Using the Fluke 190-502 Scopemeter to measure electrical noise

  Рет қаралды 75,555

Design World

Design World

Күн бұрын

Пікірлер: 19
@felixautotech4754
@felixautotech4754 2 жыл бұрын
Question Can I use this osilpscope on cars
@JaykeSapalaran-iq3qs
@JaykeSapalaran-iq3qs Жыл бұрын
Great video information 👍❤ thank you for sharing your knowledge and experience 🇵🇭🫡
@criticalw88
@criticalw88 5 жыл бұрын
Is it better than Tektronix’ THS3014 (excluding the additional 2 channels)?
@mikeadler434
@mikeadler434 2 жыл бұрын
👍👍
@AlainHubert
@AlainHubert 7 жыл бұрын
That is some really antiquated and sluggish LCD display, with way too much persistence, on such an expensive product.
@kakureru
@kakureru 6 жыл бұрын
most scopes are that slow when triggering on that few 60hz waves
@lonewolftech
@lonewolftech Жыл бұрын
It’s not a damn bench scope…. This isn’t made for your fancy bullshit this is for real pros who have to use them daily in the field.
@LyleVertigo
@LyleVertigo 9 жыл бұрын
Over 4 grand? Jesus christ that's expensive!
@adisharr
@adisharr 6 жыл бұрын
It's a 500MHz scope. You're paying for the analog bandwidth.
@lonewolftech
@lonewolftech Жыл бұрын
It’s one of the best if not the best scopemeter in the industry. However if you’re not in industrial they’re pretty much pointless to a normal scope.
@stefanogarani56
@stefanogarani56 5 жыл бұрын
Interessante, molto
@photronsardarkling2064
@photronsardarkling2064 3 жыл бұрын
A scope doesn't have the sensitivity to display electrical noise especially when most of it is in the RF domain
@lonewolftech
@lonewolftech Жыл бұрын
You know nothing of the industrial world or scopemeters then 😂😂😂 because it’s what we use them for in industry!
@photronsardarkling2064
@photronsardarkling2064 Жыл бұрын
@@lonewolftech *"... You know nothing of the industrial world or scopemeters..."* You reckon? Ok, so on my spectrum analyser I can see neg 20dBmv of electrical noise at 30Mhz which is approximately 100 micro volts . This electrical noise has destroyed the SNR and causing serious impairments to the communication channel. Are you seriously trying to tell me you can see that on a Fluke scope meter that has a sensitivity of 2mv per division? My spectrum analyser can see down to neg 50dBmv how far down can your scope see 🤣🤣🤣🤣
@Impedancenetwork
@Impedancenetwork 4 жыл бұрын
Jesus Christ I don't think this guy can spell Hertz. This is terrible.
@lonewolftech
@lonewolftech Жыл бұрын
Jesus Christ another asshole who shouldn’t be allowed online.
Using the Fluke 190-502 Scopemeter
5:54
Design World
Рет қаралды 12 М.
Portable Oscilloscope Webinar Series Part 1: Basic Theory
16:26
Fluke Corporation
Рет қаралды 3,3 М.
ROSÉ & Bruno Mars - APT. (Official Music Video)
02:54
ROSÉ
Рет қаралды 191 МЛН
Миллионер | 2 - серия
16:04
Million Show
Рет қаралды 1,8 МЛН
Wait for it 😂
00:19
ILYA BORZOV
Рет қаралды 6 МЛН
Я сделала самое маленькое в мире мороженое!
00:43
How to use a multimeter like a pro, the ultimate guide
12:55
James Gatlin
Рет қаралды 2,3 МЛН
Ремонт переносного осциллографа Fluke
21:59
Рецепты по электронике
Рет қаралды 5 М.
Oscilloscope Safety - How to use your scope safely!
12:52
HTM Workshop
Рет қаралды 60 М.
ПОЧЕМУ МУЛЬТИМЕТРЫ FLUKE (USA) ТАКИЕ ДОРОГИЕ? СТОИТ ЛИ ПЕРЕПЛАЧИВАТЬ ЗА БРЕНД?
15:44
BSL008 Fluke 125 Industrial ScopeMeter
8:08
Black Sheep Logic
Рет қаралды 86 М.
How to Use an Oscilloscope
12:32
SparkFun Electronics
Рет қаралды 1,1 МЛН
How to measure mains voltage with a bench oscilloscope safely.
11:26
Measuring Mains Voltage with Oscilloscopes
19:45
John Ward (jwflame)
Рет қаралды 65 М.
ROSÉ & Bruno Mars - APT. (Official Music Video)
02:54
ROSÉ
Рет қаралды 191 МЛН