USE ANY CAMERA AS A WEBCAM (no camlink required)

[@vaggelis161]

Every other solution out there requires money... This is the first free method I came across after all this searching... Thanks a lot mate... :)

[@CUBINGGURU]

I tried mini usb to usb connection but LV option is not visible

[@Mosrod]

Wow, thank you so much for introducing me to this amazing piece of software - truly a lifechanger. I have never seen this application mentioned anywhere other than this video, so thank you so much :) as I have been looking for a truly free software like this for a long time. One thing to note is the developer(s) have released a new application that directly routes the DSLR to a virtual capture device, which is amazing since it requires much less processing and hacks to get set up. Again, I truly thank you so much for making this video and I hope you spread the word about more lesser known softwares in the future! Good luck!

[@RCwithAdam1]

Is there something like this for Mac?? Thanks bring this to my attention!

[@tonysilker9685]

volume difference between speech and music is overwhelming. thanks for good info tho

[@saulgoodmangaming8075]

Tony Silker The music is supposed to be low volume

[@richardh4247]

Really pleased I stumbled across your video - I've been trying to find a way to use my Nikon cameras for weeks - thanks a bunch man.

[@BlxxmYT]

Which Nikon was it

[@AJITESH0614]

Which nikon camera?

[@camilalillo5997]

OMG literally I've been looking for something like this for YEARS (didn't search that much tho), thank you so much

[@DreadedGemini]

Hey, Shaq...are you still offering assistance for cameras being recognized as storage devices?

[@Albi_0ni4]

Did u Fix it?

[@steamgamez6214]

If you are still having this issue, all you need to do is locate your camera in the storage section in the device manager on your laptop and disable the storage one and it'll stop showing up as a storage device, Google will tell you the same thing, I had to look it up

[@rioprobinsyano]

am trying to use this but the live option is in gray color and cannot click, my camera is nikkon p7000

[@GageBakun]

same

[@Djaytiger]

did you figure it out?

[@smartgaming9229]

It does not support some models. My D3100 has the same issue and there doesn't seem to be a solution

[@SnowyBlizzardMC]

Is the nikon d200 not available for live view? My uncle gave it to me in like 2015 it was my first dslr and I haven’t had the money to buy a new one so I’ve been looking all over to try and get this to work

[@jaydj79]

Hey, thanks for that. I've got as far as the Live view on Digicam Control but it's not clickable, it's grey'd out. I'm using a gopro hero 7. Any advice?

Same issue with a Nikon D3100

[@yooho1240]

Same issue with my eos 600d

[@seanerb]

Got the same issue too.

[@adngbsn]

Same issue for me with my GoPro Hero 7 Black

[@Zetsu180]

same im on a gopro 5 black

[@Akselitoo]

on my Nikon d60 live view is not working, is it normal?

[@joelolaya3108]

Do you know if it will work as a webcam for google meets? I’m using a Nikon D5100

[@shay008]

I'm also using D5100 Sparkocam works but theres a watermark Did you find any other apps I can use

[@nickiSTB]

I have an old Nikon D5100 camera, and I want to stream with it. Unfortunately, when I use Live View, the autofocus box appears. A green or red flickering square shouldn’t be on my face. How can I remove it?

[@GuginhaPT]

I found your channel very useful, I wanted to ask how do I image with the Go Pro Hero 7 when I connect with the USB cable it recognizes as a storage unit.

[@danmurray7628]

having the exact same problem, i'll be keeping an eye out for a fix

[@Zyanaster]

You two most likely have to go to devices and manually set in "device properties" to be a video camera, its most likely only showing the storage available on said devices

[@randyattaway8893]

Did you ever find a fix to this?

[@SPECIALJAPANESELANGUAGEACADEMY]

my camera is not working even not showing in the camera list I use Panasonic Lumix G7 Please help

[@Kuriousspirit]

ah when i downloaded the software theres no option to select a camera and the first 4 icons aren't highlighted =(

[@Jayyce]

same i dont know what to do.

[@cardshark4362]

yeah mine doesnt let me use the live view. whats up with that?

[@demetremaidaa4525]

me too help

[@sistersunday1230]

Me too. Waste of time so far!

[@denizakgun4183]

Yeah me too. Someone write a solution or im gonna buy thr brio webcam

[@JLifestyle2020]

Goat channel finna go to the next level

[@AxelChrSchullz]

Thank for the video. My LUMIX DMC-FZ300 (Panasonic) is recognized as a storage device when connected via USB. Do you have an idea how to fix this?

[@KevCaines]

same my lumix

[@internetclipsfromworld]

@@KevCaines same

[@angelsepulveda9126]

I HAVE THE SAMSUNG SL-50 DIGITAL CAMERA WHEN I PUT THE USB TO PC IT COMES UP AS A STORGE DEVICE PLEASE HELP

[@yguensmontina8072]

Can i use this for zoom conferencing?

[@Adam-oj8hj]

No

[@OtterBoiMilo]

Hey man! I have my camera recognised as a storage device, what should I do to fix that

[@JAMESCC88]

make sure the SD card is removed!

[@OtterBoiMilo]

@@JAMESCC88 ok

[@chrispritch]

having the same issue...without the SD card in...? any ideas?

[@marcusunivers]

I use a Panasonic GX9. When I connect the camera to my PC, it asks me if I want to connect it as a storage or PTP device. The software does not find my camera. No matter what I choose, which USB port I connect it to or which cable I use. Nothing seems to recognize the software. My camera also supports access to the camera via Wifi. But I don't know what I have to adjust in the software. :/

[@ursulagambaro4841]

same here

[@youstupid13]

same with a G7

[@jowihood]

Bro i have a nikon coolpix l830, can i use it to stream with this? i mean its compatible for this? plis help me thank u!

[@langetlikisorma]

Is there a Mac version?

[@motormesh-shop]

Creoletof who uses Mac

[@italia689]

Yes there is.

[@j.v7625]

@@motormesh-shop The crazy guy who commented "Is there a Mac version?".

[@CraigPMiller]

Trying to connect a B500 - The software recognised the B500 as a camera but LV was greyed out as were the controls except for 'metering mode'. Any thoughts?

[@rickywei1360]

Is there a mac version?

[@rodakaskas]

fstoppers.com/hacks/how-use-your-fujifilm-camera-webcam-484529

[@rodakaskas]

Some commented that it worked for Sony as well.

[@JRuckus13]

Thank you for the video! I am trying to use my GoPro7 Black, but the LV option is disabled for me and it seems like it is just being read as storage. Did you find a work through for this? :)

[@SofiaDanesi]

Thank you! but is not for "any camera" :( i went to the digcam website and my panasonic lumix DMC-FZ72 is not in the list of supported cameras :'( do you have another option? the cam link it's just too expensive here in Argentina

[@peckeroni12]

Hi Sofia ! where did you find the list of " supported cameras " ? I'm having the same problem regards Dave

[@peckeroni12]

@@AnnahDuqeOfficial thanks for reply, my camera is listed but I can not find the OBS platform he is using ! Do you know ?

[@scvexercise]

Great software! Thanks! I used digiCamControl Virtual Webcam to link my Canon 5D MKIII to StreamElements OBS.Live and livestream to Facebook. Worked seamlessly. USB to miniUSB cable is needed Some specific comments are: camera - worked - detected a Canon EOS 5D Mark III aperture - worked in Av mode. shutter speed - did not work in Manual and Tv mode ISO - worked Metering mode - only tried the Evaluative metering mode white balance - worked - but I leave in auto exposure compensation - worked focus mode - did not change the focus mode of the camera focus button - works in autofocus or manual focus mode on the camera. I am only getting about 18 fps whereas I run my webcam at 30 fps. OBS seemed to be OK however. I like the battery indicator on the digiCamControl display The camera does get warm so I might shade it if I am outside on a hot day in the sun.

[@notorry9223]

Thank you! The cam links are out of stock everywhere so this is great!

[@MarkHoopesMusic]

Thanks for the tutorial. FYI....if you hold down alt key and drag your video window with the mouse, you can manually crop your windows in OBS

[@MDC885]

Thanks for this tutorial, however, after you get the source set up in OBS, how do you make this available as a webcam in Zoom, Skype?

[@ericcosta801]

we all need it for school

[@wildwilderness2115]

has anyone found a way to do it on zoom ?

[@alexisnelson9295]

yeah, all the webcams are sold out at best buy so we all kind of need this :/

[@aaronmindanao3652]

you have to right click the camera source, then click properties, the click deactivate then you can use the webcam for zoom. then reactivate in obs when you're done But if you want to use zoom AND obs at the same time and use the same camera, then you have to download and install an obs plugin called virtualcam, then set the webcam in zoom as virtualcam (obs must be open to use camera in zoom if you're doing it this way)

[@shaqtech]

Hi I just made a video in how to this! kzbin.info/www/bejne/qWTIkp5jea-bac0

[@theh4sh]

My camera is canon ixus 145. Is this camera supporting this software?

[@mattthomas7552]

Can't you just hold alt and drag the size bar to quickly/cleanly crop a frame on OBS/SLOBS?

[@shaqtech]

Oh yea you’re correct, thnx for the tip!

[@emanuel_soundtrack]

haha i would say this, and i am newby

[@VrajaDanut]

My left side of digi app is grey . I can not chose my camera. First 4 feautures are grey, i can not click on them. Why?

[@VrajaDanut]

my camera list is not available! why?

[@acidfilms3105]

Hi I connected my samsung WB101 to the computer following your steps and it reconised the camrea but i cannot do anything! Live View and so on. Can you help?

[@zammygogo499]

I got the same problem I have a Cannon eos m100

[@michaelalmendes6271]

man i use nikon coolpix 500. it is not giving live feedback all it is doing is capturing and that's it. help me out on what to do

[@ago2579]

Hi, ive got a canon eos 600d but when i go to live view its very low fps. pls help :/

[@leonardoribeiro40]

mine 550d as well but his is too

[@anythingbox]

Any mac solution / version available?

[@stevensmith4099]

Window capture a tethered live view.... Clever.

[@callanbentlee3357]

Pro trick: watch series on Flixzone. Me and my gf have been using them for watching a lot of movies during the lockdown.

[@emilianopatinho]

AMAZING!! Thnks buddy, it worked for my Nikon D3200, with the AV/OUT to USB cable.

[@kennethhardman6427]

Shaqtech, Thank you for this instructional video. I do have the problem that my camera is recognized as storage by my computer and not as a camera. You said if we had such a problem, you might be able to help. I was hoping you could help me please. Thank you.

[@randyattaway8893]

Did you ever find a fix for this?

[@kennethhardman6427]

@randyattaway8893 I have not, but have since acquired other means to achieve my desired results

[@kennethhardman6427]

@@randyattaway8893 I did not

[@girlgamergigi6242]

Great tutorial, thanks so much for all this information :) currently in the process of using my Nikon D3400 camera as a webcam. I've noticed the FPS are quite slow, do you know how I would be able to speed it up? Would it likely be the mini USB I have?

[@kylefitzpatrick2141]

mine is also super slow. It might be the lighting and shutter speed. Try adding a ring light. I will update later if that works for me

[@EZain]

THANKS A LOT MAN

[@aryankesarwani8003]

Can we use this method for zoom meetings app..

[@ukaszkalinowski6298]

I think yes

[@shaqtech]

Yes u can, I just made a video in how u can connect OBS to zoom or any other meeting software kzbin.info/www/bejne/qWTIkp5jea-bac0

[@straubreytv5477]

can i connect my fujifilm xt20 camera?

[@DIMASWORLD]

awesome video bro! any suggestions on how to stop the lag and why it would be lagging man ?

[@Cherubimsamson]

my camera is also lagging and whenever i press record, it says "operation not supported" (My camera is Nikon D3200, btw)

[@fongdimbulator]

A warning to Nikon users; unfortunately, it seems that the Live View output of most Nikon cameras is limited to 640x480 pixels, making these cameras a poor option as a live streaming work-around. Also, Sparkocam does not support most D3000 series cameras so if you were planning to try that software next you may be better off with a completely different camera or investing in a proper HDMI capture device.

[@heaintrocky]

like a camlink :>

[@MarVlach]

I have a problem. When you say at 4:36 to click on this button for full screen ode. When i click on it on goes full screen in whole desktop, and not in a window like yours. What can I do??? thank you

[@gianlucasgaming9374]

when ever I do it. it says that I can't do anything but look at photos and not being able to record.

[@tiffanychan6556]

How do you avoid the temperature of your camera affecting your stream? When I use my D3200, in 20min intervals my live frame freezes and I have to restart the view in the middle of the stream :(

[@patricelopatin]

Can you use a sony coolpix camera to do demonstrations for you tube videos and zoom meetings?

[@julianczerechowicz9287]

Hi. How do I get this to work with GoPro Hero5? It currently recognizes it as storage. Thanks.

[@janetdominguez401]

Julian Czerechowicz did it work?

[@Poppinmetyer24]

I don't think it is supported. you can check on their website. digicamcontrol.com/cameras

[@mr.potato3797]

remove sd card

[@crazytd9536]

Hit record at the same time and hit stop recording at the same time if you wanna make vids You will have 2 different video files but it should work

[@Morganbtw]

does this work with older cameras like the nikon 1J1. cant afford a better camera so wondering if this will work?

[@MemerDad]

Hi thank you so much for this amazing idea and the tutorial. Edit: I managed to use my DSLR (NIKON D5300) as a webcam. However, my image on my monitor is pretty laggy ( as if it has very very low FPS). And since I am planing to use this as a webcam for twitch streaming, it's not really satisfactory. Is there anything I can do to get a smoother image?

[@majestic_whiffz2199]

You could go on configuration and uncheck white balance and change manually to -5

[@MemerDad]

@@majestic_whiffz2199 Hi again, there is actually an app for NIkon by Nikon that is amazing and totally works fine. But I still can't use it cause my camera shuts down every 30 minutes :(

[@majestic_whiffz2199]

@@MemerDad overheating bud. You're better off getting a c920

[@MemerDad]

@@majestic_whiffz2199 got no money now. I'm using my iphone as webcam for now :D

[@majestic_whiffz2199]

@@MemerDad join the club, that's why I bought a £20 camera and does just as a good job

[@jaietiefenbrunn9314]

Any suggestions for those cameras that won't recognize? I'm trying to connect a Kodak PlayFull from 9 years ago... got the right cables and everything. Thanks!

[@rubencasas936]

Will this work with a Nikon Coolpix p530?

[@Ammit1385]

Donot work, I tried. It identifies but can't select Live View !

[@gaterhd]

Great video really helpful. MY Panasonic Lumix G7 is recognised but i cant get the LV to work on the PC. Any suggestion??

[@jalon.mcinnis]

This also happens to me

[@gearyfps]

My Linux is being recognized as a D drive... how do I change that?

[@Zyanaster]

You'll probably gave to go to device management and help your pc identify what kinds device it actuslly is. I dont know why windows does this but I have had similar things happened to me

[@Zyanaster]

Its probably only recognizing the storage on the device, and not the actual device itself

[@CEGryphon]

For anyone having issues with the camera being recognized as a storage device, most all DSLR cameras use the mini HDMI port. Look into getting a capture card and using the HDMI port instead of the USB port. Most of the time, the USB only works for file transfer.

[@niklas6293]

thanks i was actually wodering that :)

[@paisley5918]

Hi Shaq, my camera sony alpha 6000 is recognized as a storage device. I'm using a pc with win 10. Do you have any advice what I can do to solve this situation? Thank you for this video cheers

[@deanschenk4107]

Thanks. Been looking for app like this.. only, won't recognize my OLYMPUS E-500. Getting F:\(_??_usbstor)(WIA) Any advice?

[@TheShivanshGarg]

Did you find any solution?

[@seanandreigensole1090]

same as i mine in appears D:\(_??_usbtgor)(WIA)

[@deanschenk4107]

Still looking for the solution.

[@lamb9692]

couldnt get it to work with my GoPro, do you have any ideas? It's a hero 3+ and I'd love to use it as a webcam

[@JuBerryLive]

Man, you just saved me 500$. Thank you so much. How come everyone is saying you need a camlink when a simple usb plug and that amazing digicacomtrol software is enough? Again, thanks man.

[@shaqtech]

Ju Berry glad I could help! ❤️

[@joycezaraolan7186]

@@shaqtech Hi Sir! Does Nikon Coolpix P510 applicable to this software?

[@soumyadipkar4308]

Can i use this software for mobile?

[@ursularezende5430]

When I open the software, my first 4 icons is not available and it even recognize my webcam. I ve already unistalled it and downloaded it again.. however, it isnt available yet. How should I proceed?

[@michaelherzog9514]

same

[@laurgao]

same

[@ArtistArt_Yulia_Altas]

Thank you for your video! Its really great advice. Do you have any idea how TO GET THE SAMETHIG for MAC? Still looking for helpful advice...

[@NiroshanRanaweera]

how do I connect it to the zoom we conferencing

[@bugadifino05]

yup - whole reason I watched this video

[@davmormedia7956]

I found this solution, but it according to the comments it only works on Mac & Canon kzbin.info/www/bejne/rXaWlXufnsh2eZo

[@nortontownsley5917]

Shaq. I admire your philisophy - there must be a cheaper way to do things. I tried out your method with my Sony alpha 6000 but could not get a connection between the it and the computer? Thus it never showed up in the software. Any thoughts/advice. Are there some preliminary settings I should make on the camera itself?

[@bigdaddyprofit]

i'm late but i believe sony now has it's own software

[@art.basant]

Thanks! I had try in many softwares and this was the best!! and free!!!

[@shaqtech]

Básant awesome great to hear it worked for you!

[@ornino54]

@@shaqtech Can i use Sony A 7 lll help please thanks

[@e.v.3625]

does it work for meeting apps? (Zoom, skype, etc) Thnks in avance

[@camranh_royal]

Is Dijicamcontrol from communist Chyna??

[@SaucyULTRA]

Will it work with the Canon M100 has a webcam cam on OBS Studio?

[@xera9071]

do you know of any alternatives for Mac users?

[@BHsoFunny]

What's the standby time on your Nikon. Mines is 30mins which is trash. I usually play longer than 30mins

[@ursulagambaro4841]

my cam is opening as a storage device... how should i proceed?

[@emmagreat9285]

In the comments below someone mentioned "use the mini HDMI port. Look into getting a capture card and using the HDMI port instead of the USB port. Most of the time, the USB only works for file transfer."

[@mikems947]

I have an old Sony TRV525 Digital 8 I am using as a webcam with my Mac Pro 5,1 and it hasn't really cost me anything except a couple hours of experimentation. The old Sony which was once at the cutting edge of technology when I got it years ago, has what Sony calls an "i-link" port which Sony labels a DV in/out that is really a small port that takes the end of an i-link cable which is really only a Firewire 400 cable with a small 4 pin plug at one end and the usual rounded 6 pin 400 Firewire plug at the other, cost about $10 Amazon or elsewhere. It wasn't known as Firewire at the time, but IEEE1394. I attached that to the Sony port, and since the Mac Pro 2010 has Firewire 800 ports I took an old adapter I had (costs about $8 on Amazon) that changes a 400 to an 800 plug on the front of the Mac Pro (the two 400 ports are beneath the USB ports on the front of the chassis). A little bit of trial and error but Zoom recognized the vintage camcorder like an old friend. I am going to have to set up a mike because I haven't figured out audio yet, but I do have an old plastic preamp and mike somewhere just in case. Anyway, the camcorder is auto focus and has some bells and whistles, but must be set back from the monitor as I fill the screen and you will too.

[@eusufzai]

Thanks a lot. How did you remove the focus box of the Live View ?

[@blvkkgoku3359]

I am having the same problem with my canon T6

[@ciaodavada]

Bro, I have same as u. But my computer recognize il as a hard drive... Is there something else I have to do . Pls help

[@IkeSTeeLETV]

Thanks for this info. but for mac users what's the alternative or options?

[@triennial9307]

whenever I use live view, nothing shows up. How do i fix that?

[@therealdurfee]

camera may not be supported

[@triennial9307]

@@therealdurfee "use any camera" anyways it doesnt matter, I made a solution

[@universityofchristianstudi1190]

I have a sony NEX-5 and it doesn't show up, does this work also for digital video cameras?

[@KevinsGotAim]

Oof you need NEX-6 your cam isn't supported

[@lordedho2574]

Dude, i have connect my camera to my pc using Digicancontrol, and my camere read by that software but why the icon "LV" canno be click?

[@ca.cma.nirajshah7509]

Can we power Nikon D3200 without battery with usb cable? Please help on this. Thank you.

[@nickgamz14]

Title: "use any camera as a webcam" Him: "use a DLSR camera as a webcam" so its not any camera then

[@sydneyacton2887]

fax

[@RicardoRodriguesDosSantos-d9w]

Hello Shaq. I was hopping to use my old Nikon D70s but it seems like it doesn't activate the live option. Any advice? Thanks

[@grae6331]

Hey, awesome vid! I was hoping you or someone is still paying attention to the requests for support because im using a Sony HandyCam AX33 and im getting DigiCam to recognize it but it wont let me use the LV feature. Any suggestions?

[@nacholibre_za4822]

Im aslo having the same issue, the LV is lighting up so i camt click it

[@kittempest2462]

I'm trying to connect a Canon Vixia HF M41 and can't get it to work, probably because it only wants to connect as a storage device. I'm wondering if there's a way to use an HDMI to USB connection and have a program get the video feed from it instead. I'm less interested in remote camera control than just getting the camera feed into my computer to be used with Zoom, etc. Also, I have two actual webcams connected to my computer that digiCamControl doesn't recognize. I'm not sure it's supposed to. But it would be nice to have something that could access them so I could adjust their brightness/contrast and perhaps digitally zoom in.

[@robertlim8202]

hi, Shaqtech, manage to get my Canon EOS 700D working as a webcam. Question to you why it is laggy? It is not as smooth.

[@dr0nygames]

Same thing here

[@aroze0233]

Robert Lim Same

[@cameronrhodes2433]

Same. It's not laggy using EOS utility but it turns my camera off after about 30 minutes. Anyone found a work around?

[@christinelaraorilla-cortez1140]

HI...Can I just use this DigiCam control so I can use my Nikon D3200 for Zoom meetings? Or do I need to download other Softwares or App?

[@TheNewArtSchool]

Is there a MacOS version of digicamcontrol ?

[@hautehussey]

The New Art School id like this as well!

[@FroggyInTheBoggy]

hey does anyone know how to make the camera not show up as storage I am using a Kodak Pixpro FZ152

[@basicgamerguy865]

me to i need to know the same thing.

[@sheikhshahriarahmed4526]

Damn thanks man! This is a lifesaver !

[@joshbraaten6619]

Connected my camera to this but for some reason I’m not able to go live, I have a Nikon d3000.

[@nacholibre_za4822]

Hi! Great tutorial, only issue im having is that the LV is not lighting up for me so i cant see my camera? I have a Nikon d3100. Everything else is there except the LV is not clickable because its not lighting up?? Please help??

[@landen.dh07]

I need it to recognize it as a camera not a stoage device

[@JAMESCC88]

make sure the SD card is removed!

[@whithkerbithcuit2021]

@@JAMESCC88 Some older Nikon cameras had the option to switch between USB options of MTP/PTP and MSC in the Setup menu. Mine did, switching it fixed this issue for me. Maybe your camera has a similar option.

[@sridharciyer]

Nice Video bro, clever idea. I have only one issue. My LiveView on OBS is a little laggy. Is there any way to solve it?

[@piotrfilec]

Hello! Your tutorial was very useful for me. It works very nice with my Nikon D5100. Thank you very much. Greetings, Peter.

[@shaqtech]

Glad it helped!

[@raahilparikh4623]

Hey, i have the same camera. Did you have to connect to ur pc via mini-hdmi or the a/v out cord?

[@piotrfilec]

@@raahilparikh4623 There's no need to use mini-hdmi or the a/v out cord. I used the USB Cable for Nikon DSLR D5100 which was included in the box. You can buy this cable here: www.amazon.com/Cable-Nikon-D5100-Camera-Computer/dp/B01075ADMM

[@nickiSTB]

I have an old Nikon D5100 camera, and I want to stream with it. Unfortunately, when I use Live View, the autofocus box appears. A green or red flickering square shouldn’t be on my face. How can I remove it?

[@joshthomas6219]

thank you ! does this work for go pro?

[@estewart1466]

my camera is not being recognized, first four icons on top of screen not highlighted...help!!

[@Supser]

my Canon T6 which shows as compatible did the same thing... I read in the T6 manual that when connecting go into the menu and disable wi fi/nfc. i did and the camera was recognized. On to my next thing. :-)

[@rollwiththetroll7497]

@@Supser oh wow, i have a vixia r800 and I can't even find the wifi shit on it. The laptop is not recognizing my camera. how did you find the wifi area?

[@wesleyhayward3619]

@@Supser I did the same thing! disabled the wifi/nfc in the settings and my camera was recognized right away

[@5473111735]

@@rollwiththetroll7497 Vixia R800 has no Wifi capability. It's cousin the R80 does.

[@gearyfps]

so do we have to keep the program open in the background? like while streaming for the camera to stay on

[@tatianagarciacam9488]

Hi! The app doesn´t recognize my camera and the first four icons are not accesible. Please help!

[@jironiedeveld5344]

Mine too. It would be great if he could respond btw XD

[@Phanton404]

I'm trying to use my Samsung DV100 for this but whenever my PC recognizes the camera as such instead of an USB storage device, the Live View option in digicamcontrol is not available, what can I do?