Upgrading 10X Scooter with PMT Tires, MAGURA Brakes, SKF Bearings, 160mm Rotors | ASMR by Dr. Drei

[@MrLindsay55]

I never comment on clips but feel I had to on this. Thank you for the enormous effort you have gone to in producing this. One of the best instructional videos I have ever seen. You are an absolute perfectionist! Appreciate your work.

[@thefpvlife7785]

Scooter mod videos don't get better than this. Fantastic edit.

[@REMUSHELL]

Foarte tare clipul. Arata profesionist cu toate sculele si tehnica de lucru foarte ordonata. Felicitari.

[@RealistKiD]

De mult nu ai mai pus un video de genul. Time to relax and learn something.

[@Roys00]

Great cinematography 👍🏽

[@MetalRoofGuy]

Great video. Well thought out. I really appreciate the intentional laying out of the screws. 😁😀

[@baranyclaudiu2189]

Awesome work my dude...that is now Zero 10x Ultra

[@spoonsarefun]

Loved the video, thought you were swapping to tubeless which is what I'm after,l, alas not. In your video the only things I do different vs you is everything gets a drop of LT on the first threads and when I do the brake I loosen the bolts on the brake caliper mounts ever so slightly and give the throttle a blip.... it will center itself perfectly and you have no scratching/rubbing noise from brake, also works if a little off true usually. Also baby powder on your tire tube/inside tire... this will allow the tire to seat easily and less chaffing/friction after install as well if using hard braking down a hill etc. Fantastic video though

[@messor01]

Loctite 243 is a thread lock, not a sealant, so use Loctite 5910 for sealing instead!🤗

[@jamesthornton642]

Nice job 👍🏻 I always enjoy these videos

[@adamhrncir]

Beatiful work man :)

[@harrison00xXx]

Had to do similar things with my Vsett10+, including steering damper and better oil dampeners its now driving like a mercedes with air suspension

[@sebw3964]

The Cat eyes 😍 Great Work.Still a solid and pretty Scooter.could never do that.

[@PF47Racing]

SL_ Étrier 1mm trop haut, il faut surfacé les deux partie de support du IS-PM (même soucis sur Vsett10 pro 28ah avec du IS-PM 145> 160mm) ;)

[@nicholaspargeter6913]

What an enjoyable watch. Thank you. I would like to know what tyres you used please.

[@stefanradu7102]

Așa ar trebui să se lucreze în orice service. Respect.

[@мишаховр]

And the brake hydroline from the wheel can be moved outward And then the holes where the hydraulic oil is poured can be inserted Or you can insert a hydro line through the adapter

[@MisterSoul2008]

Verry nice! Scooter Meditation!

[@JamesMontana19]

Clean job you are a master 😎

[@rs2klee]

Hi, found this super helpful, my son an me are repairing a 10x that was in a crash, lots of bits broken, and most of the bolts are loose or missing but slowly getting there, the front wheel was hit hard an broke the ring. Lucky for is its not the motor side, just waiting for that to come. It has honeycomb solid on it at the moment but not sure to go back to tubes. They are a little worn and a slight flat spot on the rear. I also think on solid that the top speed is lower due to a lower profile type of tyre? Fully charged its only going 27mph but the power wants to pull you off!, we have a little problem with the eco button as it seems to be stuck on as it does not click on and off like the turbo button does, looking at the back there are tiny screws so going to dive in and see what's happening. We are in the UK and now these scooters are a no no and a real shame, my son loves it but its going to be hard to say its a project and cant keep it plus we are not on private land.

[@spoonsarefun]

Solid tires suck... ensure you are in 3rd gear and dual drive and toggle the eco button on and off while having propped on wooden box and see if noticeable difference

[@syncgy6598]

Yeah know what you mean... just bought a vsett10+ police pulled me over whilst doing 30mph lol 😆 but yeah there clamping down now even though there's still idiots around 3 on a scooter etc I generally ride mine because a friend lives 10 miles plus away. Wish they'd sort the law out

[@bellagio88]

Excellent and detailed. Pictures are worth a thousand words, I subscribed. One thing I didn't understand is it said changing the bolts to metal ones @7:37, aren't they metal to begin with or was it changing them to stainless steel ones ? Could you have painted the rotor with some high heat clear paint after you sanded them down, or use nail polish ? Are all the bearing the same on 10X and Dualtron motors ?

[@iddra1868]

Why would you paint the rotor with high heat clear paint?

[@I0nut09]

Superba trotineta, ai facut treaba buna.!

[@frenchcurse7287]

if u take a look the scooter is beat up and this owner manage to fixit in high quality parts. U made a great work i love and u inspire me thx for the video

[@lamarhillard2179]

This guy is a master 💪👍

[@ZymerPL]

There is any way to tuning this motors for extra power? If I only change controller its change anything? Thx

[@Bornmong]

Wow man, loved it.

[@MrPerroballoo]

Doctor, amazing surgery and tools ...

[@cmsdesign8329]

Marfa, ma uit mereu cu placere!

[@bencoelho3]

I find this weirdly therapeutic 😂❤

[@Antony--DIY]

Very good and clear upgrade (work)!!!.👏👏👏 But why you change site the rear disc...?🤔 For me, from the same site is more beautiful!

[@DrDrei]

The rear caliper is for the left side

[@milordas]

do you using 3 Jaw Bearing Puller (is posted on your tools list) to open motor lid as in 5:05 ? isn't is too small for lid opening as on they site noted work space only 75mm? can you link yours?

[@DanceySteveYNWA]

They're £15 on Amazon bruv. 75mm or 3inch is how much it will pull out, not the size of the clamps.

[@greibonifacio]

Clinically beautiful! ♥️

[@christophergarcia8056]

Perfect!

[@zztop7000]

ALOT of work you have to be a expert!

[@jamalfadesemall9275]

Curious about what you are using as your snake, I have to do a stem replacement on my Varla Eagle One and I can't find anyone with a video of that so I am referencing this one to do a DIY replacement. What are you using as a snake to run your cables back through the stem and the battery housing of the scooter? Amazing video btw, I've watched it about 6 times now, and I'm sure this time won't be the last, I have gained a ton of knowledge about my scoot from this upload. Keep up the good work and thanks in advance. P.S. Just put some PMTs on the ride as well, this vid triggered the purchase.

[@MECamping]

So of I see correct you renovated a 52V 23Ah with 1000W engines, how can you make it go 80km/h? Really enjoyable your movies. Keep it up!

[@caRpetbomBer1]

Its cause there is no load on the motors. Free spins at 80km. Standing on the scooter you get around 60km.

[@aelectroade2940]

Amigo una consulta como se llama esa herramienta que sacaste la tapa del motor me ayudas por favor

[@scelusia4480]

Excuse me sir, what is that black rubber-like thing pasted on the battery? And what is the use?

[@damiandominguezartunduaga]

Hi , wich magura brakes are those ones ?

[@oddsman01]

How much space do you have between the rear tire and shock mount? I have a 6.5” hub motor and want to uses a 110/50-6.5” tire..

[@MarekWrona-o5y]

What inner tube fits best PMT E-fire 10x3? Any 10x2.50(R6) ??

[@Grossebourse]

Good job except the deck with the screws that protrudes and also the disk brake witch touch the breaking pads...

[@RemusSebastianMadMax17]

da ruginesc ca nu dunt lacuite bobinele exista un sprai special, se poate vopsi fara probleme cu sprai de temperatura de tobe, fara sa afecteze ceva, nu mai rugineste veci...si magneti la fel...si eu am atelier...etc. Bafta

[@BarbeRodzTV]

Wowww so amazing scooter brother I like this kind of setup 👌❤️❤️

[@jaminfrenchies5697]

I subbed because of this video

[@bellecomollob995]

Hello master i have quick questions do you know the size bearing 60 bolt 1200w thanks for answer

[@marianpopescu3719]

Salut, știi pe cineva în București care face deck-uri personalizate pentru Dualtron Thunder?

[@marcopodda9520]

Bellissimo !!

[@imonyoutube704]

ive got a 10x clone from Solar Scooters, its a beast, i think the NUFF hydraulic brakes are good enough, the tyres need to go though, im ordering my PmT Tyres soon

[@bryantut88]

is changing the berrings make it a smother ride?

[@DrDrei]

If they're used yes

[@andresizquierdo4220]

Donde venden esos frenos con el sensor

[@mihaisto4079]

Salutare, Detin un Speedxman 9 UP si intampin problema cu jocul de ghidon + numai tine frana pe spate. Unde as putea venii pentru reparatii?? Mss!!

[@DrDrei]

Scrie-mi pe Facebook

[@aidenCBR94]

any information about which bearings? i know you linked some but in the video you show 2 different size bearings, can i get 4x 6003 for all 4 bearing locations? thanks

[@ratchfordgeorge]

impressive!!

[@ManDone88]

Pot sa folosesc lichidul albastru de frână la frâne Nutt ?? Am folosit cel roșu pentru Shimano și la fiecare 2 săptămâni îmi pierde pe la maneta ( palanca care acționează frână ) ... Și am avut două seturi noi și cu ambele aceeași problema ... Mă gândeam că e de la uleiul mineral roșu ...

[@clifblake]

Wow! Will you be my mechanic? Not to mention very cool video.

[@David-ze3ln]

Salut, am cumparat si eu recent 2 anvelope de la Dakor, 10x3 PMT. Le-am montat pe un Vsett10+. Una dintre anvelope dupa ce am montat-o oscileaza, pare stramba. Am reluat procesul de instalare crezand ca am gresit ceva, dar rezultatul e acelasi. Se poate sa fie din camera? Retur nu cred ca pot sa fac, la Dakor pe site scrie ca se monteaza fara camere, ce parere ai?

[@spoonsarefun]

Bearing or brake... find if the rim is true by holding something to rim (pencil?) And see if it touches the entire rotation of rim or if warped... likely your bearings aren't flush or are cockeyed

[@austieoutdoors9763]

lookin good bro lookin good i luv your swingarm in red aswell nice spray job did you do it yeself mate. luv the tyres wot size are they mate

[@jamalfadesemall9275]

they are E-Fire 10x3.0 PMT actual RADIAL TIRES. The guy who makes them started out making RC car tires for his kid and ended up making the best-damned tires in mini bike and model racing in the world. I just got a set in the mail and gonna install them in a day or so when I have time. I can't wait to ride on these things. Pauselli Model Tires is the company name.

[@s77lom49]

not sure why i felt compelled to watch this but i did. must be something to do with how you work and how organised you are. i think i might need to learn somthing from this......

[@marekkorba8739]

HI. PMT 10x3 fit for kugoo g booster ??

[@Robert127]

hey i hope you a re well Dr just wanted to see how you are

[@vicmarc4984]

Back tire looks installed wrong way, the arrow should be in direction of FORWARD.

[@smokerloco5309]

merci enfin trouver ce commentaire j'avais l'impression detre fou ^^

[@nelutataru4662]

Salut. Vreau sa montez si eu magura mt4 sau mt5 pe trotineta mea dar nu stiu ce model sa caut sa aiba switchul pt stop pe frana. Ma poti ajuta te rog?

[@DrDrei]

Am eu mt4-e

[@richarddreger1944]

Sadly bearing links are no longer valid. Can only find SKF Made in China bearings on Amazon now. Great vid though, gave me some good ideas.

[@Maykay1312]

What was that anti rust oil ? Just plain silicon spray oil or ?

[@DrDrei]

Brunox turbo

[@sanquil1]

Hola,saludos desde estados unidos,puedes hacer un video con el dualtron Víctor luxury saludos

[@ak-loz]

That cable is VERYYY close to the wheel.

[@ChuppyCata]

am i the only one that cant use tubes on the 10x? the split rim cuts the tubes as soon as i go over 40km. so everyday i get a flat. do i have some issues or what? i have full tires now but they're so bumpy and small and narrow. anyone care to help?

[@ChuppyCata]

valabil si in romana :)

[@sdfefde]

Lucrarea e frumoasa dar 10x nu are pe departe atata putere incat sa ai nevoie de cine stie ce frane si upgrade :))

[@kypha]

cine s-a ocupat de paint job-ul ala? chiar e misto si ma gandeam ca negru e prea monoton si daca ma decid, poate o duc la un paint job

[@DrDrei]

La vopsitorie auto

[@otyice190]

si eu am vazut imediat ca sunt vopsite

[@filipoobrad6873]

Dont you think 50psi a bit to much

[@glitch-light]

If your going to do it right this is a perfect way. sir you nocked it out the park👍💪❤️✌️👌👊👊👊👊👊

[@dom2025]

SKF isn't Italian, it's Swedish. They have the HQ in my city

[@alexmalone1642]

Uleiul albastru Magura e mineral?merge și la frine shimano?

[@laurentius1986]

Da.

[@wensjoe80]

Why are you using 2 bearings type?

[@DanceySteveYNWA]

Because one side is bigger than the other, if you mean why he used a non rubber sealed one, I don't know why.

[@alexmalone1642]

Ce marca e?

[@smoothcriminalpsydog]

thx a lot!!!!!

[@ciprianciprescu1282]

Salut DrDrei! Dețin o trotineta speedway leger și janta pe roata din fata este făcută din plastic. Am o mare problema ca nu găsesc nicăieri sa înlocuiesc janta. Îmi spui te rog frumos ce sa fac în privința asta dacă exista o soluție sa înlocuiesc roata sau janta cu un alt model sa nu mai fie din plastic. :(( am cautat aceasta problema pe internet și mai nimeni nu reușește sa ii dea de cap. (Roata este de 8,5 inch) Am văzut un model de roata pe evomag la 199 lei de 9 inch de la speedxman dar nu stiu dacă de potrivește:( Dacă nu exista nici o soluție, am sa îmi cumpăr alta trotineta deși nu am pe ea de cât 200km parcurși și deja întâmpin aceasta problema:(( Ajutooor! Detest sa mai merg la munca pe jos :))

[@ciprianciprescu1282]

Totodată ma bate gândul sa o vad și sa mai pun diferența pentru un z8 Pro

[@juliengruau4989]

Salut je voulais savoir i livre en France ezotron mercie

[@bw2878mw45]

Cool bro 😎, that's a great help for me so I can do the same 👍, I got same scooter,

[@Rockin_EUC]

Genius

[@saman1820]

Name of adapter? 180mm?

[@saman1820]

Brake caliper

[@DanceySteveYNWA]

Everything is in the description

[@RemusSebastianMadMax17]

Bravo ,felicitari, pacat ca trotineta este atat de elastica ca si suspensie ca este foarte inervanta si la franari si devine ca o barca in balansare, foarte inervante, prefer trotinetele cu suspensie mai rigida sunt mult mai stabile si mai ok, am mers cu asa ceva , e foarte puternica sa spun dar susoensie este inervanta, nu o suport, kugoo g3 pro e peste, ma jur si kugoo g2 pro am 7000 km fara probleme, etc , in rest bafta, e ok, rulmenti se baga la cald , asa se face de mult, se incalzeste carcasa si pica singur, etc bafta.

[@cataioan8569]

In sfarsit un sistem de franare ok. Nu inteleg de ce merg oamenii pe zoom sau nutt. Exista Shimano, Magura sau Sram cu discuri 160 sau 180mm...

[@baranyclaudiu2189]

Se duc pe Zoom sau Nutt pentru sistemul electric , si pt ca Magura este scumpeanu

[@diegobettoli186]

I want it 😍

[@DanceySteveYNWA]

I like how OCD you are with the screws. 😂

[@RemusSebastianMadMax17]

Eu cu slime original sm 5 gauri si nu am schimbat cauciucu de loc timp de 3500 km acuma am 7000 si schimb al doile pe spate pe fafa are 7 mii original ca nu trage, si cu slime original uiti de pene...etc. eu bag un sfert de tub de 330 ml intro roata., 80 ml e suficient sau 125, la 11 inchi sau 10...

[@jaksiepa3]

⚡Super⚡👍

[@alagappasgostan9982]

Service centre never cheat again.i hope you do more video on any type.but beware,,someone/organization might looking for you because effecting their profits😂😂😂😂

[@LOOKATTHISRAFFF]

Nice

[@okdok3742]

what model is that electronic tire pump?

[@milordas]

seems xiaomi

[@hazardousone79]

You are a scooter surgeon. Dr. Ebike.

[@Trottinet-work]

NTN ball bearings.

[@mecax4301]

everything was cool, but in real life no onw, for real, no one gotta spent that much money on that type of scooter, instead they'd love that one a lot. just the magura brakes uffff!

[@t3chn0w1z4rd]

Forgot the Statorade on the magnets. Great video otherwise!

[@messor01]

You did not install the simering correctly, because the "lips" must always face the direction of the liquid! So turn it over, because that way it won't block the liquid's path!🤔

[@otyice190]

al drak cand faci ceva ce ma intereseaza mai mult baga astia reclama

[@troybrownentertainment2324]

All this for just changing some damn tires? I will just stick with my off road tires instead🤣🤣🤣

[@subzero99613]

Wasting money😂

[@smokerloco5309]

Pneu arrière monté a l'envers regarde la flèche ! t'es pas le couteaux le plus aiguisé du tiroir toi !

[@DrDrei]

I don't know what video are you looking at. Definitely not mine

[@smokerloco5309]

@@DrDreiyour rear tire and ride the wrong way! this is the right video!

[@smokerloco5309]

Look The arrow at 21:51 😉 right video 😜