V8 SWAPPING A FARMALL TRACTOR - JOHN DEERE HAS NOTHING ON THIS!!!

[@officialweldingfarmingarch2041]

JOIN OUR EXCLUSIVE PROJECT SUPPORT GROUP With WEEKLY GROUP CALLS For Coaching On Farm Equipment Repair, Welding & Metal Fabrication! Its An Affordable, And Easy Skill-Building Program With Only A 1 Month Minimum! Learn About The Program Here: kzbin.info/www/bejne/gpPbqY1qoZ5_pLc Join The Project Support Group Here: www.patreon.com/OWFA/membership

[@mw3gamer23]

These videos are nostalgic I remember watching them when they were first posted

[@johnmccallum9542]

x2 I remeber his vids from his moms farm garage with a farmall there as well and BBQ builds , and bumpers

[@mrgoodtimes05]

Can't believe you cut that front clip. That was worth alot money. Other than the dent in the bed, you had a nice square body. Alot of people are building them and looking for parts

[@bighunterman77]

the good ole days of you in this house/shop brand new at that time.

[@donaldwallace1525]

Those square body GMs are quite expensive to use as a donor.

[@earlcowley3393]

40 years Ago my brother in law and I put a LT1 350 in a Massey 44. It cost $13.98 for a coupling chain and sprocket, and steering was a nightmare. But it would wheelie in every gear, and do 60MPH. Very scary.

[@jasonpatterson947]

Gezzzzzzzzz

[@panders55]

We had serveral 44's and the governor went out of one and it would go over 30 in road gear. Scary isn't the word.

[@russhfan]

Maybe you haven't heard what old Chevy square bodies are going for.

[@uthermaceanruig5098]

I’ve got a Massey Harris 44 with a 283 Chevy in it. It has a three speed GM manual gearbox between the engine and tractor transmission. Didn’t have to lengthen the frame and all the sheet metal fits like it should. It’s got 3pt hitch, pto, hydraulics and power steering. It’s actually quite a handy tractor. Will probably swap the 283 for a bigger small block. The 283 is pretty tired. But ya use what you happen to have on hand when tinkering in the shop. Enjoyed watching your video. Good job 👍.

[@huckstirred7112]

if you another swap might think about a four speed

[@traderjack6151]

I cry’d myself to sleep after i seen what you did to the Farmall & square body 👩🏻‍🌾

[@inventivemachinist8747]

These videos are still classics! First one I found was the ring roller build because I was making my own iron roller

[@russellmcelreath7918]

This is when your content is the best, creating, fabricobbling, and welding. CKE2009, please put a rollover bar on this beast. Torque is a fickle friend...Russ cheers 🇺🇸

[@linctexpilot8337]

He sold it years ago......

[@bairfamilyfarm1336]

I am damn sure I saw this series a few years ago. I can’t explain it, but you rigged up a throttle style lever for the automatic transmission shift linkage, extended the frame rails to accommodate the engine and transmission, and had to reinforce the frame because it kept twisting. I can’t remember the channel name, but I’ve seen the same guy, same truck, same tractor, and heard the same voice.

[@briandietrich1373]

You are seriously good welder and machinist. I wish I could take lessons from you!

[@hpelisr]

Hell it even sounds like a tractor. I 've got to say, from one hack to another , that is one hell of a build.

[@hughwolfe8524]

You have a Great set up for FABRICATION and custom welding, Wish my shop was that well equipped... love the videos

[@mcfwelding]

i remember watching this build.. it was epic

[@officialweldingfarmingarch2041]

Thank you!!

[@melindaortiz9741]

Classic

[@simonenglody9130]

I've been looking for this channel for years I'm guessing that KZbin assonated the og channel

[@timothyallbritton1961]

This is the video that Cleatus watches when he shows his guys what not to do!

[@ethanbutzman]

Chevy looks to be a 350, with a th350 and np208 t case! Ive got a reversed w9 with a 302 ford and auto trans (2wd). It looks that you put the tractor trans in reverse to make the auto trans correct for you're direction of drive!

[@elmetbrown656]

40 minutes of ramblings about scrap metal

[@chieflefthand780]

I did this with a F20 also. I used a Ford 302 with an automatic. Was a sweet machine. It looked a lot neater than what you have.

[@parkersposts]

He should have used the original tractor transmission and bolted the engine up. With an adapter plate and make the fly wheel fit.

[@CheeseMiser]

You should see some of the tractors my grandpa reconfigured.

[@michaels.ramsey7803]

Once the Ford engine went in, it was all gravy. Where are all the Chevy boys? Great fab skills!

[@mikerobi6100]

this is awesome video i can't tell you how much i learn from your video's i hope to have shop like your someday. I am working on getting stuff together to do all that too i love the 460 swap the tractor is so cool your skills are awesome

[@jason0870]

Very creative backyard engineering. Keep on keeping on buddy!

[@highdesertbill]

Thought your X wife got all these old videos of yours. Good for you for having them

[@Rebel9668]

Apparently you've never been to the National Farm Machinery Show's annual tractor pull in Louisville, KY, lol. They have some pretty wicked John-Deeres there. :) If your main tractor has a generator on it then it'll take it much longer to charge a dead battery than if it has an alternator. Our old John Deere "A" and "H" were both like that. They charge pretty slowly but when they were built it was assumed you'd be out in the field with it all day and by then the battery would be well charged.

[@Canteen1107]

I’ve missed these videos so much I’m happy your back

[@jamesbromstead4949]

Chuckie's yard... where all old farm equipment and vehicles go to die.

[@rognavolter]

'Build a table and work on floor anyway' ... yup, that's the recommended technique

[@robbieoff-road9329]

should of done some tractor pulling with that

[@clf235]

I bet all that 350 needed was to lap the valves, replace the piston rings and hone the cylinders. Watching you Steering that beast reminds me of watching guys steer the old steam tractors.

[@chadnelson924]

Bet your neighbors love you👍

[@jeffreymurdock8366]

I remember this video on the old channel. Can't wait to see the engine after this one.

[@spencersand2754]

He sold this tractor

[@southern_merican]

27:22 🤣 i was literally thinking, "this is some 'merica sht" , then u said "merica" 🤣 hell yeah man. The neighbors will get over it ! Lol

[@themotorfreak1]

holy hell, i've been looking for this video for forever! was wondering what happened to the intergalactic harvester i remembered. its been years since i watched this.

[@bairfamilyfarm1336]

I am so glad you remember, I was starting to think I was going insane.

[@hombredeacero3131]

One heck of a build

[@hughwolfe8524]

First engine removal and installation was A mazda 2 liter 4 , in 1990 .

[@hughwolfe8524]

That is one way to do it 😉 I guess , doing this stuff for 32 yrs

[@shaneharrison4775]

Done that with a 6 cylender massy harris the 6 banger was clapped out we put a 350 in it wit a paired set of transmissions along with the tractors transmission and drive train total trannies 3 2- 4 speeds and one 6 speed tractor tranny the 2 4 speeds are one straight and one reversed and coupled to the tractor tranny as well as the main engine tranny

[@godfreypoon5148]

Heck yeah, it's the Intergalactic Harvester!

[@karlschupp8552]

When was this video made?I never saw it on the old channel? Thank you for reposting it!!! Luv ya's from Kentucky!

[@gurlalwraich7526]

Why you put that engine with transmission it will make huge power loss , connect engine directly to tractor gearbox

[@redneckryan615]

It's so hideous and hacked together... I love it. I've always wanted to build something similar, except looks a bit more original, using a Farmall M and International 304, 345, or 392.

[@jakeneal1883]

I have built one of these check out Farmall m with V8

[@redneckryan615]

@@jakeneal1883 I checked out your videos. That's awesome! Exactly what I want to build.

[@willmarshall3552]

I did this with an old f-20 internation farmall. Took a 266 internation v8, a chrysler 904 auto, extended the frame and converted the driveshaft, so had the 4 in tractor and the 3 in auto. now it travels at about 20 at 4000 rpm. not great but better than 5 1/2 mph

[@ronaldbertin9455]

Check plugs and rocker arms , sounds like it's running on 5 cylinders

[@officialweldingfarmingarch2041]

MORE: For those who like the things which KZbin doesnt, join us on a free mobile app called Telegram, under "Tractor Hoarders Group Chat", in case we get cancelled on here! Also, check out our Patreon page to help support the channel: www.patreon.com/OWFA?fan_landing=true SOME OF MY FAVORITE TOOLS: KNIPEX German Made Pliers-Wrench: amzn.to/35fchvN OTC Slide-Hammer Kit: amzn.to/3p7mq4Q Carbide Burrs - An Affordable Set That’ll Last: amzn.to/2VsxTgH SUNGLASSES I WEAR - Quality at twice the price: amzn.to/2VegmbE Regular Safety Glasses that I Use: amzn.to/2ATXtEf Yes, these are affiliate links. Thanks for watching!!

[@dave-wk4t]

Had to give up on the Hoarders Group. Too much BS and nil tractor content.

[@michaelrupert1411]

Do you still have it

[@lucasmcmillan4418]

Nice tractor I would to have one like it

[@jarrettwalters6632]

That’s awesome man !!

[@AndrewHCann]

That a excellent video also quit big project to building and get 350 motor fully rebuilt also carb to plus heavy duty clutch plus bearings in main 5 speed Manual ! Also unverisal joints should have greaseable types too because of torque and hp of V8 motor strength is ! Also take to pulling contest see how pulls and tractor shows too !

[@stefjones418]

you could put the chevy front axle on there and make it 4x4....hahaha

[@nhlakaniphombatha5769]

So much horse power ...must be the powerfully tractor I've seen.😂 .now that's pure power

[@K4K96]

Still a class favorite thanks for uploading it... again 🤘!

[@wcmwfab935]

Grease zerts. They have threads on the ones you used? It didn't look like it. Never seen that style you used. Right on, feedback on them. They don't pop out with pressure?

[@WildBill1122]

Wow that is awesome!

[@dennisdunnuck1708]

I love this guy where's there is a will there's a way

[@DC_PRL]

That's some serious steam punk stuff, haha...you could sell it to MadMax movie set if they ever plan to make another one!

[@curtistucker8059]

I think your tractor may actually use more oil than it does gas

[@emanuelvassallo1146]

It is a mad mad world build

[@jj-zy6gc]

Was that a pressure-fit zirx fitting??

[@FAL0perator]

I remember watching this video for the first time in the old channel! Whatever happened to this project?

[@tstricklin4808]

In the voice of Bevis 😳Ahhhhhh yes yes yes FIRE, FIRES K👀L,😁✌️DIG IT

[@davidchapman1519]

How does it compare to the massy Ferguson V8 tractor?

[@melindaortiz9741]

Great re editing

[@jimmydykes7961]

Nothin like screwing up a farmall...and with a Chevrolet of all things

[@shanelitzow2059]

That farmall didnt know what was gonna come up in 70yrs when it rolled off the assembly line...

[@alexdarte2]

awesome job

[@scarling9367]

"7 cylinders of mosquito killing fury!"

[@PAUL-1961.]

engine sounds like it has some major problems having sat so long

[@garylam6233]

That shop needs exhaust fans y’all shouldn’t be inhaling all those smoke fumes . Thanks for entertainment

[@simsonfelgyo]

Awesome video, what are the names of the musics?

[@paulfranklin599]

I have no doubt they can see this thing from space !

[@jeffreybrookes9731]

You need a better donor motor. 👍👍👍👍🤣🤣🤣

[@darrylgalbiati5646]

Sounds like a dragster yeehaw.

[@Michagan_outdoorsman_James]

hell ya, rock on brother !

[@daviddrane6643]

I did the same thing with a 4 cylinder Toyota 5 speed trans.. more power then enough. 2 trans with high and low in tractor...

[@dakotak8437]

I see dually on that thing. I'd bring the engine setup down more

[@pistonringfarms8107]

Although it hurt watching you cut that truck apart i aint mad cuz u made a v8 farmall. Its bad A.

[@willardlentz3044]

Texas bush hog would be a good name 😁

[@clarencetetterton7097]

I would of fixed the truck up. Piss on the tractor.

[@warrenmichael918]

Where did this ever get to? I remember it but not sure where it went

[@jblazer147]

He sold it on ebay im almost certain

[@levicochran8614]

Exhaust should have been pointed up.

[@petrstuntbiker885]

Nice work 👍 great tractor 👌💪🤓

[@orangepickel2]

Didn't you have one of those little 750 milliamp battery chargers in a 500 foot extension cord hooked up for that battery on that tractor to keep charged. You Brag up having several of? How many gallons of oil are you burning that are blowing past your rings on that small block engine?

[@mironeko3820]

There's no replacement for displacement!

[@johnnymunro4650]

Do u think the motor seen better days

[@raymondquave2843]

Needs some risolene or marvel mystery oil or rings an head job lol

[@hansjansen7047]

The V-8 needs an overhaul and the 12 volt fuel pump would improve its looks.

[@ornothopter188]

now how fast can you make it go, how how much can it pull

[@mountainbriarfarm5030]

I like that people always knock john deere for having two cylinders (which by the way are amazingly powerful) but they forget about the guy who swapped a john deere 830 engine with a cat V8. This farmall. Has nothing on that. Long live two cylinder power friends.

[@jamesnoord6295]

I've seen Johnny poppers with an inline 4 cylinder in them. I was told they modified the crank and used a ring and pinion to transfer power.

[@mitchellholroyd2837]

That's epic!

[@eagerlawncare3700]

Doubtful that the odometer rolled twice the doors on a Chevy start to fall off at 250,000 miles and the electric windows stop rolling up and down

[@dogbox61]

missed you bro

[@miguelamaya6246]

AWESOME DUDE...

[@royo1450]

Blast from the past

[@Tech-NO-City]

This video blew out my speaker

[@wcmwfab935]

Hypertherm 30air. Nice I like mine, you?

[@turbo5488]

Plus put on some 18in tires on the back and some wheelie bars on the back you almost got a pulling tractor out of that H

[@richardkruse1574]

you are doing every thing half assed i guese it dont matter i did the same put a ford 534 ford gas in a f20 farmall with 24.5 32 tires pulling tractor

[@Speed-Mus]

Killing hondas in style

[@DaveJohnsonad5nm]

A bit much for raking hay. 😆