thank you for your videos, they are very helpful and clear. can you please provide the difference in height of superlift knuckles? it would help me a lot in fabrication of my own knuckles.
@dawson_sweatt2998 Жыл бұрын
I have everything on the Jeeperf kit except I’m using your diff drop. I have a 3.5” clevis lift, 2” ome springs, bilsteins and JBAs. I have basically stock angles and I’m sitting at 5” do you think I could get away with installing a 2” leveling kit to get above 6.5” I was also thinking about the Rusty’s 1/2” leveling kit.
@tisoy909 Жыл бұрын
Okay, so now the Superlift kit for WK XK has been discontinued. What to do?
@miguelonnncazares68623 жыл бұрын
Hi .. where can I find this long knuckle? Or do you sell them?
@jjoffroad97933 жыл бұрын
Superlift is the only one that sells them. They are going to stop supplying parts for our Jeep's.
@joserangel51952 жыл бұрын
So no more super lift knuckles ;(
@fredbernal91562 жыл бұрын
@@joserangel5195 I can't find them on Superlift at all
@veritasvincit41783 жыл бұрын
i watched the video on changeing the cv axle. i am interested in the red lower control arms? where can i get them. do they help correct the cv axle angle? i know your diff lowering brackets seem to be part of the equation. i have an 08 commander with a rough country 2 inch spacer and the bilstein shocks with the adjustment on the 2 inch setting, with factory springs. this gives a smooth ride but the lift is am actual 5 inch's so i don't have hardly any down travel. this is bumpy on small drops in the road and hard on the cv axles.
@johnmcdonnell48132 жыл бұрын
theres no lower control arm drops for jeep wk that exceeds 4in lift?
@bobbylong53492 жыл бұрын
And where do I get the knuckle at or bracket whatever it is I have a 2005 Jeep Grand Cherokee Limited Trail Edition
@jjoffroad97932 жыл бұрын
Superlift no longer sells them. No options at this time. 4" lift is limit for the WK and XK platform
@deathandtaxes89492 жыл бұрын
With the diff drop can you still use the factory skid plate if you cut it out a bit for clearance?
@jjoffroad97932 жыл бұрын
Some drop the plate. One guy cut it and modified it.
@andretecate30763 жыл бұрын
What lift knucles can fit to a jeep commander?
@jjoffroad97933 жыл бұрын
Only option now is stock. Superlift stopped selling parts. 4" lift is the limit for lift now without SL knuckles.b
@johnmcdonnell48132 жыл бұрын
and is there any chance with running 5in lift i can use your diff drop without cv axels touching
@jjoffroad97932 жыл бұрын
I have a coupe guys running at 5". You have to shave about 3/4 " off your LCA between the strut fork. It won't hurt anything. They just grind it down for extra clearance. That would be 23.5" hub center to fender.
@johnmcdonnell48132 жыл бұрын
@@jjoffroad9793 ok thanks
@johnmcdonnell48132 жыл бұрын
have you guys ever made any lower control arm drop kits?