7 ай бұрын
11 ай бұрын
Пікірлер
@LotusFlower0502 2 сағат бұрын
Does flipping it horizontal like this change the cpu and gpu temps while gaming? I’m having issues with mine vertical and with cooling and was wondering if flipping it horizontal would help with temps
@Jakiaoyiyi 2 күн бұрын
Great video, but I was expecting a guide through the case. that would have been super helpful.
@cooladi002 3 күн бұрын
can the lights on the center ring be switched off ? so only the outer ring glows... ??
@filifill3925 3 күн бұрын
Добрый день. При сборке в этом корпусе у меня возникла проблема. Я смог подключить только в 2 из 4 внешних юизби 3.0 портов. Моя материнская плата MSI MPG B650 EDGE WIFI DDR5. На ней не хватило портов. Можно как решить данную проблему ?
@timzim9314 3 күн бұрын
Wish they didn't have a logo on the mirror......
@HardwareArtisan 3 күн бұрын
Yea, I totally understand that, I can't disagree! Thanks for watching!
@MS-xj1yu 3 күн бұрын
For some reason when i update armoury and its about to finish it fails saying that my windows is busy so it doesn't complete the update install...also just so i know whats the basic installs i should choose for it i have a..... TUFF Gaming B650-E wifi.......also wifi doesn't show up on my computer only can connect through Ethernet cable which is fine but also sucks
@ejosephsimon 4 күн бұрын
For anyone wanting to use the Corsair Commander core XT & a corsair fan RGB hub or lighting node pro. IF you are NOT using Corsair components it will not work, example i have 7 LianLi uni-fans GPU & CPU water block also a 24 pin strimmer,& distro plate all with RGB, none of which are corsair, To get all my non corsair component's to work & be able to achieve individual control over ever components i had to purchase 2 Corsair Commander Core XT controllers, Then eve43rthing worked fine with signal RGB & IQUE. Don't waste your time & money if your not using all corsair components...trust me...
@lambition 4 күн бұрын
Is this different on some Corsair fans? I have Corsair ML120 Pro RGB, but this doesn't work. Could be defective fan, but I have no way to test this since I don't have Corsair Lighting Node.
@Cherub72 4 күн бұрын
I would be afraid of their software spying
@joshzard1234 4 күн бұрын
Dose this work with corsiar rs120 ARGB fans im looking for something like this
@HardwareArtisan 4 күн бұрын
Hi joshzard1234, the rs120 fans use a standard 3 pin 5v argb connection for lighting. The CoreXt doesn't use this type of connection. However, you can connect the PWM connection to a core XT, and, you can adapt the 4 pin argb port on the core XT to 3 pin argb, I did a video on that, it requires adapter cables to work. That's a good question, thanks for watching!!
@Rothy956 4 күн бұрын
Have a Matcha Green 600 arriving in a week. Counting the days!!
@HardwareArtisan 4 күн бұрын
That's awesome! It's a cool case for sure! Have fun with the build, thanks for watching!!
@TOMMY00754 4 күн бұрын
The ssd brackets suck so much, the bolts just don't unscrew easily and it's a total mess.
@Sypher-rm3rw 5 күн бұрын
I want to be able to change each individual rgb fans on my pc but I don’t see my fans in my msi center
@PaulHolloway-y9s 5 күн бұрын
Love the case, gunna do a water cooled build just for fun. How long is your riser cable? For front mounting the gpu? Many thanks
@HardwareArtisan 4 күн бұрын
Hi PaulHolloway-y9s, this particular cable is 25cm in length. It is a great case, good luck with the build and thanks for watching!
@JigZor 5 күн бұрын
Built a 4090 - 7950x3d in the Tower 600. It's a little bit of a pain to build in, very tight clearance pending how your headers are set up on the board. Overall, I do enjoy how it looks though.
@HardwareArtisan 4 күн бұрын
Hi JigZor, it does look good, but I agree, a bit tight on that left side...thanks for watching!
@lucaargento9552 5 күн бұрын
i have to decide between swafan ex 12 argb and lian li sl120, in terms of flow, aestetics, performance, integration (at the end i wanna to connect fan, ezdiy strip led and corsair rgb vengeance pro all via AURA sync), to have same effect. What do you think? what's the better choice by your opinion? thanks
@AbortedRepublic 6 күн бұрын
LMAO! Just another POS app that looks and acts like it was made by an 8-year-old in a Chinese sweatshop. "Start At Login" does not work on my Windows 11 Pro. "Load Profile" in the settings does not work. Yet another fail from another programming flunky, to go with Dynamic Lighting, LGHub, Razer Chroma, and, worst of all-time: Asrock's Polychrome. Now I've got 5 worthless apps. :/ Bought a mouse and keyboard with no lights, and stuck the PC in the closet. Never again with this ridiculous nonsense! How the hell hard is it???
@AbortedRepublic 6 күн бұрын
Unbelievable, I actually went back to Polychrome from this trash! I can at least get Poly to start with Windows. Just can't get it to start minimized and in the background. Total fail.
@matheusgomes6664 6 күн бұрын
It's Possible adapter psu atx?
@Walli182Katy4EVA1 6 күн бұрын
doesn't work for me, my 3 fans in the front are constantly lit up in rainbow colors no matter what I set them to
@yeZee. 6 күн бұрын
Hi will i be able to connect the power cable directly to the psu ? Because I’m out of pcie cables 😅…. If not could i plug it in in my pig tail pcie cable that im using for my gpu ? (The end of the cable that is not used by the gpu)
@dma.amd077 7 күн бұрын
Corsair, the company that doesn't provide any instructions or manuals for their product
@AaronMetallion 7 күн бұрын
As a UI / UX designer, this is a very simple yet clunky piece of software, while SignalRGB is on the other end of clunky... If I were to design OpenRGB I would've put on off switches for each device, or to be able to add or remove devices that you'd like the software to control. It's really not intuitive... It detects my keyboard as the wrong device being an unknown brand, and I'd like to use it's original software, but OpenRGB doesn't seem to have any straight forward way to turn off control..
@causerDAguv 8 күн бұрын
I use Noctua fans. If I don't care about induvial fan control couldn't I just use a fan splitter? Like for my 3x 140mm front fans, obviously they should all be going the same speed so it wouldn't be much of an issue if I use a splitter?
@aboothahiru6354 8 күн бұрын
AntEsport sx3 cabinet comes with argb light and rear mounted argh fan , These argb s can be controlled via reset switch(which is conncted to the hub (which is hidden)) but after using Mysctic light to control argb which worked fine but after turned off mystic light ,reset switch does not control the argb
@jasonOfTheHills 8 күн бұрын
Great, informative video. Is it just me, or is this (and the previous version) software REALLY bad? It is rare when it works correctly. I do have an older system to be fair, but still. Man I have had so many problems with this that I wish I had gone with a different company.
@palaHD 8 күн бұрын
That's how you do a case review
@HardwareArtisan 4 күн бұрын
Thanks palaHD, I'm happy you found the video helpful, thanks for watching!!!
@michael-c7x2e 8 күн бұрын
Can someone help me there is no option balance mode on icue it only shows options
@e36boy 8 күн бұрын
I really am looking forward to buy this case. I want this in particular is because of the specific space I am putting it in. I need something more vertical.
9 күн бұрын
Corsair is so frustrating. Good luck getting all that garbage into your case
@CMan-602 9 күн бұрын
Wish more people would provide this clarity when reviewing/building. I am preparing to use this case in Matcha Green with Project Zero & 9800x3d. Well done sir.
@gerardgauthier4876 10 күн бұрын
Corsair! Please hire this guy.
@renDegade 10 күн бұрын
can someone please let me know how do u get those colors at 13:06 for LX120 Fan how do u combine them, if someone can give me the exact colors, i see its like light blue/white and pink i think
@coldfirebeat4903 10 күн бұрын
my mobo is B450 Pro Wifi.. how can i make it works? i dont see it on the list
@Ryszykow 10 күн бұрын
I think most do not take the time to learn how to use IQue. The multiple layers allows you to do almost anything you want. aside from the reassembling effect that was demonstrated i did not see anything I could not do in IQue
@sshirali 10 күн бұрын
Thanks for the video. Lots of good info. I have two questions 1) Does the black version have a darker tint on the glass than the white version? 2) You mentioned you recommend keeping the top filter on even if installing an exhaust fan there. Curious on why you recommend that.
@Rogi269 11 күн бұрын
Hello thanks! What cable do i need for the rgb connection on my motherboard for the RGBpx Splitty4? Its 4 pins RGB. Thanks and cheers..
@TheRealSamard 11 күн бұрын
How about this for the i7 14700 non K? Is it an upgrade from stock cooler?
@sofieneouni6085 12 күн бұрын
Great explanation! But two more thing if we want to plug or unplug cables in motherboard how to do ? Also are antenna wifi in PZ fit with this case ? Thnks a lot 🙏
@JeraroGames 12 күн бұрын
I bought the Corsair watercooler that comes with one of these Commander XTs, but the total number of RGB coolers I want to connect is 10. Can I buy another Commander XT and everything be ok? Will I be able to control the speed of all 10 and the RGB of all 10 with the 2 Commander XTs connected?
@Janisku7 12 күн бұрын
would be great to have bigger case with dual Systems setup as well also the diagonal way to add some cooling brackets
@samuelweigert2957 13 күн бұрын
Benn ages since the last video nice to see you back
@keanetova6938 13 күн бұрын
Love how thorough you are taking it apart. I appreciate you pointing out how these two cases do share some parts, definitely opens up some options for customizing your case further.
@thecowewsASMR-ig7xq 13 күн бұрын
Hey I love the software and looks amazing but not one of components are compatible
@khaledvany 13 күн бұрын
Great explanatory video thanks 👌👌👍👍
@Wes-mv9zj 13 күн бұрын
thank you. this was very helpful before buying that exact combo.
@HardwareArtisan 13 күн бұрын
HI Wes-mv9z, I'm happy you found the video helpful! Good Luck with the build and have fun, thanks for watching!!!
@chris99103 13 күн бұрын
Many thanks, really a lifesaver guide on how to go about Corsair fan and control installation. KZbin is becoming the new "Library of Alexandria" to concentrate and preserve knowledge.
@HardwareArtisan 13 күн бұрын
Thanks chris99103, I'm happy you found the video helpful! I totally agree on the "Libray of Alexandria" take....Awesome stuff. Good Luck and have fun!!! Thanks for watching!
@Drifter215 13 күн бұрын
So u need to use a hub no matter what fans u use then ?
@HardwareArtisan 13 күн бұрын
Hi Drifter215, If you use the "RGB" Version of the swafan, it comes with a HUB and is required. If you choose the ARGB Sync, technically a hub isn't required and you can connect the RGB connector directly to your motherboard. However, this isn't really practical as you're likely going to install 6-12 fans and you won't have 6-12 rgb connectors on your motherboard, nor would that look very good. In that case, yes, buy an inexpensive ARGB hub. You can feed an RGB signal from your motherboard to the single HUB and then connect all your fans to the HUB, it will simply the installation. I hope that helps explain it. Good Luck, have fun and thanks for watching!!!
@Drifter215 12 күн бұрын
@@HardwareArtisan yea i have the sync ver but seems to not work on my asus mb idky
@1gamerdad287 14 күн бұрын
How many of these fans RGB connectors can be daisy chained into one mb argb header?
@HardwareArtisan 13 күн бұрын
Hi 1gamerdad287, the documentation for the d30-120 fans shows limiting your setup to chaining up to 4 fans together. That would be one limitation, so 4 fans per ARGB header. Your ARGB header can likely support more than that, but I wouldn't chain more than 4 together. In addition, you have to consider how much power your PWM connector will support as well. You may likely have more than 1 ARGB/PWM connector on your motherboard to allow for more fans. If not, or it's not practical, I'd consider using an ARGB/PWM HUB powered by a SATA power connector, this would expand a single ARGB/PWM port to allow for more fans and make it easier to manage. In any case, I'd still not chain more than 4 together Good Luck, have fun and thanks for watching!!!
@1gamerdad287 13 күн бұрын
@HardwareArtisan thanks for the response! I think I was going to hold it to Max 4 for RGB and Max three for fan connections. I have a 3+1 configuration so I'm going to plug three into pwm and the separate one into it's own pwm then daisy chain 4 into an aRGB header. That's what I think I'm going to do anyways lol
@smamas114 14 күн бұрын
They didn't heard about reverse blade , like lian li 😏😏.....i think lian li are better looking now ....i have ql fans ram mouse keyboard from corsair and its too expensive to change all that just to replace fans ....
@HardwareArtisan 13 күн бұрын
Hi smamas114, I agree, I wouldn't remove QL fans to move to these fans. And, currently i'm not aware of any corsair fans having a reverse blade option, but it would be welcomed. Quite a few other fans do offer a reversed version, or fans like SWAFAN EX 120 come with both sets of blades so you can decide what you want. Keep on rockin those QL fans, they look good. Have fun and thanks for watching!!!
@LookItsDev 10 күн бұрын
@@HardwareArtisan Literally one day later they announced Lx reverse blade fans haha
@hollisellis8609 15 күн бұрын
My controller pro node is showing up in software updates in icue but not on devices?
@HardwareArtisan 13 күн бұрын
HI hollisellis8609, I would make sure to apply any firmware updates that the software is showing for your controller. In addition to that, make sure to update to the latest version of icue. If it will doesn't detect it, uninstall/reinstall icue. In some cases, i've had to physically remove a device from power and USB with the power off and then reconnect it. If it still isn't detected, try a different usb header and make sure your chipset drivers are up to date and other usb devices are recognized. Beyond that, there are other windows issues that could contribute. You may want to reach out to corsair and provide them the logs from icue. Good luck and have fun (troubleshooting is fun, isn't it). Thanks for watching!!!