kind of build?

[@jeremyg2236]

I don't think he underclock his 7800x3d.....

[@TheZombieDon]

Dude i’ve been trying to find a monitor mount like that…. where would i even go to find something similar with vesa or at least those random amazon portables??? i’m rocking that matx asus prime case or whatever it is, so im not exactly sure where to even start with my existing portable monitor.

[@nonchalant2295]

where can I buy this exact setup

[@daegan00]

This is so so cool.

[@fuzzyhell]

Love the build. Smaller than Xbox. 4x the price ha

[@surazzamansheikh1774]

Cost of making this build ?

[@NunuPereyra]

Brother last two videos same ideas but this case really good not like deepcool one

[@Thundah_Dome]

Im thining of doing this buld in the near future, outside of thermap paste is there anytbing extra I'd need to purchase? Any specific cables or anything like that?

[@wpnbuff]

did you ever do this build? thinking of following this vid

[@PeteBlack76]

I switched off at the food advert

[@cszulu2000]

I really need a 10gbe option, any motherboard have it or mb with usable pcie slot (with 4080 gpu mounted work?)

[@orangecat1596]

Optimum tech son but idc I enjoy these videos either way ❤🎉

[@legart4507]

Best sff build ought to have sfx psus!

[@crian117]

What kind of PSU cables are these?

[@raycasta10]

Sir, how small can u go? 😢

[@ronniekregar3482]

Yo...I'm sorry, but that cooler is dope as F looking lol

[@aldoperez165]

How you get your cpu and cpu temp on screen like that?

[@kensg]

That is the same question I’ve ask also..🤔

[@m3rcf1ve53]

Can you make it water cooled

[@JM-kl9bl]

do a midori

[@maheshmottram4853]

Anyone know if a 7900 xtx reference would fit without the side panel (would probably 3d print a riser)?

[@danebeee1]

I wonder if that Msi 4070ti super (the small 2 fans one). Would fit in here.

[@sh3riff354]

Msi ventus 2x is just a tad more than 2 slots, say 2.2. This would fit the inno3d twin x2, 4070ti super. 250mm long only.

[@xescdelarosa3328]

The maximum measurments for the gpu are 45x290mm, don't remember the width but it doesn't really matter. Coming from experience here

[@emmetthawthorne]

Moving to college in the fall and I wanted a small footprint pc for the dorms. This raises my budget about 300 dollars but it looks so worth it 😫

[@FritzyFreak]

Did you build it

[@DanielTheBigD]

LOL If my dad were in this room with me while watching this video, I would get scourged midway through 🤣 And I don't even had headphones on

[@ur4raneida]

very early we will be seated

[@aminamin1119]

anybody know the light/monitor stand he use ? interested in it

[@superpejuangcinta]

How to Display FPS, GPU, CPU?

[@BattlefieldSoldierYT]

nice brother