Upgraded Shocks for the Redcat Sixty Four Lowrider RC

[@ShadowtheRotarygod]

This is the smoothest moving hopper I've seen so far. Just perfect. Most sound like a cheap plastic toy when they slap the ground. Excellent work dude!

[@commandbo]

This is the most realistic I have seen yet!

[@MonsterPartsRc]

you should do the drive shaft mod... real hoppers hop in neutral so that the wheels can get under them and they hop smoother... these can hop just as smooth if you file the teeth off the last inch or so of the male half of the drive shaft, so when the rear is fully locked up, the drive shaft disengages and the car hops in "neutral" and when you lower it down (Just a little) the drive shaft teeth re-engage and you can gas hop and drive it normally

[@omarboone1220]

I want mine like that! Good stuff!

[@Felgood808]

i love the bounce. so realistic

[@nicalove77]

Dope man I like it

[@jaredsayrc4947]

I might have to try those shocks on my 1979 Monte Carlo

[@NorthSideCustomRC]

this actually was easier set up than the scale look shocks. scale look took some time to figure out good spring set up, these was easy

[@rodri53882]

Where can I buy front stiff shocks for my redcat 64 already made???

[@jasonradford3728]

You installed the light kit

[@vidalfonseca380]

So you left out how to mount the upper part of the rear shock , what’s replacing that ball joint screw on the servo arm???? Everything else is great I appreciate you 🤙🏼

[@NorthSideCustomRC]

My bad, with the stock arm I just forced a m3 to thread through until I switched to alloy arm n the m3 threads in it.

[@BrothrBob]

Can you use Nitro fuel line instead of the glue stick?

[@NorthSideCustomRC]

Sure can at least I don't see why not, should work same way

[@goodtimezta2]

Beautiful bounce but u missed realistic or close too realistic feel to it.

[@KarenVargas-t3n]

Would that work on the Monte Carlo?

[@soy1de3aztlan]

Great info an looks real nice!!! What size of O rings did you used ?!!

[@NorthSideCustomRC]

I used o rings I had on hand from incision shocks, not sure the spec but just want them to be no more than 1mm thick, drop of shock oil too and moves smooth

[@soy1de3aztlan]

@@NorthSideCustomRC thanks for the info bro ima do the mod I like how the ones you installed look 😎👍🏼

[@alexboyne4819]

I wonder if the hot glue will get soft in the summer heat?

[@sprocketsmagazine9801]

Are those the stock tires and wheels? If not do you have a link to buy those?

[@NorthSideCustomRC]

No these are Jevries True 13 wire wheels, absolutely the best wire wheels for the 6-4 www.jevries.com/

[@sprocketsmagazine9801]

@@NorthSideCustomRC thanks

[@albertmiramontes01]

Can we use this same setup for the monte carlo

[@NorthSideCustomRC]

no the shocks way too long, but can use my scale look set up studio.kzbin.infosbebpQNs2UY/edit

[@maximx963]

Cool video, you have to subscribe right away .

[@deadsypadilla]

We used to make our own out of 1/25. This is neat idea, but it takes away the build.