Using Arduino Nano to Flash Firmware and Setting The Custom ESC

Arduino Nano must be programmed using blheli32 suite as 1 wire interface.
Download ESC Config Tool v1.8
drive.google.com/file/d/1qw2f...

[@kakaworu]

This video did not show how to flash a BL32 ESC into AM32, am I right? Is there any tutorial for that? Thanks.

[@handphee5323]

pak saya mau bertanya perihal esc saya yang bermasalah, saya punya esc DYS ARIA 70a sudah saya flash firmware flycolor 1.80 untuk dipasangkan dengan motor rhino 2250kv ,tapi setelah berhasil flash kondisi esc sangat panas dan cut off, bisakah esc saya diatur ulang agar tidak cut off dan panas ? terimakasih

[@ackbarboypratama1277]

Apakah bisa untuk BLHeli_S paman ?

[@anthonyaviles8665]

How reliable are these escs

[@sarip79yt72]

Salam saya. Nk tnye, saya ada beli arduino uno type C, esc blheli dys 70A aria 3s/6s utk saya pakai kt crawler, motor outruner 2050 KV surpass hobby, saya dah try ikut mcmne yg di tunjuk kan, kpnpe keluar Com 11, bila conect boleh tpi x ada respon membisu,...? atau saya kene download file lain. Kene fail rujukan ke terimakasih 👍

[@GumballRoblox]

you have to flash am32 first

[@ValerianMason]

Hi, I have exactly the same hardware as yours (Ubec, Emax45A & NanoV3ATmega328P). However, I have a problem, in Multi ESC tool 1.82, I can't connect to ESC when I press the M1 button, the software says: "M1: Did not connect" Have you ever had this problem? If yes, can you help me?

[@Mo_OMi]

hey, do u fix it?

[@ValerianMason]

@@Mo_OMi I've still not connect to M1. but i tried to config it on the helisuite. It's worked well. However, I don't know the reason why it can not to connect via ESC tool.

[@ithaajja5724]

i have HAKRC_32bit 35A, but the chip is AT32F421K8U7, is there posible to flash it to am32?

[@pelurusilver]

nope at the moment

[@bananarecargado]

my question is, is it an esc that comes with blheli 32, did you have to flash to install am32? or there is already an esc that comes with am32 firmware and just connect with arduino and start programming

[@pelurusilver]

It need to be flashed

[@hobbykububut_utan9529]

Assalamualaikum paman...tutorial flash mcu e230 skystar esc paman....terimakasih🙏🙏🙏

[@pelurusilver]

wassalam.lihat di am32 github. semua informasi ada di sana ya

[@hobbykububut_utan9529]

@@pelurusilver terima kasih paman...🙏🙏