Using the Happizza Button Maker & Review!

Using the Happizza Button Maker & Review!
32mm 1.25 inch button pin badge maker
wanted to post a video for anyone else who wanted to see how this looked or worked etc
:)
if you liked the video feel free to like and comment but id prefer if you didnt subscribe 😅

[@mirakei]

sorry if you’re getting ads, i didn’t put them there and i’m not getting any money for this video

[@xyboyzw]

yes i got 2 ads 😂

[@gaby1benavidez]

Since they are forcing add you might wan a look I to getting paid for it. Don't let them take advantage of you.

[@TheCraftyHalo]

I’m wondering where to find the circle cutter?

[@pj.2445]

@@TheCraftyHalothis is late so i hope it’s still relevant but w mine it came w the maker

[@TC-rv6sz]

This is an exceptionally good video in terms of filming, presentation, audio quality, everything. I love how well and thoroughly you documented your research and exploration trying to figure out how to align the pins!

[@alytleartsy]

I bought the same machine also on prime day... lol! I came to see if you had tips for lining up the pin backing as I have been experimenting and going through the same trials you showed in the video. Just tested your theory on the 45 degree angle and that worked great! Thank you! That circle cutter is crap! Get yourself a 1.75 inch circle punch. That will give you the extra 1/2 inch bleed for it to fold under in the machine to make the 1.25 inch button.

[@mirakei]

thank you for the comment! i’ll definitely look into buying a better circle punch!! i knew the one that the button machine came with wasn’t the best 🤣 glad to hear that i was able to help with the pin backing!!! annoying that it doesn’t line up properly in the first place but oh well !

[@julietrim1]

hey y’all, i just took a closer look on the picture side of the maker, there’s a small tick showing where the top of the design needs to point!! and then you put the backing straight. (this video helped a ton before i realized though!!!)

[@urLocalCozplayer]

a lil tip: if you’re having trouble with the cutting thingy use a pencil and the circle and draw a circle then just cut it out with scissors as careful as possible

[@user-qs8zg4fs5u]

I never comment on any video, but its 2am and ive been trying to figure this out for hours, and this video SAVED ME. THANK YOU!

[@MsPurplegirl12]

I love your passion in this video, that’s when you know you enjoy what you do💖💖 lots of love your way!🫶🏼

[@mirakei]

oh thank you for your comment!! it’s very sweet!!!!

[@nekochii911]

It might help to wrap the handle in a soft cloth to pad it out. Also thank you so much this review is super useful.

[@mirakei]

yeah i may try that!!!

[@melissarosenvall8898]

I just bought this machine because I wanted some buttons for my niece and they are so expensive! I would rather just have the machine on hand. 😅 I have to say this was a very well put together review and also entertaining. 😂

[@PrettyLitCo]

Just bought one and I thoroughly enjoyed this video 👏🏽 especially the don’t subscribe part 😂❤️ thank you this was very helpful

[@mirakei]

Hahaha thank you! 😂

[@gaby1benavidez]

I love videos that show the oops moments. Thank you for sharing

[@jungkookie4life]

best review ever tbh tysm

[@shelby3254]

Im having no problem when it comea to the paper but oncd i stamp the plastic theres always a piece not crimping

[@AshleeTuck]

I’ve been watching tutorials all day. I have the 3 size button maker that slides to put the pin together than twisting like yours. It’s super similar but mine keeps jamming or the plastic film does not stick to the button.

[@a-mart9955]

This video made me laugh lol 😂😂 you’re so funny. Thank you for your video ❤

[@juansalgado6212]

It made me laugh when were like “wahhhht” 🤣

[@saxenart]

Do I just use normal paper to print my art on and use for the pins or do I need to use thicker paper to make these pins?

[@kitchengun5099]

I wouldn’t recommend thick paper for these plastic machines. If you had a metal pin button maker, it would be better!

[@guitarsandthearts]

Your enunciation and confidence is awesome! I think you’ll go very far on KZbin, I think a little editing would take you far.

[@WanderingHawker]

I appreciate you sacrificing your buttons so we don't have to on the learning curve. I am wondering if that wonky part that slid on the backing is true North?

[@R0SIE_R0SE]

Is it possible to make small pins in The big pin maker machine?

[@Trysaratop]

I almost feel bad watching this totoral today due to your hands being so messed up from the hard work you clearly are doing. Thank you for your video, I just got mine today and couldn't figure it out till I saw your video.

[@emilypaigee]

ur actually so funny the best part was "u need to wait for the click" *BIG CLICK* "..........that was the click" came for the review stayed for ur commentary

[@user-cu8wu7ur7o]

This is the most hight quality video I’ve seen!

[@dslafacionttdonnacooper1482]

Hi rhanks for video. I purchased one and is waiting for arrival. Can i make smaller buttons with this machine as is

[@francescacostanza1778]

This is a great tutorial. Thank you for the help 😊

[@dslafacionttdonnacooper1482]

I gues mu question is if i want to make different sizes of pin big or small can i use the same machine.

[@mirakei]

I’m not quite sure. Some machines may be able to. I’ll check mine in a few weeks, I’m out on travel

[@nancyportillo1835]

I saw a video where they used a small piece of double sided tape to make sure the paper doesn’t move (the paper that goes before the plastic).

[@themendoza]

This video was a rollercoaster ride. Would she, could she do it?! Thank you for not giving up. Submit this video to festivals or carnivals. 🎬

[@lucian7691]

For the design on the pin can you use whichever paper type without it maybe making it look weird? like newspaper, books that you learn from or books that you read?

[@renyan911]

thank u so much for this it helped a lot hopefully i get one soon

[@Shadowremi2]

Can you recommend somewhere I can purchase multiple different sized molds?

[@Xskramz_archivistX]

How do I buy for only button parts from any store?

[@SweeetSteph]

Have you tried putting both ends in the machine in the beginning ?

[@emmy9416]

have u tried printing pics to make a button? if so how do u get it to be the right size

[@billytalentxpokemon]

With a circle cutter :)

[@renyan911]

yes im also wondering the same thing

[@renyan911]

@@billytalentxpokemon no they meant before printing the picture yk

[@craftypenpalmoma]

Holy crap. Are you telling me the machine holes are already lined up?? 😱

[@Pufferfishball]

omg i know im late but do u have a link for the machine?

[@yanajohari3712]

how big is the pin? 32cm??

[@lindagraham]

Fantastic I 💕it

[@ruthlaity6093]

Can you use material instead of paper???

[@mirakei]

i think so! i’ve used thicker paper, thin paper, so i think it can probably use other materials

[@ruthlaity6093]

I used thick paper and my button would not lift out of the base. Do you think it’s a defect, I tried several times. It wraps around the button but don’t lift up so I can put the back on???

[@steveglitter]

Great review! How has it held up so far? I'm planning on making a lot so durability is very important to me

[@mirakei]

i’ve made a second video showing off the button maker 6 months later!

[@hendriyustriandi1853]

is it possible to make key chains?

[@mirakei]

this is just for buttons, but you could probably use it to make keychains? you’re better off buying a keychain maker though

[@AnnabelleMRocha]

Mine has keychain parts and magnets too. I got it at American Button Machines.

[@1956bjp]

great work i just order me a kit thanks

[@EliasPluto]

Damn this is engaging

[@fqdey]

what is the weight of the paper used?

[@mirakei]

i’m not sure! i think it’s a bit heavier than normal paper, it’s a USPS stamp “magazine” so it’s a glossy paper that’s not super thick. hope that helps

[@craftypenpalmoma]

I know this isn't related to the actual content of the video..but I have to ask.. do you realize that in your description, it says you prefer people didn't subscribe .. or is that a joke? Lol

[@mirakei]

Bahaha yeah i put that 😆 i like to post on KZbin but dislike when people sub to me

[@minyummm]

girl, no prints? I was eating popcorn while making it and now I have permanent thumbprints on the pins lmfao

[@mirakei]

LOL WELL 😭 i mean… minus if you’re eating popcorn 😭

[@borchsupremacy]

100$ 80$?? The only one shop in Ukraine that ships this maker from Germany sells it for 175$

[@SirLordCustardthe10th]

I subscribed there is nothing you can do about it

[@bangipulchannel4564]

Apakah bisa bolak balik?

[@melodybattle7233]

It's not hard to use you just have to get stronger 💪💪💪

[@PauletteAndriaHamilton1999]

This machine sucks nothing is working and 2 springs fell out of the machine

[@mirakei]

oh that’s not good. if i were you id request a refund from wherever you purchased :(