Use ANY Wireless Mic with the Rodecaster Pro 2 | DJI Mic | Rode Wireless Go

[@LaloRacer1]

Amazing production quality and straight to the point. Appreciate you!

[@kriedholm]

Thank you, LaloRacer1!

[@PaulArmstrong1964]

Great video! I have the DJI and Rodecaster Pro II and wondered if I could attach it. This is exactly what I was looking for!

[@kriedholm]

Excellent and thank you!

[@PaulArmstrong1964]

@@kriedholm You're welcome!

[@ELFKidsVideos]

Will this work with the original forecaster pro?

[@kriedholm]

It should!

[@kissu_io]

I was looking for that thanks. 🙏🏻 My idea would be to diffuse the sound to a big room thanks to an outputting PA speaker at the back of a meetup room. 👌🏻

[@kriedholm]

That's a great idea!

[@Babbzy]

Thank you soooooo much for this video 🙏🏾🙏🏾

[@kriedholm]

You’re welcome! Thanks for tuning in.

[@knowtech2576]

Well done Kri; a very informative and helpful video.

[@kriedholm]

Appreciate it!

[@Mattias-Eriksson]

Great info. We just bought a Rodecaster Pro 2for a podcast that we are starting. Oh, we are also Las Vegas based.

[@kriedholm]

Oh nice! What’s the name of your podcast?

[@jkkbackupchannel]

Thanks a lot for the tip mate. Just what I needed for an upcoming livestream

[@kriedholm]

Glad I could help and best to you with your livestream

[@kamoshikaproductions343]

Thanks for this informative video! If I have 5 speakers could I connect 3 DJI Mic 2 receivers with the 3.5mm to XLR adapters into the back and have 2+2+1 transmitters connected to each receiver?

[@kriedholm]

The RCP2 will accept up to 4 xlr input/adapter combos. So yes, theoretically this will work. Test it though to be sure you don't run into interference issues.

[@ZacharyCarterTV]

Thank you. I have a couple of original Rode Wireless. This video really helps!

[@kriedholm]

Glad it was helpful and appreciate you tuning in!

[@tb09277914]

Thank you for this. Very simple and to the point. What if i have one receiver and two mics. Is there a way I can use both mics?

[@kriedholm]

If both mics run to your single receiver, you’re all set!

[@G209-b4y]

Will they each record to their own channel? So I can adjust each mic separately in real time and in post?

[@AvisBoone]

*I want to do this set up on my Zoom 6. Does each wireless mic record to the same track? Meaning, if I plug in the receiver in the XLR #1 port and I use BOTH transmitters (Mic 1 & Mic 2), do they record only to XLR #1 track?*

[@kriedholm]

Each wireless mic will record to the same track in this case

[@77shoemanable]

Great information. I happen to have the equiptment

[@kriedholm]

Glad it was helpful!

[@SydniStephens]

Liked, and subscribed. Is there a way to connect 4 Wireless Pro 2 receivers to the Rodecaster Pro 2? We run a podcast with 4 speakers and I’m having so much trouble trying to find information on how to do this 😂

[@kriedholm]

Welcome, Sydni! You can only connect two (2) Pro II transmitters wirelessly with the RP2. You can be creative using the adapter/info in this video to connect a total of 4 though!

[@thatzedpodcast]

Super helpful video 🙌🏾

[@kriedholm]

Glad it was helpful!

[@IcEdUp856]

I followed and liked... thanks for clear message..and the links

[@kriedholm]

Appreciate it, Gengis!

[@asmashingwayita9200]

Any follow up on this firmware? i am considering the Rodecaster Pro 2 and i would like to know if it's reliable to match with my Rode wireless go 2 :)

[@kriedholm]

You can sync up to 2 Wireless Go II's with the RP2, so you should be all set.

[@bjrnutgard7271]

Thanks for this very helpful video! Would this setup also work for a live stream where you use the audio out from the RødeCaster Pro ii to speakers in the room?

[@kriedholm]

Appreciate it and I don’t see why not!

[@theot3625]

Great Vid Thanks... Is it TRS to TRS or TRS to TRRS cable?

[@kriedholm]

Thank you! TRS to TRS for the cable.

[@Q8Webmaster]

Thanks for the very informative video! Do you think that audio processing will be successful using this setup? Or at least the 3 default Presets in RCP2. It would be great to enable live Podcast processing for the wireless input.

[@Q8Webmaster]

I got the answer. Its actually working perfectly and smoothly. Thanks :)

[@kriedholm]

Definitely worth experimenting with!

[@AndreAlves-ok4wu]

Thx for the tip. I appreciate that.

[@kriedholm]

You bet!

[@mosesmike5486]

Please try with the Mackie DLZ Creator.. i'd be interested to see if these wireless mics work with that system.

[@kriedholm]

Definitely would if I had one!

[@mosesmike5486]

@@kriedholm thanks for responding.

[@timlyg]

can you give me a link to order that samson table top mic stand? Thanks

[@kriedholm]

Sure! Here you go: amzn.to/3Us7Vc1

[@AvisBoone]

But I do NOT want it on the same track. Do you have an idea of a splitter option?

[@kriedholm]

I don’t but hope you find a solution

[@kendrickjarias]

Hello 👋, you said wireless go2 and wireless ME will work without receiver, what about the new Rode Wireless Pro?

[@kriedholm]

Add the RWP to that list!

[@kendrickjarias]

@@kriedholm thank you

[@hamishroland5664]

I have the Rodecaster Pro 1 & Rodelink mics with a XLR Adapter however what I find is that when I plug 2 of these into the rodecaster when it's recording both mics pick up a lot of feedback so I have to have them turned down a lot, wondering if you know a solution to dialing that in more.

[@kriedholm]

Unfortunately no as I don’t have these devices. Keep experimenting and I hope you find a workable solution.

[@themediadiamond]

hello, I have the same problem, how did you solve yours?

[@effervescentmediatv5857]

I just bought a Rodecaster Pro 2, and I’m torn between the DJI or Rode Go. Any suggestions? I love your teaching style. Can’t wait to see more. Thank you ❤️

[@kriedholm]

Thank you and you can’t go wrong with either. However, being able to connect the rode wireless go II directly to the Rodecaster pro 2 is pretty slick.

[@G209-b4y]

I have Rode Wireless Pro, does it connect same as the ME or GO?

[@kriedholm]

Yes!

[@WorldAlternativeMusic]

Is there any way to use one headphone to a rodecaster pro2 and behringer umd interface??? I want to use them both at the same time.

[@kriedholm]

That's a good question! I don't have a Behringer to test that out.

[@WorldAlternativeMusic]

@@kriedholm maybe other interface? Is there any splitter that we can use maybe?

[@sijavaissu246]

Can we use also with the rodecaster pro 1?

[@kriedholm]

Yes!

[@themediadiamond]

@@kriedholm hello, ive noticed the rode caster pro 1 has no line in option. is this an issue? thank you.

[@kriedholm]

@@themediadiamond I don't believe so but I don't have a 1 to know for sure

[@themediadiamond]

@@kriedholm thank you for the reply 🤍

[@SamuraiCop]

Great video!!

[@kriedholm]

Thank you. Glad you enjoyed it!