Upgrading the Trash Can Foundry

[@nicjoseph8342]

Hey Thekingofrandom, just thought that I should let you know that kale wool releases particles into the air when heated that can cause permanent lung damage, you're supposed to cover it with refractory cement.

[@cbittles]

I second this

[@tonyjoezee]

Get that ITC-100h !!!

[@elmoeboi9544]

So would it be unsafe to make one of these. I have the supplies to make it but im not going to if its not

[@KaladinDarkEyes]

Elmoe boi Just use a respirator when using your foundry. The hazard its that Kao wool breaks down and sheds small fibers which are hazardous after prolonged exposure. A hobbyist has little to fear. I do work in foundries and I usually only see them wearing particle masks when cutting the insulation. If you are worried wear a dust mask any time you do anything to disturb the kao wool.

[@huxleywolfkin1202]

100 th like about time someone else mentioned

[@cyprusmiraque]

I feel like every time the backyard foundry is improved, it moves further and further from the original intent of the project, that it could be made with relatively inexpensive and easily accessible materials. The most logical step next would be to make a full kiln/forge and forgo the bucket.

[@jorgechidote]

I agree and disagree though. Because even though you have your “entry level” foundry to be accessible for everybody, you should also look for upgrades if you could do any to your tools or processes as you experience new things. That’s the only way you could get better or further in your own experiments.

[@hypernova3411]

I mean depending on ur budget, it is recommended to get higher quality stuff for ur forge so that it lasts for way longer compared to just changing out the plaster every 4-5 runs. Which is gonna drain ur wallet in the long run (depending on ur usage).

[@electronicsNmore]

The animations really add to the video. A few more months and you'll have that diamond. 😀

[@rxykxx9022]

They are probably gonna make a mold and make a chocolate diamond play button

[@grayscale2355]

Rayhan Playz nah I’m thinking they are gonna make a copper or brass molded play button using that new trash can foundry

[@OmniversalInsect]

He has the diamond but unfortunately now he only does videos like 'what happens to water in a vacuum chamber'. Probably because of demonization or more profit. Really sad.

[@petrolmonkey1973]

Glad he finally got the diamond, may he rest in peace 😞

[@randomsucks2444]

Best one yet! I model mine after this one. Thanks

[@JustinY.]

Primitive Technology Episode 1000: Creating a steel foundry

[@henrik1860]

Justin Y. !!!

[@Lussankya]

Bro u are everywhere

[@jonathanodude6660]

Did you just copy top comment?

[@dominikobora5385]

im fairly sure its actually a account used by multiple people so they effectively watch 24/7

[@SheoSadge]

Y MAN IM UR 10TH LIKER

[@joshuaeverson7440]

King of Random, Jack of Trades. Coming soon: The Queen of Crafts and The Ace of Artifice? I can hardly wait.

[@yomomma6492]

Take the old one and light it up and leave it for about 10 minutes. Turn it off and throw some water or liquid nitrogen in and watch to see what it does.

[@theoledicktwist6247]

PDB123Vlogs a dangerous explosion

[@nolansprojects2840]

Bad Wolf probably not. It would most likely collapse in on it’s self. If you put a cold empty soda can in a pot of boiling water it crumples up. Idk, I kinda want to see that happen!

[@karenpittman6266]

It would probably just oxidize and claps in on itself

[@Ki-yg1ds]

Nolan Patterson that happens because it creates a vacuum.

[@evanrichley7506]

Please do not do this

[@nathanwieland9]

R.I.P I hope his family will be ok.

[@skorch1894]

This guy is alive

[@bluerexgamingz9264]

Skorch Have you not heard?!?! He was found hanging from a tree And was taken to a hospital But he was pronounced dead 😭😭😭

[@nathanwieland9]

@@bluerexgamingz9264 That story is n't true.

[@WarlandWriter]

Can you try building a railgun?

[@guarin6811]

WarlandWriter is it even possible?

[@MKZaman-rk2sb]

its already been made by youtuber the hacksmith i think...

[@WarlandWriter]

Anything's possible ;)

[@binuuls5747]

HOT!

[@idk.zionnn]

M. K.Zaman yea he made it already

[@SpecificLove7]

Nice upgrade

[@TheJnblackwell2007]

Specific Love Creations Yo

[@My_initials_are_O.G.cuz_I_am]

Make your own custom-shaped fire bricks, for a longer forge, so you could forge, for an instance, a sword. Casting the fire bricks would give more possibilities for shapes and sizes, than cutting pre-existing bricks

[@awakeningtotheuniverse7154]

Most professional looking diy EVER

[@bdm1083]

“They’re just a little too wide in some places” I relate

[@coleruiz1488]

AK47KakaBoomBoom it be like that

[@ACash]

That scraping of that bucket is so satasfying

[@Johnnypmcginley]

Next make a protoputy basketball or soccorball and see if it works.

[@sparrowthenerd]

Dang I just realized how close you guys are to 10 million!

[@mr.anonymous5655]

Make a railgun

[@brandoncavazos7965]

The box cutter running along the concrete gave me shivers

[@mistersourpatch7232]

What happends if you coat a ice cube/sphere with never wet then let the ice melt?

[@jay-tbl]

I imagine you would get a puddle of water with another substance floating inside it.

[@gasmaskmanne]

I think the never wet will just roll off. Idk

[@l_d.p_l2993]

I haven’t watched The King of Random videos in a while but I can tell the quality of the videos has gone up.

[@timothypierce3325]

Try melting titanium in the arc furnace

[@sandervanduren2779]

Scott Studios titanium burns when it gets up to its melting point. You would have to use a shielding gas such as argon to keep it from burning.

[@PekkaJoutinen]

That's so satisfying when you cut those firebricks👌😜

[@rajeshreyas]

Try putting the protto putty in the new foundry. How much is the putty durable?

[@jessalee315]

Rajesh Patil they have already done a proto putty torture test

[@jessalee315]

Dominick Schwutke pretty durable except for when it was froze

[@jessalee315]

Dominick Schwutke you can also find the video it is pretty cool

[@treklop7753]

Jessa Lee are you a kor wikepidia

[@brickbuilderx2316]

Cutting that brick in half looked pretty dang perfect to me.

[@yummyherbicide7296]

"This is a million times better in the shade."

[@firespark7092]

Yay quote a random part of the video for no reason. Wow am i clever

[@yummyherbicide7296]

Fire Spark r/woooosh

[@blueberrysans263]

All Seeing Eye of Agimoto when I read this comment I was at that part of the vid.😂

[@TheJnblackwell2007]

Wobble tf u mean

[@dl2k671]

@@yummyherbicide7296 you didnt use that right

[@Ketobbey]

yay!!! you built a thing. I like when you build all the things!

[@BadClownSucks]

This is so cool

[@spykidcgaming7948]

It's amazing how you can make something so quickly and have it last so long

[@markuspl4y]

*Level up!* Efficiency +5% HP Gain +10% *Feature unlocked* It looka coolee

[@abizair1832]

Great animation inside!👍 I hope a diamon button, soon

[@theodorebelmont2181]

You should make a coilgun(/gauss rifle) (Also the wire brush is really satisfying)

[@danielthejediyt1918]

The trash can foundry looks really cool. It’s a very nice upgrade

[@a-lphaofzeldaformegaming7907]

what did you use the older trash can foundry for today

[@chief9997]

a-lpha of Zeldaforme Gaming im high and im trying to proces what ur saying but i cant

[@TorutheRedFox]

ok?

[@erickuhn1042]

Geert Wilders im on the same level as you lol

[@wingsofthunder170]

i understand no, grammar NO! GIVE ME THEM COOKIES!! GRANDMA >_>. ok where was i ? oh yea, me understand you no?

[@williamkariampuzha7951]

This came just in time!! I was just about to put my propane foundry together!!

[@BadlandSurvivor]

Make prince rupert drops using liquid nitrogen and glass.

[@therealspaghetti208]

Badland Survivor prince

[@TracksWithDax]

Jack of Trades, that's a killer name!!

[@jetray5914]

Do something with the old arc welder you made from a microwave

[@lenoraracer6428]

You should put a go pro in the dishwasher or washing machine it would be really cool to see the footage I’ve always wondered what it look like since I was little!!!!!!!!!!

[@raymondgay1024]

Did any one notice that grants not there no more and now it says the jack of trades

[@HairyBottom]

NFFAgaming What says the “jack of trades?”

[@theoledicktwist6247]

HairyBottom the intro

[@jarchive4267]

I noticed that as well

[@martinswife2008]

Ya

[@StarDestroyerXerO]

They were hoping that King Jr wouldn't catch on.

[@igotoschoolitallaght4704]

You should make a giant metal foundry! Go wild!

[@henryfourie9256]

Will you be upgrading the tongs as well to something safer? Especially removing the crucible. Alec Steele had a nice video making purpose made tongs

[@Revegelance]

He actually made new tongs a couple of months or so ago. I haven't seen him using them all that much, though

[@wavyjason_ttv6350]

Henry Fourie true

[@johnshelton4753]

Henry Fourie he made special tongs for the crucibl

[@kyhassen]

I been thinking about this due to a old job I had. If you can manage a slight vacuum pressure from the bottom of foundry you will have way better results and less pockets in the metal.

[@savagecabbage3918]

Why did it say 'The Jack Of Trades' at the beggining?

[@lilrubii6434]

Jack Thompson "The King Of Random" confirmed /s

[@____7460]

Savage Cabbage its a saying for someone who does everything (all trades)

[@QuietStorm44777]

Ohhhhhhh snap! Jack of trades! Eh? 😁 Nice! 👍👑😎

[@MathewZ788]

I miss the real king of random

[@ekxfkrcjmrkfkgkjvi1657]

Mathew Zacharia me too 😞

[@keagster06previously70]

Hey @kingofrandom, you should try to use a band saw to cut these. I bet that you would benefit you. Try using the styrofoam cutter to cut the kay wool too!

[@macuss87]

If you really wanted steel and upgrade the quality a little why not just go buy a used 55 gal barrel?

[@firespark7092]

It would be way to big and inefficient

[@drippingwax]

Like their large foundry?

[@firespark7092]

drippingwax that was closer to 10 gallons

[@greendeere12]

That’s why he would probably cut the barrel in half or so and line it with full size firebricks and kale wool

[@g4mmalotus937]

"The Jack Of Trades" huh? I like it! You should add that to the t-shirts

[@miniclip886]

Are magnetic metals magnetic even when they are liquid?

[@terlindenindustries]

Search for Curie temperature

[@ise_cube6658]

No

[@jakubgames5963]

The part where you cut the brick was so satisfying

[@esbensimonsen3219]

Buy High temperature spraypaint and hydro dip it !!

[@FlowerPowerDeathShow]

if you seal the kaowool with some refractory cement, it will last a WHOLE lot longer. plus it would increase the efficiency. it costs about 25 dollars for a small tub big enough to seal your furnace, and you can get it at your local big box hardware store.

[@CreatingCreations]

Looks awesome, would love to do some metal work.

[@lilpeubes1674]

Yea I know right!

[@FoenixRight]

Curiosity about melting aluminum is what brought me to The King of Random in the first place. :)

[@ShaggyAltman]

Thanks for showing that you still make mistakes! Glad to see you still have heads on your shoulders

[@alexanderzangal4125]

Can u make the lighting in a jar experiment?plz

[@dalejustice9207]

What do i use to melt the metal in? I'm wanting to get into this but can't find much info on it. Thank's great Video!!

[@lxne_wolff]

That's a "HOT" update😂😂

[@theoledicktwist6247]

I love cutting refractory brick it's so satisfying and easy to cut

[@Drips-kh9vw]

Build a skateboard from wood or other stuff

[@buzzgister8361]

OG Loc nice idea

[@Wraithstrike19]

So, an old school skateboard?

[@Drips-kh9vw]

Wraithstrike19 yes

[@minecrafttonythetiger9424]

I’m glad you upgraded the foundry

[@sonicfreak04]

can the foundry reach up to 2000-3000°F?

[@reggiegardner9236]

relaxing music for stress relief

[@mihiravp2748]

Do a torture test of the new cornstarch and backing soda clay

[@AvilerED]

Got to love when a project actually calls for cutting corners.

[@toxicgamer0567]

Show us how to make a diy crucible, to replace old ones or that won't degrade

[@hoovdaddy0505]

Loving the video, but I absolutely love your new moniker. Jack of all trades. In the words of Darth Vader "your skills are complete."

[@ruen96]

never been this early!

[@meta6203]

RubenE same

[@drsenseihugo]

Same

[@yangexue6596]

Same

[@B0ND0N1777]

Hahahaha! When the music stopped. 😂

[@orlandowest1696]

Put magic sand in acetone and other liquids (i.e. gasoline, antifreeze, etc.)

[@collineagen7524]

WOOOOT, Jack of Trades, doubt that is new, but it seems new to me. But I like the name regardless.

[@christiffer]

Instead of making a hot trash can make a cold trash can cooler

[@theoledicktwist6247]

Chris Morris that's actually a really cool idea

[@theoledicktwist6247]

Unintentional pun

[@GOAT_GOATERSON]

Chris Morris How about......... NO

[@among-us-99999]

I spotted a whovian

[@theoledicktwist6247]

i dont know what youre talking about

[@ORC17]

i love these metal foundry videos but i dont know why! keep up the great content TKOR

[@trxppyperez2822]

Can You Try To Make A whirlpool in ur own Pool?

[@chaidreigns]

I would like to see if you can make reusable molds for the Metal foundry mostly because I am currently getting the materials to make my own metal foundry.

[@Wizghosty]

King of random please make a shield with the king of random logo

[@Loc_Rocker]

Is there are way to clean that crucible or have a future one not be so gunked up with leftover metal over time?

[@roguenomad966]

Would be really cool to see you make a pizza oven using similar idea as the foundry. I always struggle to get indoor oven and even outdoor coals hot enough to cook fresh dough under 5 minutes. Please make this a reality

[@theoledicktwist6247]

John Mason propane would definitely be a no go for this, if I were you I'd just get an outdoor brick oven

[@aronbraswell1589]

could you test the temp inside your foundry after its fully heated up? Would be awesome to see temp comparison between old and new design.

[@PrivateDevilZenchannel]

if your insulating the can then the paint won't burn off, right?

[@SgtS0apy]

still gets hot dude, insulation isnt perfect

[@p3eb0]

You're*

[@smikkelbeerbiedo217]

Kinda richt

[@StrafeOfficial]

Don’t know if you watched the video but he burned the paint of while there was still no insulation

[@smikkelbeerbiedo217]

I now

[@bensyroishka6335]

So is the kale wool in between the bucket and the fire bricks only on the top half of the sides cause i would like to build this myself

[@christiffer]

Primitive technology

[@commiedoggo2439]

Christiffer fortnite is primitive

[@ikbenarwin]

I recently made a spline, I was wondering how much longer it would rotate in a vacuum?

[@erickollmann9820]

Why didn't you soak the bricks before you cut them to cut down on the dust. This dust is supposed to be very bad for your lungs as well based on other vids I've seen on it.

[@m4vr1ck]

Because if they dont get dried properly using a painfully slow burn in process to slowly heat up the foundry the water will quickly turn to steam and make the foundry explode violently

[@propyro85]

This is an awesome project, I'm wondering if it can be miniaturized and made discrete, like your mini metal foundry video from 2015? And will it generate enough heat in that smaller state to melt brass?

[@kyuu_09]

Try casting stone tool heads with lava

[@dariopapak9188]

10milions soon like who is happy ! 😎😎😎

[@haydengabriel107]

Can you put bubble gum in a vacuum chamber please

[@Yonatan24]

It'll just burn, it's sugar. (Source: I burnt all of my Halloween candy (more than) once, for fun!

[@MGSLurmey]

They said vacuum chamber, not the foundry...

[@Yonatan24]

Wow, can I get a prize for my horrible reading skills? Wow.

[@kleetus92]

Ok... today's project just gave me an idea for your next project tool. Either an automatic hack saw, or make a band saw.

[@Poukeli]

Here before Justin Y

[@electropika7759]

Justin X He just commented right now

[@zer0b0t]

It's not only that it's dusty, it's the type of dust.

[@finessellobster4898]

I haven’t watched in awhile but why is this guy always making the videos and not the original guy

[@skyeplaysgames6734]

Destiny's DIY's fairly sure he's doing time

[@finessellobster4898]

Mystique the cute blue alien what?

[@jaylittengaming660]

He got ligma

[@jr-qs8xj]

meowstic gaming ligma? He’s Sugondese he can’t get ligma my guy

[@TerminalToaster]

Vieyra777 what's sugondese

[@ebercota5652]

Put kale wool in the Handel so you can take it out easier without burning 👏🏼👋🏼

[@noahwilson9598]

11:00 those bricks look like my teeth.

[@treeman5590]

I would have place kale wool behind the bricks for added strength, Great Video!

[@henrik1860]

First!

[@kyuu_09]

no

[@tpoad0079]

The first to say first

[@juliettemoss5048]

I'm curious why you didn't still line the entire thing with the wool, and then having the bricks for reinforcement

[@ashadieeyahsultana1062]

Psh, you guys are just always cutting corners. XD

[@kil1you318]

great job but I would recommend you to extend the wool all the way to the bottom of the bucket as the heat will seep between the bricks and damage the bucket with time

[@Funnyhatmen]

“The jack of trades” is the last name I would put on that kid, he’s more like a nazi generals assistant

[@JonathanHolt1988]

What keeps the bolts you used for legs on the lid from melting in the foundry?