Upgrading an EVO 8 Fuel Systems - What to watch for

0:00 Where is my fuel filter?
00:50 Overview
02:05 drop in pumps
03:20 Fuel pump names
05:13 Whats your setup?
05:59 OEM hanger vs dual pump hanger
11:00 Fuel pump hardwire kit
14:04 Pressure switch for 2nd pump
16:00 Radium plumbing kit
20:14 Your experiences
Learn more about fuel pumps:
www.radiumauto.com/Blog/Post/A...
BoostedFilms Website
www.boostedfilms.com
Disclaimer: This video is for entertainment purposes only! Perform anything you see in this video at your own risk. Due to factors beyond the control of this video creator, I cannot guarantee against improper use or unauthorized modifications of this information. Boosted Films assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Boosted Films, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Boosted Films.

[@sf2372]

Great to see you making vids again for the Tube

[@BoostedFilms]

Thanks. I usually still make a few videos per month. It's just less evo content now.

[@jaysmith2385]

Great content. I can’t wait for the full length video! I run evospec converted oem hanger to handle two 450 pumps. I have been through a few different alterations on my car but the current setups are a 2.0 aluminum short block with built head and a 67 turbo making around 850.

[@BoostedFilms]

What fuel rail and regulator are you running?

[@BullyBreaker]

Yea we got a good one here fellas. Evo gang needs all the knowledge since most of it is dead and gone.

[@syo_nara1916]

Dude, you’re a God send!! 😂😂😂 I’m preparing to make this move in the next few months.

[@BoostedFilms]

Nice. Do you know what pump(s) you plan to run yet?

[@syo_nara1916]

I’ll be running 1 Walbro 274 for now.

[@BoostedFilms]

@@syo_nara1916 I made this other video forever ago, but it could still be helpful for you. kzbin.info/www/bejne/eHyaZKhnibBjjKc

[@paulmcisaac2125]

Amazing, keep making that sweet Evo content

[@BoostedFilms]

Thanks! This setup is all installed. Working on the video now.

[@timessiah94]

On a single pump e85, I made 415whp and 426tq. I went to a buschur racing 2.3rpm with a 6264. Now running the radium dual hanger with 2 hellcat 450l pumps 8an supply and 6an return. FIC 2250cc injectors and arm fuel rail. Knowing now I would have gone with the radium rail with the fuel pressure damper to reduce fuel spikes.

[@BoostedFilms]

I appreciate the comment. Do you know general what level you'd need to be at to worry about fuel spikes? (also assume arm fuel rail =aem fuel rail?)

[@timessiah94]

@@BoostedFilms just seen tuners say it’s a lot nicer during tuning.

[@MelSavageKiller]

Looking forward to this as i am hoping to do this soon, mainly because the oem fuel lines are such a nightmare to get hold of in the uk and most of mine have corroded. Nice that you are using the stock rail as well as i don't think i can afford to do it all in one go. Only problem is finding the adapter over here.

[@syo_nara1916]

Yeah it adds up and ends up being really expensive.

[@timessiah94]

How much power are you going to run?

[@MelSavageKiller]

@@timessiah94 Not sure, it is running 398 at the moment but all the lines are corroded and the rubber ones are really brittle so just want to get everything replaced. I did look at oem lines but Ross Sport one of the main Evo parts dealers here won't post them due to how fragile they are.

[@timessiah94]

@@MelSavageKillerlol I had the same problems when ordering my drip rails for the roof. Was only one in America and had the other shipped from Japan. I have my old oem lines but shipping them would be a pain in the box it would need. I was just wondering the power goal so you don’t overspend. I have this same kit but with 2 hellcat 450 pumps but I plan on 8-900whp.

[@MelSavageKiller]

@@timessiah94 oh jeez nice, 8-900 would be completely unusable on a British b road lol. About 500 would be about perfect but will worry about that after.

[@jonj4357]

Where did you get the evo outline light?

[@BoostedFilms]

Petro vibes