UV Cure Resin, from Who? Total Boat UV Resin Test and Review

In this video I try out my latest UV cure resin. This stuff is made be a company known for their quality resins and it comes with a bonus.
www.amazon.com/shop/engineere...
/ engineeredangler
pB5ReGuDlS...
/ engineered-angler-9424...
/ @engineeredangler

[@TotalBoat]

Thanks for giving us a try, glad you liked it!! Nice work!!

[@EngineeredAngler]

I figured it would be quality....

[@kbye5323]

Really appreciate your channel. I’ve learned a ton from you. Thanks for what you do!

[@EngineeredAngler]

Thank you... that's satisfying to hear.

[@deanbrady3522]

Have a safe trip. I am looking forward to your next video. I also like the blood scale paint job.

[@thewarpsyrhead]

Like that “Blood Scale” paint job!

[@brynniebfishing]

Informative and helpful as always! Definitely liked your blood scale pattern. I may try that one. Have a safe, enjoyable trip.

[@EngineeredAngler]

Thank you.

[@jaminmaki4243]

I really like the blood scale paint scheme

[@derekbarclay4002]

Hi Franco, welcome to Oregon! Unfortunately welcome to our fall weather, ocean's gotten big, and pacific storms are rolling in. If you have family here, and can time your visits, some of the best weather is late September, early October. My latest tackle venture is going to be trying to make bioplastics for soft plastic lures. Gulp lures are made from something like that, which allows incorporation of water soluble attractants, and I want to give that a try with the gelatin/glycerine bioplastics. Ever tried that? Your videos are my inspiration to try new things, so thank you for them.

[@EngineeredAngler]

Actually I did try a gelatin based soft plastic infused with fish oils...I almost got it to work but got frustrated with it before I worked out a good recipe. Good luck. Oh, and yes I'm bringing rain gear. Cheers.

[@AAE-cg1il]

Hi Franco….Great in-depth review. When working on boats, it is said that epoxy can go over cured urethane but not the opposite. Have a great vacation.

[@EngineeredAngler]

Thanks for the info!

[@lukelabonte6869]

Great info on the UV..looooove the bloody scales..have a great vacation 🎣

[@EngineeredAngler]

Thank you!!

[@hankvana2149]

Thank Franco, always nice to have options! Wonder if the de-wetting on the silver lure was because the original surface is too smooth. Maybe a light scuffing fix that. Have a great trip!

[@EngineeredAngler]

Could be

[@stripermanly]

Will have to give this stuff a try.

[@danielhinrichsen5923]

Thanks going to give it a try

[@secretbassrigs]

thank you for this episode! awesome info!

[@EngineeredAngler]

Thank you for the feedback

[@jessec8562]

Super useful video for the projects I do, thanks for all the efforts

[@EngineeredAngler]

Thanks

[@rdgurule]

Hey there! Welcome the PNW. I live across the Columbia in Camas. I sent this to a friend who paints spinner blades for salmon. 👍👍

[@EngineeredAngler]

Cool.

[@lonecedarfarm]

I started with 2 part epoxy yrs ago. switched to uv last year. Haven't been pleased with aluma uv lately, bought the Chinese stuff you use and same issue.,doesn't seem hard, kinda soft, tacky. Lures stays in box for 5-6 hrs. Idk. Been using 2 part again. Love your videos

[@danielerickson3391]

I left Alumilite for CleanArmorUV. Really like this

[@hookreelfishing]

Great information!! Great video ++ Safe travels!!

[@EngineeredAngler]

Thanks! 👍

[@Kevin_Height-LED]

nice work!

[@mattietiger2959]

Great vid !

[@yepyepuhhuh]

I really like the paint job. Looks like an injured fish. Or even like a Southern Red Belly Dace scheme. Only much larger.

[@Shinobi-Toby]

Hi Franco, great video as always, when using the minwax polycrylic through an airbrush, do you thin it down with anything or is it good out of the tin? Thanks, keep the videos coming 💪

[@EngineeredAngler]

I thin it with distilled water about 15% by volume. So I add 15ml water to 85ml of Polycrylic.

[@davedelany2116]

I really like the blood scale paint job has a sort of koi fish vibe to it 👌

[@EngineeredAngler]

Me too.

[@morrisonx7]

Another great and informative video. I have the Total Boat UV that you use and have problems getting it to coat. Same with the Alumilite UV. What do you use as a mid coat? (I am painting over airbrush acrylics, spray paint, etc. and using 120w spotlights with a turner) I'll brush it on and turn it for a while until it looks perfect but then it comes out with blotches of little or no coverage.... Thanks for any advice you might have!!

[@EngineeredAngler]

I use minwax polyacrylic

[@HydroHowTo]

Great video! I want to find a way to add a good topcoat on my lures but with a satin finish. Would I be able to achieve that by using a satin polyacrylic midcoat and then the normal UV Cure or Totalboat as the topcoat? I've had a hard time finding straight-up satin UV resin topcoats. Thanks!

[@EngineeredAngler]

No...you would need to find a satin finish epoxy. Or, you could coat the epoxy with satin finish clear from a spray can.

[@Straight0uttaCrofton]

Happy Halloween

[@EngineeredAngler]

You too!👻

[@FishItLures]

I just bought that. I haven’t had a chance to try it yet. I put a review on here on the comment on what I thought

[@EngineeredAngler]

Yes. Would love to know what you think.

[@FishItLures]

@@EngineeredAngler it works good. I applied total boat UV and two spoons and I let it cure and it’s really a lot better than the other stuff is just right with what your video was I do you have to get a better life. Oh it takes a little longer for me to curate but yeah, if you have a a good light, it dries.

[@Crazypop430]

Hello Franck, thank you very much for your video and review, I decided to order one to make my first try on UV resin, I ordered almost all the stuff on your amazon list for UV resin and I wondered if it would be ok if I put a lure on my usual lure turner and stand with the light over or put something who hold the light over the lure and maybe an aluminium foil under the lure, rather than making a box like you ? Thank you for your reply, keep up the good work and have a good day !

[@EngineeredAngler]

Sure, you can certainly try it that way. If it sets the resin then you're all set.

[@Crazypop430]

@@EngineeredAngler thank you very much for your reply, I will try that I watched your video where you show how you make your UV chamber 5 year ago, amazing, not sure I would be able to do the same, congratulations for this work, keep up the good work Cheers from New Caledonia !

[@striperhunter-ic2wt]

Great review

[@EngineeredAngler]

Thanks

[@jimmyarrington3343]

I enjoy all your videos. Thanks. I've been trying to use uv resin. I started with teexpert. 2 30 watt bulbs. After hours in the chamber comes out tacky. Put in direct sunlight for hours and still tacky. I added 100 watt light and switched to lets resin brand and still have the same problem. I've tried brushing, spraying and dipping all with the same result. I'm at my wits end. Any advice is greatly appreciated

[@EngineeredAngler]

What's the wavelength on your lights?

[@jimmyarrington3343]

365 to around 400. I think my compartment is too big and the lures are too far from the lights. Building a smaller one now. Thanks for the quick response.

[@jimmyarrington3343]

I switched to kbs tired of all the lights and crap I have to go through with uv resin

[@carterscustomlures675]

Franco do you think if the Minwax is put over the epoxy then put the resin on that it would not separate. Great information thanks 4 the video!!!!

[@EngineeredAngler]

That should work fine

[@carterscustomlures675]

Thank U 4 that information

[@kjirstenboucher9682]

I see you put your video out about a year ago. I wondered if over time it was more durable or scratched less, and if it stayed clear? Just wondering what your opinion of this product is now if you have one. Great video.👍

[@EngineeredAngler]

No issues with the resin I went through the bottle pretty quickly.

[@kjirstenboucher9682]

@@EngineeredAngler Good to know, thank you.

[@j023909]

you have to sneak in atleast an he or two, if you dont catch who cares just take in the view, it's Beautiful up there

[@jaredrrrr5074]

Anyone wanting to build a uv box Quick tip Get a Flowtron bk 80d. Bug zapper 68 bucks Amazon Comes with everything you need to get started. 2 -40 watt 365 nm bulbs Just gut them and isolate zapper circuit I used 2 of them for 160 watts curing times cut in half.

[@EngineeredAngler]

Nice tip!

[@keithduncan4808]

I watch your videos and have learned a lot so thank you. I'm having issues with getting my lure to swim correctly. I use the same amount of resin and microballoons, and try to pour at the same temp and humidity. pretty close to the same lead blast and same position. some swim great others not so good either nosing up or nosing down. any suggestions. thanks for any help.

[@EngineeredAngler]

Are you talking about a segmented swimbait without a lip? Or are you talking about a lipped crankbait?

[@keithduncan4808]

I'm sorry I forgot to say what it was I am working on. It's a segmented swimbaits two piece.

[@keithduncan4808]

No lip

[@EngineeredAngler]

The problem is likely with the placement of the tie on eye. I demonstrate how to find the best placement in my swimbait build videos. Here's a playlist kzbin.info/aero/PLEVBv_zywucS1ZO97qP9EJsnqsHeNHpdN

[@keithduncan4808]

Thank you for the suggestion. I'll move the line tie position and see how it swims. Thanks again for your youtube videos very informative. KD.🎣

[@elkabary148]

Very good video Could we airbrush this resin ?

[@EngineeredAngler]

I believe so but I have not tried it.

[@tomswobblerbau3701]

Hello, is the resin also good for pike bait? By the way, thanks for all your great posts :)

[@EngineeredAngler]

Sure...just give it a couple of extra coats.

[@leehowell4258]

What did you use for your mid coat? I have the same issue with AlumiUV against straight paint.

[@EngineeredAngler]

Minwax Polycrylic

[@EngineeredAngler]

This might help kzbin.info/www/bejne/kGOwYpKamMSllc0

[@leesbassment6393]

I bet if you sand the surface, that resin won’t pull away like that. Scotch brite wheels on a dremel, or an arbor with Emory cloth. 300 grit or so.

[@EngineeredAngler]

I think urethane and epoxy just don't get along.

[@jessec8562]

I know you have a video on how to thin epoxy but the chemical make up is different for this so is there a way to thin this epoxy yet?

[@EngineeredAngler]

For acrylic urethane you would have to use acetone or lacquer thinner...both are a bit nasty to use.

[@jessec8562]

@@EngineeredAngler no problem I use them all the time, thanks for the reply

[@UzunKamis]

Is it possible to use UV resin of a 3D resin printer? Such as Anycubic UV Clear Resin? Thank you.

[@EngineeredAngler]

I think so...as long as you're the correct UV light.

[@UzunKamis]

@@EngineeredAngler The reason I would like to try this is that we do not have any other type of UV resin product in Turkey.

[@johnnyb1776]

@@UzunKamis Hope all is well after the earthquakes. Pretty nasty ones too

[@UzunKamis]

@@johnnyb1776 Thank you, we are in need of any kind of help. The effect of the EQs are huge in here.

[@sharonphilip5576]

When i apply my epoxy on my lure it's spreading not setting proper .why its happening..

[@EngineeredAngler]

What are you applying it over? Wood? Plastic? Resin casting? Painted surface?

[@EngineeredAngler]

This might help. kzbin.info/www/bejne/kGOwYpKamMSllc0

[@FreedomFishing]

How are you liking this resin to date?

[@EngineeredAngler]

I like it

[@jayward7536]

I'm sure it's great but the shipping through Amazon is horrible takes about week ordered 2 bottles and it's been handed to 2 different carriers and I still haven't gotten it so m I tried to order another and the same.thing is going on so I would not buy from amazon

[@EngineeredAngler]

It does take a week or two but it always gets here. I've ordered at least 6 different times. Sorry to hear they have issues where you live.if