Upgraded Injectors and MAFS housing for the MK4 GTI Golf. AGU engine.

This upgrade will max out the K03s and and prepare me for the next upgrade. 240hp here I come!

[@anonlincracing2484]

Wooo rare I see an agu build at all never mind over the other side of the globe remember doing all this to mine when I got it the injector cups weep sometimes easy replacement healthy amount of grease in and fanny's your aunt iv got 660 cc in mine with a F21T K04

[@ajrveedub]

Hey there! Haha, it's been a great journey so far! Which 660cc injectors are you running? Are you still using the agu ecu?

[@tirecchatman547]

Nice

[@olliewilkinson2229]

Hi mate you got a link to them injectors? Or a part number? Cheers

[@ajrveedub]

Oh yeah forgot to add that! Here it is! 0280150431

[@huwgladwin6128]

Just subscribed after watching some of your vids , out of curiosity how are you remapping/tunning your ecu with a laptop?

[@ajrveedub]

Hey there! check out my video on flashing a tune using mpps cable :)

[@vanystuart551]

What is part number of injector

[@ajrveedub]

0280150431 make sure it's genuine

[@robertswieczkowski2034]

Cześć widać że masz inne zegary usuneleś imobilajzer A gdzie on jest w zegarkach czy w komputerze

[@ajrveedub]

Immobilizer had to be configured for light to not turn on

[@AlexandruBV]

Hello, what is the part number of that maf? I also have a agu and am waiting for the k04 turbo😄

[@ajrveedub]

The housing you need is: 0280217504

[@carlfranca7233]

What software you using on your laptop

[@ajrveedub]

MPPS Cable. Check out my video on flashing the ECU. :)

[@marioaragones]

Hi mate, i have bought a hybrid turbo for my gti, you could upload a video of programming a tune for our 1.8t, or how to make a tune, you know, staff like that. It would be quite interesting!

[@ajrveedub]

Will do! Ill make a video for flashing on our cars, great idea.

[@marioaragones]

@@ajrveedub 👌👌

[@jimakos75]

Which program do you use to change ecu parameters , only vcds?

[@ajrveedub]

MPPS cable and program comes with it. Check out my flashing ecu video 😉

[@omegapr12]

Omg I have been looking for someone doing this to their car for so long im looking to do the same just missing the injectors but here in my country no one will tune my car because of the "old" ecu on the agu engine, how did you get the tune? Did you do it yourself or? I cant even get a stock tune from my car or the one i have in it currently its making about 220 at the crank, had it flashed but didnt get any file went to a place that did it, i should mention im running a k04 as well, if you could help me where i can get tuning files i would very much appreciate it, thank you!

[@ajrveedub]

Hi which country are you from? I got my tune file from the UK and flashed it on my car myself. The guy can be contacted from Instagram @tuningtechnics. He tunes K04 a well.

[@omegapr12]

@@ajrveedub Thank you so much! I am from portugal, so everyone here refuses to actually tune the car, just flash a file they already have and call it a day and those files of course are for a stock car, subbed to your channel as well, good videos!

[@ajrveedub]

@@omegapr12 if you can flash the tune yourself definitely speak to technic tuning from instagram. He's been very helpful. He is a busy person though haha just gotta be patient.

[@omegapr12]

@@ajrveedub Yes that is what I'll be doing, really appreciate the help thanks!

[@eunoscrew9271]

why dont you do me7.5swap

[@ajrveedub]

Yeah could go down that route but I have acccess to m3.8.3 tunes still so why not use it

[@TheSupergiraf]

love your car mate :) what the full setup of it? is running ko3s my self with some mods

[@ajrveedub]

Mate that a great question . Since I'm coming up to the end of mods with the car I'm going to make a video of a list of mods I've done so far 😁

[@TheSupergiraf]

@@ajrveedub sounds good man 😁👍

[@balancemode4112]

what’s the benefit for bigger maf housing?

[@ajrveedub]

You need it to flow more air, also the stock agu MAF maxes out it's airflow reading at 187g/s.

[@balancemode4112]

@@ajrveedub i’m having issue with my 3” maf housing at 4500rpm after 4500rpm car goes lean… now upgrading to bigger 4” maf housing to fix it

[@balancemode4112]

@@ajrveedub trying to reach under 327 g/s with 4” maf housing

[@balancemode4112]

so i can get to max 6800 rpm without going lean

[@cm3593]

Nice video, I got an eBay tip was it difficult connecting the 80mm maf housing on to the tip??? Only curious as I’m doing this mod pretty soon…

[@ajrveedub]

Yes it was an absolute pain in the back side haha. Lots of swearing but got it on with flat head screw drivers going around it.

[@cm3593]

@@ajrveedub haha no worries thanks for the heads up!! How’s that intercooler video coming along, looking forward to it?

[@ajrveedub]

@@cm3593 unfortunately my intercooler didn't make it to me. Shipping got screwed up, so it's sent back to the supplier... I've ordered a other one fingers crossed it makes it!😂

[@LiFeX2745]

what exatctly injectors you used i have the same engine 1.8t agu with k04-001 turbo and im looking for injectors for around like 250-300hp

[@ajrveedub]

Hi there I used Bosch injectors from Saab 9-3 and 9000 which are turbo engines. They are 360cc. Part number 0280150431. I also installed the 3 inch MAF housing from a mk3 vr6. Both of these items need a tune after installing immediately. You cannot drive without a tune.

[@marioaragones]

@@ajrveedub why, is it dangerous to drive with 3" maf with a 2.75" tune?

[@ajrveedub]

@@marioaragones the MAF calculates how much fuel goes in so yeah, it could be dangerous if tuning is not done properly.

[@vanystuart551]

Hallo bro injector part numbera

[@ajrveedub]

0280150431 make sure genuine

[@vanystuart551]

Where did you bought it

[@ajrveedub]

@@vanystuart551 bought it from my local Saab wreckers in Melbourne Australia. I got them cleaned.

[@vanystuart551]

Hoe manny hp you have know

[@tirecchatman547]

Did u feel the difference after installing

[@ajrveedub]

You need a tune after you install it, but yes I did feel a difference as I had a new tune for it running 23-24 psi peak. Previous power levels were at 225hp according to MAF readings so should be a little bit higher than that.

[@vanystuart551]

How do you flash the car

[@ajrveedub]

Hey man! Check out my video on how to flash your car :)

[@vanystuart551]

Hallo bro the software

[@ajrveedub]

@@vanystuart551 software came with the cable. MPPS version 13 I believe

[@vanystuart551]

Ow okee

[@vanystuart551]

I will check it online

[@borgesaulo]

Nice