How to replace the front shock absorbers Peugeot 3008 mk1 ➿

BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈
📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱
⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎
🛠📏⚙ FIND ALL THE PARTS AND TOOLS NEEDED AND RECOMMENDED BY USETOOL EN ⚙📏🛠
Needed parts:
- Suspension strut support bearing : maclede12.co/suspension-strut...
- Shock absorber : maclede12.co/3AzCfH2 and maclede12.co/shock-absorber31...
- Penetrating oil
- Copper grease : bit.ly/coppergreaseen
Discover a vast array of services that will help you run the maintenance of your car: vehicle user manuals, maintenance planning and mechanics-oriented tutorials!
Front shock absorbers on a Peugeot 3008 mk1.
Discover the world of UseTool EN on
Needed tools:
-💣🤖🏆The complete toolbox recommended by UseTool ES to repair your 3008 1 : maclede12.co/toolboxCLASOS3050en 🏆🤖💣
- 18mm spanner
- Socket wrench
- Wheel lug wrench
- Torque wrench : maclede12.co/torquewrenchCLAS..., maclede12.co/torquewrenchCLAS..., maclede12.co/torquewrenchCLAS...
- 13mm socket
- 18mm socket
- T-handle wrench
- 7mm Allen socket
- Wire brush
- Spring compressor : maclede12.co/springcompressor...
- Shock absorber head removal kit : maclede12.co/shockabsorberhea...
- Impact wrench
- Wiper arm Puller
- Adhesive tape
- Torx T30 socket
- 21mm Offset wrench
🔝💪Safely lift your 3008 1 with the hydraulic jack: maclede12.co/jackCLASOH5304en and axle stands: maclede12.co/standsCLASOM3030en recommended by UseTool EN 💪🔝
- Hydraulic jack
- Wooden peg
- Axle stand
🚗📢💡 RESOURCES 💡📢🚗
Usetool's warnings
- We advise never replacing just one shock absorber, to make sure you drive we the most balanced vehicle possible.
- Be careful during the spring compression stage, it may be risky and requires careful attention. Fix the tool in a vice, this will make it easier to use.
Usetool's infos
- During this operation, you will work on the steering system of your car.
- When you change the shock absorbers in your vehicle, you should carry out a tyre alignment.
📽❤️🚨 USEFUL VIDEOS 🚨❤️📽
- [ USETOOL'S TIPS & TRICKS ] Lifting your vehicle safely : • How to (PROPERLY) lift...
- [ USETOOL'S TIPS & TRICKS ] Removing and reinstalling a wheel : • ASTUCE : Pneu crevé ? ...
- How to replace the sway bar links Peugeot 3008 mk1 🚗 : • How to replace the swa...
Space Race by tubebackr | / tubebackr
Music promoted by www.free-stock-music.com
Terms and conditions of the offer : www.mister-auto.co.uk/operati...
Disclaimer: This video was created for information purposes and does not guarantee the outcome of actions undertaken.
To ensure that you see the best results, we recommend getting in contact with qualified technicians who will carry out the installation.
This video provides tips and recommendations that can be useful when repairing or changing parts. MCD12 and its partners cannot be held responsible for any physical and material damage that comes from the poor installation or incorrect interpretation of the video content.
This video was created for information purposes and does not guarantee any outcomes. The user is solely responsible for the incorrect use of repair machines, tools and parts, in particular if these may cause physical damage. MCD12 and its partners recommend taking great care and carefully following the safety rules when carrying out the repair or replacement of any parts. Please keep in mind that using poor quality parts compromises the safety of the driver when on the road.
0:00 Intro
0:15 Remove the shock absorber
4:53 Set the new shock absorber up
8:10 Replace the shock absorber

[@UseTool_EN]

BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈 📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱 ⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎

[@Letdpoorbreathe]

Thanks a lot. This was useful

[@jahmezdafellon2074]

Great video! All it's missing is the torque settings to use.

[@Polibon59]

Excellent tutorial, this is the only video I have seen which covers this operation thoroughly.

[@UseTool_EN]

Hi @Polibon59! We're glad we could help you out. I hope the operation went well 👌

[@larsh.alhaug1771]

Very descriptive ❤

[@flasheart49]

It's a good idea to mark the wiper arms before removing as they are handed. I really don't like the annoying music.