UPDATE EcoFlow Delta Pro Ultra - 4 months since install!

[@bobswanson8464]

Great System....well done.

[@Grandmashomesteadhaven]

Thank you for watching!

[@atticushexcel9567]

Very glad to see this update. After watching dozens of videos yours answered most of my questions. I encourage you to interact with commenters on your channel. I have a couple of questions I would like to ask you, but I am tired of wasting my time on various channels, trying to build a decent relationship with a Content creator, so thank you very much for a good job done on your installation video or rather post installation video.

[@Grandmashomesteadhaven]

I will try and answer any questions, but I don't know it all, I am self taught. Good luck.

[@tlteal]

@@Grandmashomesteadhaven I don't have all the answers either but will try to help you all I can. :-)

[@latasham.mcpherson5451]

Thank you for the update! I just started building my Ecoflow ultra and this info helps tremendously.

[@Grandmashomesteadhaven]

@@latasham.mcpherson5451 Your welcome and good luck.

[@MrRichardyc]

you should get the SHP2 so you don't have to manually switching the circuits, you can get it for $1099 via their 'get upgrades for less' link.

[@unijabnx2000]

Thanks for the update, Im hoping I can get two inverters and use a 50A generator inlet to power my whole main panel for about 12 hours a day

[@Grandmashomesteadhaven]

@@unijabnx2000 I wish you all the best.

[@Moes_Prep_and_Tech]

I have everything accept my stove as well but this his how I got around it, I bought an induction plate and put it on top of it. I have a microwave that has an air fryer and convection oven option, and then there is the instant pot and electric water kettle. You could use one burner on the stove if you put everything on an interlock switch instead of transfer switch but that's an all or nothing approach

[@Grandmashomesteadhaven]

Thank you for Sharing your setup with us.

[@Constitution1789]

When you're only on AC power and have a device connected to your backup ups port, have you noticed that your input is slightly lower than your output? Mine is 1034 / 1082. And even though there's no outage, the battery still drains and recharges about 12 times a day, down two percent and up two percent.

[@tlteal]

Great info! I have 2 Delta Pro Ultra’s with 10 batteries and also have 2 Delta pro’s with 4 extra batteries accounting for more than 75kw of backup power.

[@Grandmashomesteadhaven]

That is wonderful you are blessed.

[@tlteal]

@ yes I am and if I can help you in any way, please let me know. I also have a separate 30kw battery backup powered by Victron 450/100 system since I’m a fan of redundancy and backups.

[@zacke1807]

​@@tlteal I am looking at getting the DPU setup for emergency backup in the first year and then start to add solar next year and start to augment my grid consumption. Everyone on YT says all the positives what are your biggest complaints about EcoFlow. I like to understand the bad with the good. Do you have the smart home panel? Or how did you connect to your house?

[@tlteal]

@@zacke1807 I have the smart home panel 2 setup. My biggest complaint is that ecoflow doesn't have a US prescence and when you need support, you're dealing with China directly. Why is that an issue? Delays (time) as well as language barrier and countless emails back and forth.

[@zacke1807]

@@tlteal did you consider any other brands? I am in between the EcoFlow DPU and a EG4 6K or 12K XP with battery backup

[@bobswanson8464]

Shows how much it cost to run AC.,.even at night.

[@Grandmashomesteadhaven]

Yes, the AC is the biggest drain.

[@timsummey9784]

Do you not have a hot water heater? Does your transfer switch allow for double pole 220? Very informative videos. Thanks

[@Grandmashomesteadhaven]

Yes we do, lol. The EcoFlow Transfer Switch is 10 circuits total, 50 amps. In the A/B slot you can double the breakers. In my first video I go into great detail of how it all works together. kzbin.info/www/bejne/jIXXZGuHqNGrn5I

[@Nofear2405]

I’m confused with the November data. This was posted in Oct 2024, how is it that you have data for Nov??? Is it the October data with a November due date?

[@Grandmashomesteadhaven]

That is how I am billed. The Nov. bill is from the month before.

[@surgpsych]

That is correct. I use TXU in the DFW area and they do the same thing. I have complained to them for the past two years now how the bill is presented, but they ignore US as usual! Makes no sense

[@Grandmashomesteadhaven]

kzbin.info/www/bejne/jIXXZGuHqNGrn5Isi=P0GHN74beF-m0bFg