You could also feed the two notes out directly into one of the QCs returns. These are TRS balanced mono. I like this, because you’re basically treating the external amp like a combination of an amp and cab block.
@chrisdudeword17 ай бұрын
@fraenkiboii I just downloaded this and was wondering why I was still able to control my physical amp eq. Your explanation made it make sense. I thought I had hooked it up to use preamps from the QC into my amps power amp section. This setup is almost better for my desired application. Awesome!
@truthfactreality68142 жыл бұрын
I set my QC up with the bluguitar amp 1 iridium. It switches it midi too. Epic setup
@Johnsalad2 жыл бұрын
Digital John!
@johnconnearnmusic2 жыл бұрын
What a combo ey! Thanks all :)
@christianholden18592 жыл бұрын
Great demo! This really helps with understanding the possibilities for the V4 range. Would it be possible/make sense to run this in the effects loop of the QC directly? So guitar -> QC - > Jack in effects loop -> back to QC (using the Jack's 1/4 cab simulated output) -> then use the QC xlr outputs? I was hoping to route it that way with either a QC or Helix to keep the stereo path and not have to take up to cab block
@verruckterwissenschaftler2 жыл бұрын
That is complete dope in two three locked boxes
@timharding73812 жыл бұрын
I’ve been using this method with a HX Stomp and a Rev D20. Works brilliantly. This looks great too. 🙏🏼
@BenjisBoxingChannel2 жыл бұрын
My rig is a V30, Quad Cortex and a Two Notes Torpedo live. Match made in heaven.
@lucasmiotti24292 жыл бұрын
Hey! How does QC + V30 work with other amp emulations? Is it possible?
@BenjisBoxingChannel2 жыл бұрын
@@lucasmiotti2429 this set up can do anything and everything using the 4 cable method.
@willopen Жыл бұрын
@Benjamin the v30 has a master volume so what do you use the two notes for?
@RedGreen-x1v2 ай бұрын
Hi John i am using this method with my boss MS3 which has 3 effects loops that can be used not unlike your set up , just one question if you accidentally turn of the loop with the jack or switch to a patch without the loop turned on in it there is a massive volume increase as it seems the power amp of the v4 is not controlled my the master volume ? have you noticed this
@MrSwanny667 ай бұрын
Hi John, I have a Victory Countess pre amp (unpowered) could this be used throught the QC into a powered frfr cab? I'd ideally only use the QC for effects in this setup
@VictoryAmps7 ай бұрын
Yes this should be fine to use in this application. You can have the QC after the V4 pre amp and this should be fine. Thanks Victory
@jameswaterfield6187 Жыл бұрын
Hi, what kind of cables are needed? Or does it not matter? QC manual says TS, or TRS in some situations so I'm confused.
@VictoryAmps Жыл бұрын
Hi James, for the effects loop the cables are just regular instrument cables, if you want to use the remote switching function on the footswitch input on the amp a TRS is needed for the dual function, thanks Victory
@MondoLoops2 жыл бұрын
How does the QC compare to the likes of their VST counterparts?
@AndGuitar2 жыл бұрын
Sounds great! Could you make a QC capture of that tone from 15:46 please? Thanks!
@CarlosFerreiraOfficial Жыл бұрын
Would it be possible to change the Victory channel with something like the boss gx100 connected to the footswitch jack?
@VictoryAmps Жыл бұрын
Yes this should have a remote channel switching output on the GX100, on the V4 amps there is a footswitch jack socket, this can be used to change channel and turn the reverb on and off. Thanks Victory
@CarlosFerreiraOfficial Жыл бұрын
@@VictoryAmps Thank you
@elopez7692 Жыл бұрын
Is the clean sound of this amp/pedal similar to The Duchess?? Or the are very different?
@VictoryAmps Жыл бұрын
The clean is not the same as the Duchess clean, the Duchess clean is more 50's American style. Whereas the Jack is little bit more modern.
@elopez7692 Жыл бұрын
@@VictoryAmps awesome!! Thank you!!!
@bpmthree2 жыл бұрын
Have you tried capturing the V4 in the QC?
@Bill83C2 жыл бұрын
How high gain is the Jack? I play Breaking Benjamin or Alter Bridge style high gain but also need a clean channel for ambient cleans. I plan to use my HX effects in 4 cable method with the amp as well.
@VictoryAmps2 жыл бұрын
Hi Bill, the Jack on it's 2nd channel has a lot of gain which should be perfect for this style of play, channel one is designed to be a clean channel that when you push the gain up it crunches up. Thanks Victory
@neighbourhoodmusician Жыл бұрын
Can you guys answer if the EQ and master volumes are pre or post the effects loop?
@VictoryAmps Жыл бұрын
They are both before the effects loop.
@neighbourhoodmusician Жыл бұрын
@@VictoryAmps Damn. Was hoping otherwise. Thank you for your prompt reply 🙂
@Utube-g3g2 жыл бұрын
But John, I use just the return fx for power and real guitar cabinet and it feels like a real amp. No 4cable method. No offense. I’m just saying how I use it. Sounds and feels great.