Using the mini excavator tilt bucket and siding for the garage.

Mini tilt bucket and siding for the garage.

[@daves7775]

Wow. You are the FIRST person that I have ever seen (other than myself) to correctly install a "Tyvek" type weather material on building walls. Numerous people and companies use STAPLES - which completely invalidates any type of warranty. You used the correct Sealing Plastic Button. Good for you.

[@Rollie-Lund]

The guy helping me had a stapler with an automatic button feeder on it.

[@daves7775]

@@Rollie-Lund The plastic sealing button uses a Nail at the center. (not Staples) I have a Nailing gun which feeds the buttons. I use Stainless Nails to prevent rust stains. Again, however it came about - good job.

[@fullmetalneck]

Did the cylinder for the tilt bucket come with fittings? Looks like maybe what you are holding at 2:23 ? Mine did not. Just hoses with female ends and plugs in the cylinder. I've been having a hard time finding a DIN 8L (M14x1.5) male both ends with that o-ring bulked style seal on one side.

[@Rollie-Lund]

I think you can just unscrew the cap off the line from the bucket and the auxiliary and you might have to remove one adapter to get it to work. You won’t have to buy the quick coupler setup but here is where I got mine from. Dakota Fluid power in Cohasset Minnesota has the 14din to 3/8 pipe for the quick couplers. Dakota Fluid Power [phone]