Upgrading my 2020 Silverado Lights to FULL LED - Turn Signal Lights - LASFIT

Installing and GIVING AWAY Lasfit LED aftermarket turn signals for the 2019 - 2021 Silverados. These things are BRIGHT
Get your LASFIT LED Lights Here! Get 10% off with code: LSH10
Turn Signal Lights (Featured in video): lddy.no/vw4l
Turn Signal Lights (For "Custom" Trim Silverado): lddy.no/vw4n
Reverse Lights: lddy.no/pjle
License Plate Lights: lddy.no/pjlg
LASFIT Floor Mats: lddy.no/pjlm
GIVEAWAY HAS ENDED! Thank you everyone for participating.
Stay tuned for more programs coming in the future!
1. Like & Subscribe
2. Comment on Instagram Photo (shown in video)
3. Follow @LasfitAutoLighting on Instagram
MAHALO!
#2020Silverado #TrailBoss

[@eduardogutierrez665]

I’m install those on my 2020 LTZ Silverado like a year ago. FYI,you can install it from the engine bay just open the hood stick your hand to change the light not have to remove anything

[@donkear7133]

Your right i did the same on my 2020 Trail Boss. No need to go in through fender well.

[@domin8ss]

Same here. No tools needed. Not difficult to access at all, and lots of room this way.

[@4lifechargersfan]

I noticed that you could do this after I installed them through the bottom.

[@XTRAMEAN]

Great must do mod but just pop the hood and reach down from the top and it takes about 10 seconds per side and you need no tools. Great design by GM but should have been LED from the factory.

[@leir2005]

Especially when these trucks are over 50k brand-new, maybe even closer to 60k.

[@danielfrain3521]

Well when you sell 100s of thousands of trucks and you save a few bucks not doing LEDs it quickly adds up. Especially if it's easy for the consumer to upgrade if they want to. And majority of consumers are happy with how it is. I like LEDs btw.

[@benmoore2734]

I agree with the process of popping the hood. Look down just below the headlights and twist tab. Take incandescent bulb out and place LED bulb in the slot. Reinsert and twist tab. Finally, test install. Total time and NO tools needed is approximately two minutes, max. Follow the old saying and acronym, KISS, Keep It Simple Silly. Your welcome and have a great day!

[@bobbygarcia2164]

So I replaced signal light with led and now when I use them I get a notice saying check signal light not working. But they are working just blinking faster

[@shootsaav1383]

I installed those very lights a couple months ago and love them. I just popped the hood and reached down and did the quarter turn to pull the light. Replaced it, popped it back in, no fuss, no muss, no removing screws or anything! Actually did a video, have my 3yo grandson "helping" me...as soon as I get our channel up and running will be posting it. I've already installed these, the reverse lights and the license plate lights...so I'll give everyone else a chance to win! As for the next mod...not sure, but I would like to know if those mirrors were stock or something you added....

[@kylestill9554]

Chevy really made it easy for that, lasfit didn’t even know it’s much easier than the method he’s showing

[@XTRAMEAN]

Yeah it takes about 10 seconds reaching down from the top and no tools.

[@fredp3088]

The mirrors are stock

[@Cristian-su7yz]

I was looking for this comment lol I did the same

[@JordanDietz]

After seeing these installed on your truck every Texas edition I see driving around looks incomplete. The crispness the LEDs add is amazing.

[@thematrix6063]

Did you really do all that instead of just popping the hood and reaching down lol

[@falsehoodexterminator2336]

Lol Yeah I accessed mine from the top. No tools needed

[@stevemarks7173]

I would like to see those bright red taillights smoked out. That would look sick!

[@Superfitcouple]

Went right through under the hood when I did mine, no fender well access needed. Was a GREAT upgrade and I used LASFIT as well, there are waaaayyy cheaper ones available on ebay but Lasfit is known high quality.

[@jayr.1523]

Yea I did too

[@EvilFarmer56]

I'd love to see some more auxillary lighting on the truck. Maybe some light bars behind the grille or some rock lights would be awesome. Another awesome and useful lights are the bed lights under the railing. Love the videos and really give me inspiration for future projects for my truck!

[@newrevolutionone7061]

Just an FYI, I swapped mine out for LEDs yesterday and it is very easy to go through the hood to remove them so there is no need to take the screws out of the panel on either side of your truck

[@cartersilverson5496]

Tail boss would be cool supercharged with a cowl hood and some stanced wheels

[@jaydoublebusy]

Im waiting for a carbon fiber ram air scoop

[@deanmelendrez3662]

I’d like to see some running boards added to the Trail Boss.

[@sethiversen23]

Swing out toolboxes for the bed of the truck are a life changer

[@adambullock3480]

Would love to see you put a leveling or lift kit on it.

[@BjjNinja15]

The trail boss comes with a leveling it from factory

[@adambullock3480]

@@BjjNinja15 it comes with a 2" lift from the factory. Not a leveling kit, still has a rake to it.

[@BjjNinja15]

Correct minor rake but still better than nothing

[@theodoresiler47]

Thanks for showing me these lights they are great but I have a better review for you. I installed my turn signal lights and reverse lights five or six months ago. A few days ago I noticed a reverse light was not working after looking threw the taillight I noticed the bulb had broken off and was laying inside the taillight housing. I emailed Lasfit basically wanting to purchase only one bulb. I received a email the NEXT morning asking if my address was still the same and they would send me a new pair out that day. What great customer service they have.

[@curtaviusr]

I know I’m late but there’s an easier way to take the lights out without tools, just open the hood and stick your arm down to the turn signal and turn. It’s quicker

[@brandonwelch8842]

Dang those look sick. I’d love to see the boss get some love on the front lighting. More specifically some led driving lights and Wrap them smoked to darken the front out further.

[@SpyderGiant]

You should do a leveling kit from rough country or the 3” lift and if that’s to high get the AL2 steps as well. I have the AL2s on my 21 RST and the family LOVES them. Or maybe audio upgrades like we did in the early 2000s but clean sound instead of rattles

[@dwightkeeping9545]

Not on IG or FB. Great looking lights. Would be nice fit for my 2021 Trail Boss. Keep the videos coming.

[@user-nm6wc8fc2e]

I’d love to see a 6 inch lift, big tires, and some underglow

[@bartholmligature4992]

My 2021 High Country came equipped with OEM LED front turn signals. Don’t need to upgrade them, but the rear reverse/backup lights were incandescent and replaced them with Lasfit LEDs! If you have a High Country you cannot LED upgrade, the area where less optioned Silverados have the access circle with the fin to open is not there. Rather there’s a 5mm plastic hex in place of the fin. Upon looking closely at the lense from the front you’ll see there’s a fiber optic light bar instead. Glad I didn’t order the front LEDs!

[@bimbo2000gmc]

The light up LED bow tie would be great to add. Especially with all the LEDs already on there.

[@JBHMedic1]

Love your videos. I have already done a few things to my 2021 just based on your videos. I did the license plate & reverse lights 2 days ago. What an amazing change. My street is a busy street and those reverse lights light it all up so people see a vehicle coming out now! So thanks!!! I would like to see a pedal commander or cool air intake and see if the performance change is worth it. Keep doin what your doin! Thanks man

[@SUPERTONYx22x]

Love to see you add a black Sports bar with 4 led lights added to it..... yes..... more lights! Just to piss off the neighbors lmao jk.. but yeah a sports bar be sick!! And will help when driving in wooded areas and back roads.. I have it on my truck.. comes in handy for looking out for deers.

[@olesarge8147]

I just replaced my turn signals in less than 5 minutes. No need to remove inner fender well liner. Accessibility is possible from the top.

[@ericgarcia3287]

Let’s see you do an aftermarket infotainment system in the truck.

[@kipp1755]

That’s too much. Keep it simple and clean with changes on a car. The system in place for the radio is actually really smooth and nice to use.

[@1999CSVT]

9L7 upfitter installation and tie in the RC Lights to the panel+heavy duty front and rear bumper and auxiliary lighting

[@eliseohernandez6557]

For sure it has to be a winch with the upgraded bumper or if not a higher lift kit from Rough Country!

[@JRaiderNation23]

Would love to see a front leveling kit

[@scottbartholomew8872]

Big fan! Replaced rear bulbs with Lasfit so nice. Also did the Rough Country Lights. Thought I would mention use a oscillating tool with small bit cuts strait and like butter. Have put the tailgate light strip in my Trail boss love it. They make a kit c55384 part number that allows you to pull 7 round connector off back so the 4 wire t plug behind bumper. No hard wiring. Would love to see a Tail Gate strip that is real bright.

[@marioguerra5370]

Would love to see if there’s a led bowtie mod out. That would be cool.

[@wiz36k]

Theres a dealer one that lights up blue.

[@codypaterson9139]

Been wanting that done for my RST but can’t seem to find it in me to spend 300$ on a light

[@wiz36k]

@@codypaterson9139 same here since my trail boss is blue I think it would match the truck but 300 is too much

[@Matthewdennis1]

Love the led lights, I think the next mod should be making the tow hooks black 🤙🏻

[@wheels5155]

I did mine with the same Hyper Dip as the emblems and they came out great! I took them all the way out to do them so I could hit all the angles.

[@domin8ss]

I would like to see you install the GM Upfitter switches so you can connect your current and future mods to 1 set of switches. I've done this on my 20 Trail Boss LT and was able to eliminate part of the wire harness GM required for the Baja Designs light bar you get through GM Accessories. This way, if you choose to add other lights in the future you won't be dealing with a bunch of different switches all over your interior. And, you won't need to run a bunch of wires to the battery. Just connect to the upfitter switches. Other mods I think would look good on your truck are the sport bar GM offers (will interfere with tonneau covers, so you'll have to be very careful with what you select here, also will require disconnecting CHMSL brake light at electrical center and wiring in brake light in sport bar), and the light bar that mounts on top of the sport bar). Maybe also get the A-pillar led lights GM offers.

[@laloprz6201]

I think the next mod should be rock lights.

[@wiz36k]

Some led rock lights would be nice mod

[@13Dtownfan]

Just replaced the turn signals and reverse lights. What a huge difference!

[@harward45]

With me having a 2016 Silverado I am about to install running boards. I would live to watch you install running boards on your TrailBoss.

[@gordonhenwoodsr.5227]

I've got a 2020 High Country and you've made it more appealing for me to make modifications like the LEDs on my truck. Thanks...

[@scottreynolds273]

I just changed mine out.. Loving your channel, my wife not so much 😂😂.. I have spent over 12,000 dollars in the last 3 weeks modding my 2020 TB all from your great ideas.. Of course my new 35-12.50-18 tires and wheels and the BDS 4 inch lift cost the most.. I’m not done yet😎🤝

[@LawnJohn]

Looks a lot better. They should have come stock this way, 2016 to present.

[@jasonchappell3745]

Making a bad ass truck even badder !!!!. Might look sweet with a roll bar with LED lights

[@jhutton8504]

You should do a comparison of the different shorty antennas you can add. The long antenna is an eyesore. I have a 2021 Trail Boss.

[@Allen0592]

The next upgrade that I would like to see for the Trailboss is the Kicker subwoofer accessory kit for this generation truck. GM/Kicker offer two package options for these truck. The first is the Kicker sub with 200 watt amp that ties into the oem system. The second kit is the sub plus an additional 200 watt amp to power the existing component speakers if you do not have the factory Bose system. Attached below is the GM part numbers. Just subwoofer & sub amp kit-19417164 Subwoofer & amp plus additional amp kit-19417166

[@petethiel7129]

I read a lot about catch cans to be used on the direct injection engines also other options for in the grill led lights

[@nesco7615]

It’s funny how us guys get all excited about a light bulb. It looks great by the way I’m doing this to my Tahoe ASAP.

[@seanwbhs]

I own a 2019 rst and I would like to see you create a video of you upgrading the shocks, uca’s, wheels, and tires. I like to save money and I would trust your judgement based on the content you create.

[@dylaneckery58]

Stillen Trupower air intake scoop and it should be compatible with the CAI cold air intake. A dyno run would be interesting with the easy bolt on upgrades. I don’t remember if you did a PCV catch can.

[@shaunsmith7030]

Would love to see if there is a mod for the bow tie to be lit up.

[@dannyneal9713]

There is one. Chevy offers it on their website I think it’s $300 or something not certain on the price.

[@dynaguy6970]

Yeah it’s called a “Glow-Tie” (I work for Chevy)

[@scottbartholomew8872]

Have it not bright at all definitely a mistake. Have all the same setup as his front lighting wise. The bow tie was definitely a disappointment.

[@jongiagni1069]

@@scottbartholomew8872 I have it too. And really like it. It’s just suppose to glow, not produce light.

[@jessemartinez6899]

Nice man! Love your videos. I’ve been waiting for this video for a while. I’m REALLY hoping I can switch over to LED all over. I’d like to see some interior mods or accessories you think are necessary for everyday life. Hope that helps👍🏼👍🏼

[@christiancamacho.]

I would like to see a bed cover instalation for the silverado. I just got a 2021 silverado and ever since I got the truck I been watching your videos; their pretty sick!👌💯

[@rtorres675]

Nice man did the same upgrade on my 2019 Silverado it’s been about 7 months and haven’t had any issues great product LASFIT

[@jeremyw9213]

I upgraded all my non- led lights to LasFit LEDs on my 20 TrailBoss and love them. Keep the great videos coming can't wait to see what's next.

[@petethebuilder4850]

Radar director mod. You can use it in the truck and the ZL1. It would be nice to see which brand you would go with.

[@andrewpetri1499]

Would love to see some more auxillary lighting for the truck. Maybe some light bars behind the grille or some rock lights.

[@GabrielGarcia-ry2wr]

Great Modification would be to put some small wheel spacers to space out the wheels a little bit. I bet your truck would look awesome!

[@ordinary_arkansan]

I'm not sure if you're a camping man, but if you are, you should look into Softopper out in Colorado. It's a perfect bed topper. I had one on my 2006 silverado and I plan on getting one for my 2021 silverado.

[@brandonelrod04]

Modification I would like to see is... A new set of wheels for the Trail boss. I love the stock set but with an offset on the trailboss they look good! Looked really good when you did the swap video. I will be getting one after I finish school and we get moved back to the DFW area. I miss TX. 😢

[@eduardochavez6763]

I appreciate all the awesome content you provide. I installed the Lasfit back up light and plates LED and now all my 3 brothers ordered theirs as well. All thanks to you! I would want you to install some bull bars.

[@HFDGuero]

I would really like to see you run some 2 inch LEDs in the back bumper to it's own separate switch instead of running them to the your reverse lights.

[@eljefe7070yt]

I replaced my lights and completely agree! They are so much brighter and amazing!

[@richardrodriguez8915]

Change the antenna. Really like your videos I have the 2021 RST SILVERADO

[@mikevergara411]

I would like to see the trial boss tuned next or possibly something to customize the infotainment screen to mirror or support video

[@crappieflopper2237]

I would like to see some sort of rack system for the back. Maybe a ‘overlander style’ setup? Love the LEDs! No brainer for sure!

[@LloydBraden]

I converted my '07 Silverado 2500HD to all LED (except headlights) 2 years ago, now it's time to do the same to our new '20 LT Trail Boss. I originally found your channel when searching upgrades for our Trail Boss and I came across your "Biggest Wheels & Tires on Trail Boss" video. I loved the look of those tires on the Trail Boss and want to do something like that on ours. Can't wait to see what you finally decide to put on permanently. Perhaps a leveling kit and 35's for the next upgrade! I'll be watching to see what you come up with. Thanks!

[@estevelerma7305]

I would like to see some rock lights being installed

[@CartwrightFour]

To show off stock suspension?

[@marcoa.betancourt1469]

@@CartwrightFour fr

[@979tx7]

This whole time I was thinking you were living in Hawaii

[@matthewholmes6428]

Good video. I have replaced all of the incandescent bulbs with Lasfit too. I love their products. I was to reach my blinkers from the top under the hood. 2020 Silverado RST.

[@Anthony-gu6om]

Let’s see a lift/level with some wider tires and maybe some window tint! Lol

[@JasonKnightDJJasonK]

Thanks for the vid. Just did the update myself. Reverse camera works so much better at night.

[@m.a9615]

U could just remove the bulbs from the engine bay it's way to easy to do it from there 😁 i replact mine it didn't even took five minutes ... All the best keep up the good Work 👍

[@juanalemany5427]

I actually bought these when you did the reverse lights. I went off the link you posted and saw these bad boys. My TrailBoss is fully LED thanks to you brudduh🤙🏼🤙🏼🤙🏼

[@johnnorman6627]

I would like to see a leveling kit install for the trail boss

[@unixdoes]

YES!

[@jasonworkman7912]

Would like to see how to change the interior lights, dome and map lights. I want to change mine to blue, but I can't for the life of me figure out how to change them. That and hard wiring led light strips for the foot wells and under the seats

[@adambullock3480]

On a side note, you should tell any contacts you have at lasfit they need to start shipping to Canada! I have a 2020 trail boss custom and after watching your video on your reverse lights i want to order some for my truck. Plus i'm talking all the exterior lights (highs, lows, markers, reverse, license plate, and turn signals) but they said they dont ship to Canada ☹

[@alejandrovillarruel633]

I just changed mines on my 2022 Silverado 1500 LT 😎 gives it a more cool looking front. Next will be the tail lights! Shout out to your from Seattle!

[@AidanShourds]

Great video! You just sold me on lasfit for my 2015 Silverado. For your Silverado though, id like to see you tune it for more power and to see how much fuel economy you could gain.

[@LPCliftonMusic]

I’m a little late to the party but I just made the swap on my ‘14 Sierra and while it took some doing, I was able to get it done and it’s awesome. I’m looking at doing the swap on the taillights as well but I may hold off for a bit because I already have LEDs but they’re not nearly as bright so I may have to get on that.

[@coryperkins6751]

Some kind of back rack for the bed!

[@1022rapidfire]

Short term love to see the front windows on the 2020 with darker tint. Long term wouldn't mind seeing a larger lift possibly 4-6 inches.

[@claytonwatkins1185]

Let’s see a sports bar. Aftermarket. Like the special ops bars for the bed but not the Chevy versions.

[@hectorhernandez4547]

Would like to see lighting on the bow tie. Some led to make it pop!

[@tjcardile4193]

Under mount lighting that works in conjunction with the head lights turning on

[@juanadame2802]

I would love to see some ceramic tint to complete the midnight edition!

[@tedt2394]

Again great video! How about a bumper upgrade? Maybe a bull bar or even a winch bumper? Subwoofer..........

[@Nashorn95]

I absolutely love this channel and the content. I really look forward to what lies ahead for that gorgeous truck. Please keep it coming!

[@joshuawesbrooks7295]

Hell yah I'm ready to see them upgrades and I think you should do an air ride suspension for your truck

[@hulkerado220]

Truck looks clean and mean as is but I think maybe some bigger tires and/or wheels or just maybe a more aggressive looking stance

[@sedoshi]

This is something chevy should have done from the factory. I changed out most of my bulbs so far on my trailboss to LED, but I have yet to do the front turn signals. I would like to see some options around the catch can mod or possibly the light up emblem ideas. Keep up the great work.

[@jamesprivitt8753]

I'd like to see an oil separator addition (JLT is often recommended), removal/disablement of the AutoStart function, or potential running board options. Awesome and useful channel, this is my first new car too, exact as your Trail Boss down to the paint, only a 2021. About to start working through your mods this summer.

[@tylersoutherland7905]

Lift wheels and rock lights would be dope

[@nicholaspozolinski3346]

I just replaced bulbs on my 2020 TB LT. Please note: I did not have to remove wheel wall liner. I was able to simply reach my hand down from top and replace bulbs

[@brandonelrod04]

So @Lonestar_Hawaiian Again thank you for the reverse lights. I just wanted to give @LasFit a shout out on their customer service. They completely went out of their way to help me. So in returning the favor I am buying some more bulbs from them and some floor mats for the wifes jeep. Awesome company.

[@xorcst]

Also, I would LOVE a set (or two) of those light pods they’ve just came out with. Purtty.

[@Ellacost831]

Im curious. Have you considered changing your OEM LEDS for the LASFIT? Just curious how much brighter they would be

[@twilson4484]

I did the rear backup light and license light LasFit upgrade and I love it.

[@davidsimms4073]

Bullet antenna, your Hawaiian logo on the back window aftermarket wheels spike lugs, rock lights

[@tylerneff1941]

I’d love to see a more aggressive wheel/tire setup on the trail boss!

[@CrandallEquipment]

Huge NITTO Tire fan. Truck would look great on Ridge Grapplers!

[@yaz3378]

I upgraded my 2020 LT to led also, but I was able to install them from under the hood instead of the wheel liner

[@juliolopez4622]

Could be nice to put some bigger tires, spacers and a leveling kit for the Silverado

[@dancobin1985]

Giveaways on IG suck. Lots of people are turning away from social media. However, you can still get that sub and like. Truck looks surprisingly better with the LEDs.