How to replace the Steering Column Switches Peugeot 307 📍

[@UseTool_EN]

BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈 📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱 ⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎

[@cesarmultimedia]

Great video guys, you make it simple and easy. Thanks

[@GavM]

Hi. Great video. THanks!I need to do this with my Peugeot 308. Do I need to worry about codes resetting when I replace it? Mine has indicators, wipers, lights, cruise control and radio. THanks.

[@jqjhshsqnbb8119]

U making things so easy

[@UseTool_EN]

Hi @jqjhshsqnbb8119! My pleasure, I hope the operation went well 👌

[@martinlewis2143]

Fantastic! Great video! Thanks!🎸😀

[@mertcanyavuz9554]

hello sir i hope u see this, after change this com2000, is lock system works well ? cuz i see on internet that com2000 have lock and immobilizer system

[@kamenorezac7758]

Does anyone know and tell me if there is an antenna for receiving the signal for unlocking via the wireless key?

[@pifandrei5743]

Do a new one need to be coded to the car or it will work just by replacing it? Also i remember when i took out mine there was a small speaker that beeps when something is wrong. Where is it exactly, i forgot where i saw it.

[@brendanscottage]

Great video guys, thanks. I used the link to buy a new switch unit and fitted it fine... But now the car is immobilized. Is there some work around I need to get it running again? Thanks

[@warrenwilliams5337]

Hi Brendan. Did you manage to find out why your car was immobilized after fitting the new part? I am about to replace my comms unit and wondering if the new one needs to be programmed to my vehicle?

[@brendanscottage]

@@warrenwilliams5337 haven't figured out out yet unfortunately. Turned out I didn't need the new unit at all😱

[@warrenwilliams5337]

@@brendanscottage thanks for responding. May I know what your original issue was that made you change the comms unit? Was it anything related to the steering angle sensor at all (mine is)?

[@brendanscottage]

No, it was intermittent failing lights, the forums suggested it must be the comms unit so I bought one, but it turned out to be dumb connector faults. So I spent money on nothing🙄

[@miikahil]

So how did you solve intermittent failing lights@@brendanscottage?

[@Papaj995]

Thanku you😊

[@kimjensen3909]

If i have a Peugeot 407 sw from 2006, and a Peugeot 407 sw from 2007 can i take the one from the 2006 model and put it in the 2007 model without havind to get it reporgrammed to use the crusecontrol?

[@charliechimples]

Great video? Thanks for sharing

[@UseTool_EN]

Hi @charliechimples ! My pleasure, I hope the operation went well 👌

[@noureddinedz6822]

Perfect

[@asmirpiknjac638]

On this video you first have Delphi,and next you get DAV,how you complete that because not same schedule of connectors,brow black and grey,because i try that and car not work,i have DAV and Delphi not work on my car,i dont know why?

[@mikevanhek6740]

If i want to change only the blinker indicator do I need to remove completely the steeringwheelcolumn?

[@Pi3flavour]

I think so. I have the same issue and it seems you need to disassemble the steering wheel and take the whole segment out.

[@recepkaya5860]

Bonjour, j'ai déjà nettoyé le boitier papillon de mon véhicule essence peugeot 307, mais il y a eu un problème, le ralenti en gpl monte tout seul, 1500 tr/min vient tout seul, ça arrive quand il est au ralenti, ça n'arrive pas avec l'essence , il diminue progressivement lorsque l'on appuie sur le papillon, faut-il s'adapter au boîtier papillon ? Merci pour les informations que vous fournissez.

[@recepkaya5860]

Good day, I cleaned the throttle body of my peugeot 307 petrol vehicle before, but there was a problem, the idling in lpg rises by itself, 1500 rpm comes on its own, it happens when it is idle, it does not happen with gasoline, it gradually decreases when the throttle is pressed, is it necessary to adapt to the throttle body? Thank you for the information you provide.

[@jupstejuho]

No, you need to clean the connector of the gas pedal :) or change new gas pedal.

[@JW-cq4ez]

And check the steering slip ring position if you buy used one. You're welcome😅

[@grahamwishart4832]

33 Nm for steering wheel bolt!

[@larsstrandh3748]

50 Nm

[@grahamwishart4832]

​@@larsstrandh3748Incorrect figure. 33 Nm is the figure given in Technical Service guides. More than tight enough!