Update On The HQ And What The Plan Is For It.

[@JK_Kustoms]

Your neighbour is going to love the new engine and exhaust 😂👍

[@justin_8593]

New combo should be sick as brother 🤙🏽 Had a 406 in my Q was an awesome engine. Now have a dart AFR headed 400..what an absolute tyre fryer 😎

[@steelcrazy409]

Your stuff came up on my feed,love what you're doing.

[@paulthompson1654]

Eaton Tru trac centre for the diff . Its a Torsen differential design Flat top 400 pistons with 75cc heads =10.3CR ,,,,, cyl head 65cc flatop 11--11.3 to 1 CR //Deck to piston height of .005 Dynamic Compression needs to match your cam timing flat tappet cam with 2.02 valves around 400--450 max hp with a street cam 400 with hyd roller 242/248 ,,,,,11.2 CR,,, 2.1 inlet valve 220CNC heads 540hp [bigger SR cam ,,, inlet manifold 575hp and bigger carby ] 400 hyd roller 230/236 10.5cr 2.05 inlet valve 195cnc heads 495hp D/plain inlet manifold

[@bethevenden4607]

Satin black bonnet might be an option?

[@downtheshedwithbyron]

Good luck bro

[@downtheshedwithbyron]

We are working on an old ht ute at the moment just got it driving but no brakes haha

[@tiitsaul9036]

These projects never finish. Are you doing the head work yourself? What exactly gets done to heada?

[@rw-vr6vw]

yea I was wondering this too

[@Joedennett69]

The heads are getting a 5 angle valve job, screw in 7/16 rocker studs, and guide plates. In the video i am machining down the rocker cover rail. I always have trouble with making them seal leaving them as cast. I am doing the work myslef as i work at a machine shop.

[@peatergriffin]

I think I might have asked you in a previous vid but where did you get your wheels? Are they 15's and do the factory caps fit ok?

[@Joedennett69]

Yes, 15x6 on the front 15x8 on the rears. The hubcaps do fit with a little modification, bought them from wheel and tire kingdom.

[@peatergriffin]

@@Joedennett69 Beauty. What kind of mods? To the rim or caps?