v6 honda engine knocking fix

Hi, don't get full by mechanic who just want to take your money or your car telling you that your engine is done , please watch this video and maybe you can save big money.
here is the link for the socket
amzn.to/3MazCzs

[@kennethjones3337]

Excellent work and the shop told me it was rod knocking? And I needed a engine. 😂 I hate shops like that ripping off folks! Thank you so much

[@youhavethepowertochoose1617]

thank you so much for the free 99 solution to my wallet...lol... A mechanic told me i needed a new motor. Then I came home and I came across your video during my own research. I almost thought i had to buy a new motor. Even so called professional mechanics will take the little money people have. Thank yall for being %100. #KeepinitReal

[@nestorautorepair]

You are welcome Tao , thanks for your feedback

[@incorporatedmadness9125]

That's freaking sick dude. Awesome detailed video. Seems like a common problem with the v6 Hondas

[@nestorautorepair]

Yes sir thanks for your feedback

[@mikeschiavoni5973]

@@nestorautorepair thanks for doing this video. It will be good for you and other good techs to show customer the problem and get residual down the road.

[@lawrencecavens5760]

Great job there, But here's a good tip for you that I learned from my early years and that is to preset the tentioner before installing. This is done by holding the unit in a vertical position and using a C clamp compress to remove the pin then slowly release the shaft to fully extend it then compress it back to preload state ten reinsert the pin. Now you can install. That step is crucial to do to make sure no air is trapped in the cylinder.

[@nestorautorepair]

Thanks will do in the next ones

[@mikeschiavoni5973]

@@nestorautorepair ehh, catch 22. Could introduce air to factory compression.

[@pvb9964]

@@nestorautorepair possibilty of bent valves if the belt jumps some cogs?

[@dahraf88]

Had issues with Dayco parts. Aisin way to go

[@garyr7027]

Those crank shaft sockets work great with a good impact. I could NOT get my crank shaft bolt off on my 02 Accord 2.3 for anything, tried everything possible, even with my Milwaukee impact UNTIL i bought one of these sockets and used it with the impact. It's amazing how that one socket did the trick, along with my impact wrench, she zipped that bolt off in a seconds time. Cost me 16 bucks on Amazon, best 16 bucks i ever spent.

[@nestorautorepair]

Yesss sirrrr

[@veronicarubio1941]

WoW your an Awesome Mechanic... this is Valuable info , l know alot of Mechanics that would say ohhh it needs a new engine. Your saving Hundreds to Thousands $$$ with this Video... Thanks for your Knowledge. Shared and Subscribed😊💯 💯

[@nestorautorepair]

Thanks boss yes we never stop learning ,, thanks for your feedback and sub

[@expatlivingindr7552]

Gracias mi hermano por lo bueno y informativo videos. Da gusto ver personas con tu humildad y honestidad.

[@nestorautorepair]

Gracias brother

[@franco92410]

Thank you for putting out this videos, it helps a lot, I like to work on my own cars cause I save lots of money.

[@nestorautorepair]

There you go you're welcome boss ✅ thanks for your feedback

[@norrisbailey798]

This video helped out 100percent Thanks guys.

[@nestorautorepair]

You welcome , thanks for your feedback

[@sunjoomoontube]

Thank you for sharing your expertise. I had recently 4 Honda J35 engine timing belt set replaced. Those indeed produces the same noise but only upon cold start.

[@nestorautorepair]

Yes sir you're welcome , thanks for your feedback boss

[@philpet1295]

Good video but the only thing that needs to be done is take lower cover bolts out and put a wedge in to hold cover out of way and bend tensioner pin to the back and pull out most of the way so you can pull it out easily, takes about 30 mins for experienced mechanic.

[@nestorautorepair]

Yes but I took everything off for the video , thanks yes I done it both way

[@highendtrends3508]

Quality mechanic skills!

[@nestorautorepair]

Thanks boss

[@CRAPO2011]

Ive heard of people selling theyre hondas due to this tensioner. J series can run nearly forever with timing belt replacement every 107k

[@nestorautorepair]

Yes sir they don't know the fix is easy

[@MrSamPhoenix]

Very true

[@1_Bad_Z]

I read somewhere that a Honda was bought from a kid who thought it was a knocking Internal issue. Buyer bought it cheap and turned out to be this.

[@nestorautorepair]

Nice!! Sorry for the seller

[@scottmiller6771]

Very good video! Here are a couple questions. Is tensioner replacement part of the 100k mile timing belt service? Can the tensioner fail or wear prematurely between timing belt service? I have 250k miles on a 06 Accord exl 3.o vtec.

[@raiderrichard7291]

Damn I bet a lot of people thought it was rod knock and sold their Honda’s. How sad.

[@nestorautorepair]

Yes sir

[@jeremyramos4774]

Just took mine the the mechanic 08 accord v6 I already had it up for sale lmfao currently getting fix

[@nestorautorepair]

Thanks , 👍

[@henrylee2964]

you shouldn't use ac delco parts on a ON A HONDA. THEY DONT fit . Use only Honda OEM parts on a Honda vehicles. for best results..

[@nestorautorepair]

Dale esta Bien la proxima maestro

[@alexandercahoulan6583]

A-fing-men to that shit

[@germanflores9381]

Thank you dude my dad was like sell your car but I saw this video

[@nestorautorepair]

Yes sir you're welcome

[@joshimirobot8266]

I had my belt snap on me on my MDX. Same engine, pretty much. It's now at the mechanic, hopefully the valves were not damaged. The crazy part is that the timing belt was replaced 20k miles ago with honda OEM parts.

[@nestorautorepair]

Wow let's hope is good that happens to my honda odyssey before I got it , I just put a new engine in because it did bent all valves

[@hashishsenju2015]

Dude that replacement timing belt better not be from ebay or Amazon. They sell fake Honda timing components that are made in China. Garbage that will kill your engine.

[@nestorautorepair]

I know bro I did get one for my Odyssey from eBay and 1 year later timing belt broke , thanks God it happen when I was stoping at a red light and not taking off , I put a new timing belt and engine still good I still have the van

[@jeywright2786]

Excellent video my brothers! 💯

[@nestorautorepair]

Thanks bro , thanks for your feedback

[@autorepairpbp9310]

You is professional mechanic

[@nestorautorepair]

Thanks boss sometime I is mechanic!!!

[@mariadelacruz34]

Gracias por resolver el problema súper agradecida 🥰👍🏼👍🏼

[@nestorautorepair]

Gracias ,, de nada , me alegro que le guste

[@notlotfi]

yo thank you alot cuz that saved me alot of money cuz fixing my kia sportage 2007 4wd its really expensive

[@nestorautorepair]

Yes sir you're welcome boss thanks for your feedback

[@habebs7345]

Great video I had a rattling noise which sounds similar to this for a day then the next day I was driving it all the sudden I started losing power, and a very hurtful, rough idle to where the car wanted to stall, I turned off the engine, then started it back up two times for a few seconds each not wanting to damage the motor. What do you think have i bent any valves?

[@nestorautorepair]

Wow I will say if the car still starts, you are good , get the timing belt replaced with all the kit , don't get this staff on line they are not real

[@VHLM10]

Sounds like you had your catalytic converters go bad and then they came apart, clogging the exhaust?? Happened to me lol, had to unbolt the cats and put screwdrivers as spacers to let the exhaust out so I could drive it home lol

[@devinbland7561]

Thanks. Just got this noise and was confused on what was making it.

[@nestorautorepair]

You're welcome boss

[@4pf339]

my honda (v6) makes this sound but only when its cold. could it still be the tensioner?

[@nestorautorepair]

Yes it can still be the tensioner

[@rufusonyedikachi8768]

Thanks so much Sir for make this video

[@nestorautorepair]

You're welcome boss

[@nicholasleslie1162]

Just a quick question, before replacing the timing belt tensioner, did the rattling stopped at any point in time when the engine was running?

[@nestorautorepair]

No it was on 24/7

[@lawrencetee4436]

I’m guessing me and you have the same problem. Mine would stop after a few minutes of driving. So I’m wondering if this tensioner pulley is my problem or not.

[@nestorautorepair]

Maybe yes

[@kushpakk2210]

@@lawrencetee4436mine stops as soon as it warms up (after about 5-10 mins of me starting it)

[@joestropkai8597]

I told my Mechanic about this he said he check the timing belt and it wasn’t loose. He thinks it’s the motor. Is it possible for the timing belt to be tight and the tensioner still make this noise.

[@nestorautorepair]

It can make the noise been tide yes if is bad it will

[@chadrose]

Am I the only one who was saying ‘Why TF you say start it again with a bad tensioner? It could completely fail and kill the heads and pistons 😂😂😂

[@SHRPSHTR]

Hey uh, my Honda was doing that noise but then all of a sudden now it's gone. And now it sounds as if the sound became a dragging noise

[@EBM_786]

I bought my 04 accord couple of years back from an old lady 1 owner now its got about 335k on it and during this cold weather i started hearing this same kind of knocking noise ... i work at a Nissan dealer as a service advisor so i got it checked from my techs and they said its coming from the top end from inside the motor ... so my options were either to get a new car or a used motor (since the body is still solid with no rust) untill i came across this video 👌 hopefully this will fix my problem ... now if it is the problem what else do i need to replace with the timing belt tensioner?

[@nestorautorepair]

Oh nice wow that's a lot of k lol So yes if that's the problem get a timing belt kit and replace all the tensoner and pulley in there as well new water pump and belt , let me know please

[@EBM_786]

Will do. Its not in miles though i live in canada maybe u thinking 335k miles. I am scared to drive it now dont wanna ruin the head. I will buy the parts on a Monday and will drive it straight to the mechanic hopefully nothing goes wrong🤞. Thanks a lot for making this video 👍

[@nestorautorepair]

Yes sure you welcome I had fix 2 honda accord v6 same problem , please show my video to the mechanic so he can test it before he put all this new parts in , tell hem do what I did so you can see it before you put new parts

[@desiredobject6687]

@@nestorautorepair this video is awesome!!!

[@EBM_786]

@@nestorautorepair I am happy to tell you that my car is all fixed now and runs smooth like butter thanks to you and your effort making this vdo ... i've replaced Tbelt, Water pump, Tensioner, Idler pulley, Serpentine belt, and Engine mount ... the only prob i have now is p/s fluid leak ... i guess ill just keep topping it up

[@RobertEMason]

Great video

[@nestorautorepair]

Thanks for the visit boss

[@sakibamin70]

Great job brother if you are in ny I’ll bring my car to you.my accord 8th gen. It was cold I was pulling it ran pretty smooth. Car was always burning some oil. Power steering was leaking water pump was a bit wet . That day car was vibrating in cold weather on red light .popped the hood. Saw valve cover was leaking I was ok with it. But then right around the middle of the block around fuel injectors I saw few holes some were uneven .it was gunk and corrosion. I cleaned it with screwdriver and then cranked up after driving 5mins engine is loud opened the hood I hear cylinder 2 or 3 injector is clicking loud along fuel actuator behind it and the tensioner pulley started making noise as well. Now I’m scared if I damaged anything inside the engine with screwdriver .? But then ports aren’t on injector . Or it’s because pumps were bad and the weather got cold so gasket shrinked. Please help brother what could be done?

[@rashidamoore6631]

I'm having this issue with my car. What parts do I need to purchase? This doesn't seem hard at all

[@nestorautorepair]

Timing belt tensioner

[@edward569]

Gracias hermano. Esto es el mismo ruido que ase mi honda accord 07 con el v6 3.0 bro.

[@nestorautorepair]

Dale de nada

[@kevinspencer6039]

can you fix my car 2010 honda crosstour durham n.c

[@nestorautorepair]

Yes I sure can

[@asmrgodzzz7549]

I replaced the timing belt tensioner and it still knocks when it’s cold and under load. Any suggestions?

[@nestorautorepair]

Try to use thicker oil , they have this stall call lucas engine oil treatment out half of the bottle in

[@raiderrichard7291]

I would only use OEM.

[@craigmorgan7582]

I have a V6 Honda Accord 2014 similar sound it happens when I start my car the sound seems like it’s in the engine how could I send you a video to see if it maybe a similar case

[@nestorautorepair]

Sure 571 2678581

[@Duey_du]

Mine is doing the same thing...

[@murrayndumba3290]

Nice work bro am learning alot from you...have a question out of the topic what's the best camera youtube for a starter or whats the best starter kit for youtube for a beginner?

[@nestorautorepair]

Hey thanks ,, well honestly if you have a smart phone this will be the best way to start ,, all my video I take them with my pixel 3XL I just got a gopro8 but I still find it easier to do the editing on my phone lol

[@xCeexus]

What happens if you don’t replace it ?? My 2016 Honda Accord V6 just started to do this

[@nestorautorepair]

The belt will snap, and there goes your engine

[@xCeexus]

@@nestorautorepair yikes! So how long would it last if it’s been running like that for a week now?? 😅😅😅

[@xCeexus]

@@nestorautorepair Only shop that can do it near me is charging $990

[@ayearetee3342]

I get a very similar noise in the same spot moreless but only on start up after running for a few minutes it goes away did you get similar symptom?

[@nestorautorepair]

No the noise did not go away until I replace the new part

[@ayearetee3342]

Ok i haven't heard it again ill be waiting so I can pin point the noise when it does thank you.

[@nestorautorepair]

Ok it can be low on oil

[@ayearetee3342]

I do have a leak on the top right of the engine I don't think its coming from the valve cover gasket. I been googling and I think its from the oil control orifice. I've yet to do more research

[@nestorautorepair]

Oh ok

[@95bizzyb]

Where did you get the parts from and what is the name of that socket that was used to take that bolt off

[@nestorautorepair]

Got the part from AutoZone , here is the link for the socket amzn.to/3MazCzs

[@realmadrid091884]

Tengo una honda pilot 2012 puedo Cambiar solo esa piesa por el lado de la llanta del pasajero o tengo que quitar todo por Arriba? Gracias

[@nestorautorepair]

Tiene que quitar la tapadera de la Correa del tipo arriba y abajo

[@MrRedHotChiliMan]

Man I hope they didn’t need a timing belt anytime soon. If so, they should have just changed everything. Nice work though, even though I’d prefer better quality parts. I swear Latino’s are the best mechanics.

[@TheCriptomagic]

Would like to know about the Timing Points.

[@nestorautorepair]

Ok

[@nestorautorepair]

2 cams lines on top and one mark on the bottom

[@MrSamPhoenix]

Nice video, but while you guys were in there it would’ve been best to also change the timing-belt, water-pump, & the pulleys. Certain things in there looked a bit “rusty.”

[@nestorautorepair]

It was change 6 moth ago , I don't know why the tensonador fail

[@MrSamPhoenix]

@@nestorautorepair a whole timing-belt kit was used?

[@nestorautorepair]

This car they did had a new kit install and 6 month later this happen

[@MrSamPhoenix]

@@nestorautorepair with a brand new timing-belt tensioner? I know some kits don’t even come with it.

[@nestorautorepair]

Ok

[@jesserodriguez9021]

Nestor, necesito tu ayuda😐😐 with low iddletill My 2006 honda Accord 2.4L. Changed spark plugs and VTC solenoid. Still with low iddle and shutting off. Engine making knocking sound. But once it takes of fover 30mph, goes back to normal. How do I reach you?

[@nestorautorepair]

I think you need valve adjustment I'm in Sterling va

[@jesserodriguez9021]

Thank you. I'm tired of this mechanic called Google.LOL

[@nestorautorepair]

Lol

[@ChiicoK3lly]

Gracias hermano.

[@nestorautorepair]

De nada bro

[@noahredd2388]

I have a knocking or rattle on my 2004 accord 3.0 v6 when I put it in reverse u can hear it the most or when I’m driving slow what do you think it is?

[@nestorautorepair]

Check the serpentine bell tensioner

[@noahredd2388]

I will let you know if it works

[@noahredd2388]

Just recently changed my belt because it was all eaten up too

[@raulinazario9462]

Fino caballo saludos PR🇵🇷

[@nestorautorepair]

Hay Bendito! Klk

[@c-hitit-4me175]

Where are you guys located and do you fix anybody with these problems?

[@nestorautorepair]

Yes we can fix it ,, I'm in Sterling va 20164

[@danp7463]

And this is why you NEVER REUSE A HYDRAULIC TENSIONER!!

[@nestorautorepair]

It was new from China 🇨🇳

[@javinsankar4655]

Do you live in Florida?

[@nestorautorepair]

No in va

[@javinsankar4655]

@@nestorautorepair do you know a mechanic in Orlando ?

[@nestorautorepair]

No sorry

[@iamcaferacer]

How much will this cost at a shop?

[@nestorautorepair]

At my shop it will be $250 just the tensioner or $600 full kit water pump timing belt labor only + parts

[@homeroarzate453]

Question si no quito la pulley tengo que poner en time otra bes? Ei nomas quito el tentioner?

[@nestorautorepair]

Correcto si no quita El pulley no tiene que ponerle a tipo , pero si tiene que hirarlo a Mano para confirmar que Este a tipo

[@homeroarzate453]

@@nestorautorepair ok pues aber que pasa

[@homeroarzate453]

@@nestorautorepair muchas gracias

[@nestorautorepair]

Ok suelte

[@stansinosaingo8295]

Thanks guys

[@nestorautorepair]

You welcome

[@wpo845]

What's the name of this part?

[@bl.randy617]

Oh very interesting engine knocking need to replacement and it seem sound like citybus or yellow school bus engine LMAO!!!

[@nestorautorepair]

💪

[@yonasg5433]

MY Honda accord 2005 only makes sound when I am at the stop light or WHEN the AC gets turned on. What do you think it is?

[@garyr7027]

Possible bad AC belt. At low idle at a stop a bad or loose belt will slip, when the AC on it will also slip. When they're so loose they slip, they can also flop around making a noise... just a guess based on little information.

[@nestorautorepair]

Correct

[@Camileon8]

I gota do this now brother 😩

[@nestorautorepair]

Ok good luck

[@segunagustin9500]

I have the same problem where is your location i have 2003 honda odyssey

[@nestorautorepair]

Hi please Google nestor auto repair

[@nestorautorepair]

I’m in Sterling va

[@user-dg2yn8ds3k]

Как ремонтироват гидронатиэиьел хода одиссей

[@fredyb8382]

Ese mismo ruido hacia la odyssey q tengo