Using RGB FUSION 2.0 from Gigabyte for Motherboard RGB Control - Overview

[@allanshpeley4284]

This has to be the worst pile of trash software I've ever used in my life. How a company as big as Gigabyte can stand behind this is truly astonishing.

[@aidenguex1041]

Agreed. MSI mystic light is leagues better

[@Pokerbum225]

Facts it’s absolute garbage

[@Oiak1086]

@@aidenguex1041 just bought an B650 Aorus Elite and I can't interact whit the software, I miss my Mystic light already!

Great software. Be careful what you say online because someone who works for gigabyte might see this

[@jit_x]

@@aidenguex1041 I was actually confused on a gigabyte eagle AX and a MSI B650-S... I mean the gigabyte looks good but the software is trash... gotta go with MSI

[@cryptodolla]

I built two personal PC's 15 years ago using Gigabyte Motherboards still working great however can't use Windows 11 so I just started a new build.. Gigabyte Z590 Vision G. Gigabyte 4Life!

[@CompletedGamesOfficial]

I just got the B450 Elite after bricking my older motherboard B350 F-Gaming and I really like the RGB in this one the other one you couldn’t do anything and it just breathed at night.

[@Emil_m]

Thanks for your review. I’m primarily interested in just setting one color, glad it’s possible through bios (without running software). Probably gonna set it to dark red/orange to get the feel of something glowing inside ;)

[@PapaMav]

Thank you. Great tutorial.

[@3Gads]

The Gigabyte Control Center freezes up my B650M DS3H motherboard after about 10 minutes of usage. Stops all USB drives, GPU, and all fans except for the CPU fan and RGB lights (though it does freeze the RGB light patterns in place). Had to uninstall the program. It's a shame though since it lets you mess with clocking, fans, voltage, etc. outside of the BIOS.

[@1elkasjasdfkjhk12h38k]

Amazing video Thanks!

[@SofaKingA]

Judging by the comments, did I make a mistake buying a Gigabyte board?

[@nirobahmed3719]

Same bruh

[@thealien_ali3382]

Asus has gone down the poop hole, awful quality, really poor customer service. Armoury crate is so bad it's literally a virus. This is way better. I moved to gigabyte from asus

[@SofaKingA]

@@thealien_ali3382 I posted this over a year ago and my Gigabyte has performed flawlessly. 👍

[@azarr04]

thanks 👍

[@napoficial7123]

Thank you very much 😊

[@aintmucho5257]

My mother is H410M and has 4pin RGB header how to connect most sync cable have 3 pin connect only

[@TTURKI]

I was using Kingston RAM and the rgb sync was a no problem and it’s different with corsair , so after reading some comments it happened to be problem from the ram that unable to sync it kinda “force” you to use there software

[@snadtek6673]

Please provide steps to create a "Favorite Color". Thanks!

[@kenny75photography2]

I wondered if the brightness could be optimised as at full brightness the rgb light is pretty dim on fusion.

[@KUWAMBO]

i uninstalled rgb fusion 2.0 because the cpu fan was stuck in one color and i couldnt change to certain color pattern. i then redownloaded the software but my gpu is not being detected anymore. what should I do?

[@ProManirule]

Try putting your computer in "sleep" mode with the app open. Then turn it back on again and it should detect again. I had the same issue and this worked for me

[@erikmeza5074]

@@ProManiruledidn’t work for me

[@flacko001]

Were you able to fix it ?

[@zizimugen4470]

So I’ve got a B450 Aorus M, with Corsair Vengeance RGB ram that doesn’t get recognized by rug fusion. Neither do the three Antec F12 RGB fans I just installed. The fans will spin, but the lights don’t turn on, and I can’t do anything to my ram’s colors.

[@Diabloke2701]

great vid ! What psu is that ?

[@KlausIsBored]

ur a life saver

[@Dogboy73]

RGB Fusion 2.0 suddenly stopped working for me, it’s only detecting my GFX card. Nothing else. Tried uninstalling, downloading latest version, re-installing. Same thing. Only gfx card shows in RGB Fusion. Was working fine up until today. No idea what has happened.

[@mohamedamer4469]

thank you for review but RGB FUSION 2.0 boring im uninstall it and using signal rgb

[@HardwareArtisan]

Thanks Mohamed Amer, I can't completely disagree with you, you make a valid point! Thanks for watching!

[@patrickwillson7282]

Signal is fantastic! But the only problem is very high cpu usage 😞 23~27% on my i5 11400f. Any work around??

[@delivp]

​@@patrickwillson7282 Open rgb is simply but good.

[@stkstikle]

How did you hook it up to your motherboard? The controller that I have has a 4 pin and then a 3 pin with only one wire. I have a B450M

[@BG-iu1mv]

My gigabyte control centre doesn't detect my Corsair ram. Do I need the RGB fushion app ?

[@mh73672]

fixed? i have same problem

[@diebygaming8015]

Video doesnt work for me, my device doesnt show up in RGB fusion, and after installing GCC my audio sounds distorted, help?

[@jacobjordan760]

I run a B550 UD AC and I’m trying to change my stock cooling RGB fans and just can’t figure it out. The gigabyte RGB app kinda sucks

[@princecodmmm]

Please Reply! how to startup on boot?

[@princecodmmm]

nvm i found it

[@Jeffmd2020]

I’m in the process of building an all white PC with the gigabyte X670E Aorus proX motherboard since it’s all white including the board and I’m using the thermaltake swafans that are magnetic with 1 cable. My question is, if the fans ARGB won’t run just off the motherboard organically or without a controller if I have to download this software will it constantly run in the background while gaming and cause performance and FPS issues? If so then I’ll just have to find a different set of fans that WILL run off just the motherboard with color changing options

[@jacobjordan760]

See my stock fans in my prebuilt won’t change colors in the fusion app they just stay in the stock rainbow color which sucks cause I’ve upgraded my cpu cooler and ram so I can control all those RGBs but can’t control my stock fans

[@KindOfBland55]

my rgb fusion just shows the outline of a motherboard with the apply and reset buttons grayed out. does this mean my motherboard doesnt support it?

[@jschau11]

I bought a new computer with this RGB fusion preinstalled. It seems like it updates every two days, takes many hours to install, and by the time it does, there is a new update within a few hours. The update takes over the entire machine, different programs stop and start, computer restarts a few times, etc. The update process jacks up everything. I hate this program and don't want to even update any more it's such a hassle. Now, I have had an open screen on my desktop that just churns for over a week now (Signal RGB One for all) with the message "Creating Core." What is this and how do I make it stop? So annoying. Can't it just go ahead and create the core and finish? Can I safely uninstall it?

[@sarva1403]

Anyone knows how the software was able to natively recognize and control the Corsair RAM? Wasn't it supposed to only be controlled via iCue?

[@gandalfthewhite2809]

which is better to use qorus qpp center or gigqbyte control center

[@jeanneosecour]

my ddr4 vengeance rgb is not detected in rgb fusion, do you know why?

[@zezoo9143]

please can some one help me i apply the rgb i want in digital led but after restarting or turn off the pc and on it back to the static mode or if i back to sync mode it also back to static mode how can i apllay it for ever??

[@Josssssssssse]

me too i gotta this same case HELP

[@shazam2323]

the standalone link is missing? I just got a 4080 and after installing the control center it's f'd my ram...2 sticks now don't light up at all and nothing is fixing it...also does not show my aorus motherboard...

[@jivepsilocybe993]

Trying to find out infor on the aorus b650 and what argb fans are compatible and im finding absolutely no information besides pins. I really dont want to waste money on fans i cant use or i cant change color on.

[@joshobrien7708]

this video didnt really help me, still cant sync my corsair vengence ram, so anoying. seriously thinking of replacing with non rgb ram.

[@BrenoLeoni]

Hello, good evening, is there any way to synchronize the LEDs on the video card and the Gigabyte B450M Gaming motherboard? My motherboard does not have the digital LED_C1, only fixed colors, if not, which is most likely, is there a controller that makes this synchronization?

[@killaclutch4208]

I have a aorus rtx 3080 extreme and 95% of the time rgb fusion 2.0 will not detect the gpu so I then need to leave rgb fusion 2.0 open then put the pc to sleep for a few mins when waking up the pc once in a while the software will detect the gpu other times the pc will bsod with a pfn list error

[@gameotic1]

I've B660M Aorus Pro AX and Corsair vengeance pro RGB ram and 6 fans(supports aRGB) connected to aRGB header in the motherboard but software only showing motherboard. Not ram and and not changing fan colors what's wrong with that?

[@islandmanliming]

I have color cycles selected for my rgb zones on my z390 master but it keeps going back to one color

[@chinogaming2022]

my rgbu fusion 2.0 doesnt open :( any issues with yours?

[@chinogaming2022]

mine says the type initializer for ‘LedLib2.LogFile’ thew an exception

[@lija7934]

I have b660m gaming motherboard It's have rgb fusion 2.0 but when i control with this app itit’s not showed which i added.

[@aryajayasuper]

This fusion is work for 12v 4 pin rgb header?

[@zitrone4566]

Mine didnt find anything...

[@freddychenkual7921]

My b550m ds3h mobo cant open rgb fusion,I have an argb xpg ram...

[@richardcardoso54]

I have a z690 Aorus Elite AX DdR4 but the rgb fusion 2.0 won’t detect my Ram so I can change the color but the ram is working I checked it already and it’s running fin but the program isn’t detecting it any idea as to what I should do?

[@itoznachoz]

somehow my corsair RGB cant be detected. help

[@dennisvanderwouden7072]

hey somone help. my rgb fusion 2.0 isnt detecting my ram anymore. somone knows why?

[@IvoryMonsterXD]

I'm trying to edit the RGB settings from the bios, but I don't have the option for RGB Fusion. Does anyone know if/how I can get it?

[@BrenoLeoni]

sua placa mãe é AM4 Gigabyte? se sim, creio que tenham essa opção, a minha é uma B450M Gaming e tem

[@Wildmutationblu]

I have the ga-z270x-gaming-k5 motherboard and according to the motherboard manual, the LED header is 12v. I have just bought 5v RGB fans but I'm too scared to plug them into the header. I would appreciate your advise.

[@freddychenkual7921]

Dont plug 5v to 12v,this 12v is for led strip if it indicates led on the header

[@Pacha_Antares]

i can't even get any of them to download?

[@HardwareArtisan]

Hi Pacha_Antares, Try going to your motherboard's product page, it should be available there. Also, you should be able to install it through Control Center. Install that first and then you can install RGB fusion from within that application. Are you having some other issue with it?

[@mh73672]

Mine doesnt detect anything? i have ram sticks from corsair and some fans

[@HardwareArtisan]

If you haven't already, check out this video I made specifically regarding the Corsair RAM, it's problematic at best...haha. kzbin.info/www/bejne/oKvQen18m7GhaKM As for the fans, i'm assuming you have them connected to an RGB header on the motherboard, it may not 'detect' the fans, more simply, you would just control the port on the motherboard. With that said, give me an idea of what fans you have and how it's connected and I will be happy to help the best I can. Thanks for watching!!!

[@sumonmdsumon5012]

Hey this work on Gigabyte B450 AORUS Elite V2 please reply

[@HardwareArtisan]

Hi sumonmdsumon5012! Yes! RGB Fusion 2.0 will work on the B450 Aorus Elite V2. Good Luck and Have fun with it, let me know if you have issues!! Thanks for watching!!

[@richardhubbard2151]

I will NEVER buy GB again. What a mess this board is.

[@HardwareArtisan]

Hi richardhubbard2151, I'm sorry to hear about that, I know that feeling though. I do like GB boards themselves, the software is very meh!!! Good luck and have fun!!!

[@erwingoncena6276]

Gigabyte b550m aorus elite can control rgb?

[@HardwareArtisan]

Hi erwingoncena6276....Yes! RGB fusion 2.0 will control the RGB headers, both 5v and 12v on this motherboard. Good luck and have fun, let me know if you need help!!

[@wildkev1010]

If your thinking about buying a Gigabyte mobo, DONT.. I regret getting mine

[@itea7097]

why?

[@itea7097]

I ve had an Aorus B450 Elite V2 for a year already no problema

[@NuclearOlive]

I have the z790 UD AC and uuuh, for the rgb fans that came with my case, I cannot swap to motherboard control. Or if I can, it's not working.

[@marthezemedia8523]

Been using my B550m S2H for about a year, not a single complaint since

[@revit4909]

What why? Mines been great

[@jacadiaunruly]

When i first got my PC, 4 days ago, i had the same two items showing in my RGB fusion that you have. Now when i go into the program its not showing the memory and those lights no longer change. I'm fairly new to PC's so i dont want to mess with anything. Any suggestions?

[@elcerditoxd4970]

Same problem here, did you find a solution?

[@jacadiaunruly]

@@elcerditoxd4970 I did. Honestly, it was something so silly. I opened up iCUE then all components showed up. I find it can be a little finicky, but iCUE seems to clear things up. To be honest, I've just been using that instead and so far everything works fine.

[@5agD1G]

This app works on jginyue b760m or only openrgb?

[@HardwareArtisan]

Hi 5agD1G, I do not know if this would work on a jginyue motherboard, all you could do is try it and see if it detects it. I'm not sure there is any relationship between jginyue and gigabyte, so I'm assuming this wont work, but I could be wrong. You could try openrgb, not sure that board is on the supported list, but give it a shot, it's free. Let me know what you find!! Thanks for watching!!!

[@5agD1G]

@@HardwareArtisan I found something much simpler and more efficient - openrgb btfl

[@knxqDeontae]

Hi i have the gigabyte b550m ds3h and i dont know how to control my rbg for my exaust fan its connected to the sys fan1

[@delivp]

I have the same mobo and I use OpenRgb, it is a simply program but it works fine, and that usually works with any kind of device. So, I can change the colours of all my fans. You need to connect your fan to de 3 pines argb on your motherboard as well.

[@knxqDeontae]

@@delivp hi yes that was my problem most of my fans are connected to a fan hub and straight to the psu the other 2 are the cpu fan and rear exaust fan and that one is connected to sys_fan1 slot

[@sims_lyfe96]

I bought a PC tower that has three fans built in that are supposed to RBG however the button on the top of the case does not work. There is light to the fans however they just won't change. I pulled up the RBG Fusion that was installed on my PC and when I go to sync I don't see any lights other than what the fans are stuck on. I have checked all the wiring so many times and cannot figure out how to fix the issue. The only option that is shown in RBG Fusion is the CPU... the fans aren't showing.

[@goochiemonster]

Did your case come with a rgb controller? you have to connect your fan connector to the controller and the rgb controller to your motherboard

[@sammygamingchannel5833]

I’m never buying a aorus motherboard did rma 3 times

[@HardwareArtisan]

Sorry to hear that!!! That sucks for sure. I've had good luck with Gigabyte Aorus Motherboards, but there are so many models and versions it's possible to find some bad ones. I wish you luck with your replacement!!! Thanks for watching!!!

[@Wmixer]

i got the b550 gaming x v2 and cant get the mobo rgb to work any ideas??

[@xmanuu]

same for me :(

[@delivp]

Yes, you can use the OpenRgb program. That works for me.

[@abuzerkadayf1500]

Returned all my Aorus products thanks to RGB Fusion, never works & causes blue screens , total crap.

[@kungfury6410]

RGB fusion is such a garbage software. Its a crap shoot if it will work properly.

[@danw3735]

what a complete mess of software, uselesss.

[@HardwareArtisan]

Hi Dan W, I can't completely disagree with that statement! Thanks for watching!!!