Рет қаралды 57,523
Tapepro Booster Automatic Boxes are Flat Boxes - with a difference.
The "Auto Boxes" feature a spring loaded pressure plate that helps force joint compound out of the box. This reduces the effort required to operate the boxes and is handy for out of position or difficult to reach areas.
Using the Tapepro Auto Box:
• Attach handle to the box (Auto Boxes accommodate all fixed and adjustable Flat Box Handles from Tapepro - including the Twister Handle)
• Fill the Auto Box either by with a Loading Pump or by hand:
- Loading Pump: Holding the Flat Box, pull back on the Handle to open the lid. The ratchet mechanism will engage and hold the lid open. Fill the box as usual using the FBF attachment
- By hand: Release the springs by gripping the spring hook tab and pulling forward. Open the lid fully and fill the Flat Box by hand. Reattach the springs when full
• Apply the Handle brake for control and position the Flat Box on the wall/ceiling joint.
• Put the blade on the wall first then rock the box back onto the wheels to disengage the ratchet (this allows the springs to exert pressure on the lid, making it easier to apply compound)
• Release the handle brake and run the box as normal, ensuring that the wheels remain in contact with the wall
• Sweep the box off the wall by applying the handle brake and raising the wheels (this allows the ratchet to re-engage and stops the spring pressure)
• Allow 30 cm extra sweep to use some of the retained joint compound
• Clean your Auto Box after use using using water and a stiff brush
Check out the full range of Tapepro Taping Tools and Repair Kits by visiting the website: www.wallboardtools.com.au.
Stay up to date with the latest product releases and developments by joining the the Wallboard Tools facebook page by navigating to wallboardtools and hitting the "Like" button.
#WallboardTools #Tapepro #AutomaticBoxes #BoosterBox #Flatbox