Airlift Performance 3H: Draining the tank + Additional Info! Part 2

►Subscribe to my channel for new videos, the build of my Si, vlogs and everything else that I record and share with you. :)
4 Way Valve Tool vvv
www.walmart.co...
Recommend
I highly recommend that when you get the Airlift Performance kit for your car that you get 2 compressors.
Recommend
I also highly recommend that you get the compressor isolator kit to help with the compressor noise and vibration from the compressors
► Link to where you can buy the Air lift Performance kit and view the options vvv
d2bdmotorwerks....
►Compressor Isolator Kit
www.airliftper...
►Don't forget to leave a 'Like' and Subscribe! :)
►Instagram: @EvilStreetShark
Follow me and subscribe for more updates on new content! :)

[@ryanmartin6618]

Forget these haters. I appreciate you taking the time and explaining some of this. Keep doing you.

[@OilLeak]

Lmao these comments have no chill

[@thenotorioushoonigan3709]

Def the only video I seen that explains what and how to do it thank you 🙏

[@EvilStreetShark]

Np! I'm glad I was able to help!

[@HobbiesandHabits]

That indica be heavy lmao

[@ureonme]

or just get a shut off valve. so mush easier. and use a longer hose so the water coming out makes it outside of your car. or lead the hose to a hole that goes out of your trunk and use a shut off valve

[@baggedchallenger]

Where you buy that drain hose from the bottom of the tank at?

[@Kaz8693]

I guess you can also just take a cloth to it and push. Works same way and catches any liquid 👌

[@ardominguez78]

Do you have a video of how to add a second compressor to your system?

[@sheen471]

Do you have a full video of how to install everything such as harness and how to wire up the second compressor and what size relays if you had to upgrade etc etc I’m currently having a fault compressor freeze and not sure why it’s causing it and also my compressors won’t shut off even if car is turned off etc

[@Tenascity_s10]

I have a problem that I can’t figure out, I re did all my fittings and Checked my bags and other lines and they all work, also drained my water trap and my main tank, my car is all the way on the ground and when I try to put it up to ride hight it says “air in tank too low” even tho I let it prime to 165psi

[@Tenascity_s10]

And I have the same exact setup as well except my tank is powder coated red

[@localz303]

I needa drain the whole tank any way you can help with that without doing nothing

[@bogdan.r.s]

Do you need to let air put before draining the water?

[@olliebrown7636]

look your tutorials can be a bit boring due to you talking slow. Get to your point and move on and stop repeating yourself. zzzzzz

[@EvilStreetShark]

A lot of these videos are old when I started making videos and talking to a camera..

[@yujirohanma9533]

Pro tip, get water traps

[@EvilStreetShark]

;) The line that goes to the tank goes to the water trap located down by my spare tire. The water trap will not trap all of the water and there is water that sits at the bottom of the tank! That must be drained! :)

[@kevinfrmkdz]

EvilStreetShark weird, I have water traps between my compressors and tank and never have water in my tank, only the water traps. Guess its because I dont live in a humid area

[@InfamousMufasa]

SlammedHemi that is where you are supposed to place the water traps to not get water in the tank, so you are doing it right, that's how commercial trucks are also set up with their (air dryer) system

[@matthew6905]

EvilStreetShark how do I do that?

[@matthew6905]

EvilStreetShark lol never mind

[@LITLEGEND]

Do you use a water trap or just the drain hose

[@walteralexis345]

What’s the hose connected to the air tank on the left looking it from the outside of trunk

[@leahrogers9297]

Does that work for nitrogen tanks

[@darinhill5351]

I have a guston. Where is your pressure switch so when tank fills up the air compressors cut off.

[@EvilStreetShark]

Its on the Digital controller! When you look on the controller or bring up the app.. Whatever you set your tank psi to the compressors will shut off when it fills up.. For Example: My tank is set to 185 psi.. When the tank pressure gets low to 169 psi the compressors turn on and fill the tank back to 185 psi and then the compressors shut off

[@darinhill5351]

Can you help me please with the guestion

[@EvilStreetShark]

I just replied above!

[@darinhill5351]

EvilStreetShark . Thank you.

[@itsprinciple-]

can you fill the tank through the valve?

[@EvilStreetShark]

Yes you can!

[@itsprinciple-]

@@EvilStreetShark my truck has been slammed across the street because my compressors gave out 😭 thank you!! gonna air it up in the morning

[@jonathanmacias6522]

Hey man my tank doesnt have the wire to drain it, do i have to buy it or is there another way to drain it

[@OilLeak]

Is this the only type of maintenance you need to do on an airlift 3h?

[@EvilStreetShark]

Yes! Just draining the tank!

[@iiExCEL]

i noticed this was a sideport tank, i see you have two compressors on both side connected, a drain valve on the bottom, a line off the tank to your manifold but what did you do/use for the remaining hole? tank plug? sorry just confused doing my setup soon haha

[@EvilStreetShark]

Yes this is correct! The remaining hole is the tank plug

[@InfamousMufasa]

iiExCEL you can also use as an additional tool port, to always make sure tires are full and maybe use an air tool, like impact in case of needing to take off a wheel

[@EvilStreetShark]

Correct!

[@MrTheHillfolk]

@@InfamousMufasa definitely want to run a full size 1/4 air line for running air tools from, but I'd like to find a waterproof quick disconnect that won't be affected by dirt and water as it'll live under/behind the rear bumper. I might just have to use a ball valve and thread in the quick connect to that when I want it.

[@jorged933]

Do you have a water trap ?

[@ColeHannah]

Does the drain kit have to be at the bottom of the tank or can it be on a side?

[@lilpepaps3367]

bottom

[@gundamgssify9506]

Where did you get that piece that goes to the bottom of the tank

[@tjmccarty6771]

Should I fully drain my tank? And if I am draining it should the car be on or can it be off and then I turn it on after?

[@zk21144]

Did you end up finding out the process? I'm looking to drain my tank just not sure if the car needs to be on and do I drain completely?

[@tjmccarty6771]

@@zk21144 you don’t have to fully drain it and the car can be on or off!

[@matthew6905]

I might get a second one. Mine is started to be slow as f

[@EvilStreetShark]

It might be dying soon... If its still under the 1 year warranty they will send you a new one.. wherever you bought it from..

[@Joediamond91]

Is that little valve enough to fully drain the tank you think? Or do you have to fully unscrew the bottom eventually? I️ have that little valve thing it’s just not connected to the bottom middle it’s on the side.

[@antoniosimental10]

Do you need a different harness for each of the compressors?

[@EvilStreetShark]

Yes! The original wiring harness from airlift comes with one for 1 compressor but for a 2nd compressor you need a 2nd wiring harness! Which airlift sells!

[@andrestiajero8724]

hi quick question what is the name of the thing on the tank conected to the compressor hose

[@EvilStreetShark]

check valve

[@leonardoharo5100]

Where can I get that tube with valve?

[@Ezduztube]

Hello! Were did you buy your kit?🚙

[@idontknow93960]

omg!!!! say "comes with the kit" one more god damn time!!!! i dare u!

[@davidlivesay4240]

Comes with the kit

[@Joediamond91]

Is that little valve enough to fully drain the tank you think? Or do you have to fully unscrew the bottom eventually? I️ have that little valve thing it’s just not connected to the bottom middle it’s on the side.

[@EvilStreetShark]

Joe Stevens Yes! The valve has enough pressure to get out all of the water out of the tank! With no problem!

[@Joediamond91]

EvilStreetShark Even if it isn’t connected directly to the bottom?

[@frfrnocap]

what was that noise at 3:16

[@rushkita]

do you have the link or name of the end fitting for bleeding the system, the one with the tire valve?

[@leonardoharo5100]

Have you gotten it?

[@rushkita]

@@leonardoharo5100 No

[@bloodbath08]

Does the line on the bottom of the tank that you used to drain water come with the kit?

[@EvilStreetShark]

No it did not come with the kit.. Got it separate!

[@Andy_ABG]

could you link that part or tell us whats its called exactly

[@EvilStreetShark]

Its an Inflation valve! www.airliftperformance.com/product/21633/

[@Andy_ABG]

appreciate it man!!

[@TehCapri]

I have the same car and kit, it's my first cold day and for some reason it's not compressing any air at all. Like no air is building up, do you know what it could be?

[@EvilStreetShark]

Hey! So when you try to air the car up! There is no air going to the bags is that what you are saying???? The airlines to the bags must be frozen then.. So whatever little water thats in the line is blocking the air to get to the bags.. So you may just have to wait for it to warm up a bit and then you be able to air up the car! Of course drain the tank constantly and see if you can air out the car a couple times to get any water out of bag lines!! You should be good!

[@TehCapri]

EvilStreetShark thanks for the respond bro! And I just figured it out, my ground disconnected somehow, so that got it all figured out

[@EvilStreetShark]

Cool! Np bro!

[@jelenamilenkovic4928]

Shouldn't you have to put antifreeze anywhere ??

[@edd3055]

One more question, do you know what is the standard airline size this come form? I want to get this ki Air Lift 95727 Digital Combo Kit, but there is not much detail info about that and it does not seems to come with a water trap and i see that they are 3/8 and 1/4 water traps so not sure which one to get

[@EvilStreetShark]

It depends on what size lines you get 1/4 or 3/8! I recommend get 1/4 its smaller and harder to get kinks in the line and the air not get through the system. :)

[@ViEtKiDD617]

UHM UHM

[@tom5051666]

bit loud there my friend :)

[@mractive420]

I got water in my tank bro its been like 3 weeks since i checked it lol any tips on getting it out

[@EvilStreetShark]

It's very important to drain the tank constantly! You should have a valve that releases air out on the tank!

[@richd9771]

OMG I lost a few brain cells watching this video.....learn a bit more about how compressed air creates moisture then try explaining it once more.

[@jessefelix4823]

So 3H comes with ride height sensor?

[@EvilStreetShark]

Yes!

[@silvergold08]

Best investment ever

[@richardberger414]

Basically (6 times)...

[@edd3055]

Hello Sir, I am thinking on getting the Airlift autopilot V2 kit but it only comes with 1 compressor, you think I should get a second compressor along with it? and how noise are they can you hear them from the cabin, are they kind of annoying? and how often do they turn on and off?

[@EvilStreetShark]

Yes! I recommend getting a 2nd compressor because with 1 compressor it takes longer to fill the tank and the noise will be longer.. Yes you can hear it in the cabin but with the compressor isolator kit it helps reduce the noise and vibration. The compressors only comes on when you fill the bags to raise the car.

[@edd3055]

EvilStreetShark I see that is cool i am going to get a second compresor then, thank you for sharing all this info is very hard to find this stuff, i just watch the video where you go over your kit and it was very informative

[@CurtAkeroyd]

could you send me the fittings i will need for the tank please

[@chrissmith7688]

Use your words fam lmao😢

[@josephcogdell9386]

You got a ig

[@EvilStreetShark]

IG: EvilStreetShark