v8 working paper engine model

This model is almost completely made of paper (except some scotch tape on valves to eliminate friction) and runs on compressed air.
LxWxH: 32 x 24 x 27 mm
Shafts diameter: 1 mm
Piston stroke: 6 mm
Cylinder diameter: 5.5 mm
"Swept volume": ~ 1058 mm3
Effective power is not measured, but it is enough to move simple vehicle prototype - • Paper vehicle prototyp...
templates: drive.google.c...
tutorial for paper axis: • Templates for paper v8...

[@reytampubolon6390]

imagine using it on a paper airplane :3

[@origamigek]

That is ridiculously small and delicate, and it works so smoothly! Excellent craftsmanship!

[@drongojonkins8945]

What's incredible about this, apart from the skill and patience involved in making it, is that it actually sounds like a V8. The rotary one you did sounded like a rotary too.

[@BombermanX]

I put the wrong octane air in my engine and now I hear this knocking sound. Help.

[@pureblooded3877]

Your pistons are suffering from "knock". Go to a mechanic or something

[@vanshthakkar722]

Use anti knocking agents

[@FlyingTurtleish]

@@pureblooded3877 lmao bro he gonna need a new engine if he didnt get it fixed soon enough

[@ashtxch_]

This would be the BEST engine to win the balloon-powered-car races

[@brodie5036]

Co2 tank 🤔🤔?

[@davidrobert2007]

This has to be the coolest thing I've ever seen, just amazing.

[@theColeHardTruth]

The finishing touch is that it's powered by a balloon. Truly this is the ultimate DIY project. You are a craftsman hero, sir.

[@wenliang4757]

Now make a paper car. and install the engine.

[@nothingssmore]

+Wen Liang to do this I need small, lightweight and powerful source of compressed air, because relatively hude balloon can hinder for car to go

[@oldfrend]

+Aliaksei Zholner upscale it a bit, say, 1/8 scale, and use those computer cleaner air cans. something like this: www.newegg.com/Product/Product.aspx?Item=9SIA3ZT1C55778&cm_re=compressed_air-_-1K5-000D-00003-_-Product

[@moistenedeel4791]

+Aliaksei Zholner you can use compressed air cans or maybe a small motor attatched to air pump? also, do you have a schematic/printout because i love making minature scale objects but i havent tried an engine.

[@Maker5464]

+Aliaksei Zholner how about co2 with limited flow? www.topeak.com/mediafiles/products/1265/

[@wenliang4757]

No we dont need any Romanticism about meth for this individual. We need his mind for better usages.

[@jaylyntheracoon677]

one gives me anxiety two how does it not break? three why do i feel like this is ileagal

[@spacesatellite8579]

Весь мир на кончиках пальцев - мелкая моторика на высоте - браво !

[@Perktube1]

How many miles per balloon does it get?

[@stompyrompy]

I read about this in FOXNews. We need more innovative thinkers in the world like this if this guy can make an engine out of paper imagine the potential of what you could make. Make a Wankel rotary engine next then I will truly shit. Great video

[@stompyrompy]

+Dami Nooki couldn't find it. I'm no hater for people who use KZbin to show their talents in making things. Thanks now I am looking at knex videos

[@Thsicnfnsjsbxnf]

Now that is amazing! I would have died before ever completing a tiny paper model like that

[@GreatMalmsteen]

it even makes the v8 sound haha

[@Palexco]

I remember your first videos years ago, then your v6, now your v8! These are crazy amazing. Keeps getting smaller and more intricate.

[@Jafromobile]

Now you have to make a paper powerglide transmission.

[@hexagonal7708]

no no no no no no, no me lo pedo creer, como rayos puede alguien ser capas de construir semejante obra de arte? es super impresionante, mi cabeza esta a punto de estallar

[@vaccumsealed]

that's creative. people say, "oh, he just has too much time on his hands." That's just their way of saying they're not that talented. The guy has made a working engine from PAPER people!!! I'm sure he could have been doing some illegal shit like selling drugs to kids, but he took his time to painstakingly create a form of art, and who knows? Perhaps this guy will gain some recognition for his skilled craftiness and even get in the guiness book of records. Cool motor nonetheless. Now iiiiiiiiiiiiiiii wanna see a full scale car to go with it. haha. Challenging? I'll give u the model. How about a 59 caddy Eldorado convertible? haha. Begin!

[@kemosonicfan123lbp]

+Dee Ray or maybe even invent the world's tiniest diecast working car

[@vaccumsealed]

Kemo_Meme the imagination is endless, but I wanna see a paper car to go with the paper motor

[@stephenaviaspace5056]

This is so nice and efficient! and it does seem it's powered by air. Nice. Now I can build one and put it in my car model and make the wheels run!.

[@mosharrafhossain4093]

Whoah.... awesome. That runs so nice and it is so small. Well done👍👍

[@JentySteP]

When making paper airplanes becomes more than a hobby... This is great man.

[@arctictimberwolf]

You Sir have given Me an idea! Thank you Thank you I Salute you from Wisconsin

[@BeardBQueETX]

Absolutely amazing! In this day and age it is hard to be wowed by things and this thoroughly did that for me!

[@YuriyTistechko]

Очень хорошо! Завидую твоей крепкой нервной системе!

[@KrazeyKraka]

I can see this being sold at the stores in the model kit selection. Very well done!

[@Whataboutit]

Well done! :D

[@jonatassouza7374]

Nice to see you here ;-)

[@enderender9547]

Focusing should not have been the greatest issue with presenting this delicate work.

[@turdhat]

Are you a Neurosurgeon ? You should be if you are not. I can only imagine the steady hands and patience that would take. Far beyond my reach !

[@Digitalfiendscom]

I think the turbo you've got for that engine is a little oversized; gives a new meaning to "blown" V8. :)

[@xznoman]

Hello Japan: please note his timing alignment's off by one tooth and it still works! this is what the world needs

[@nothingssmore]

+xznoman, Actually I just have marked the gears a little bit wrong :)

[@xznoman]

+Aliaksei Zholner :)

[@haley7138]

I saw this on amazing acts of science and my jaw was literally dropped for like a minute. This is amazing.

[@Feltare]

BTW its Outrageous Acts Of Science

[@paulstuartwilson485]

This is, by far, one of the coolest things that I have ever seen!! Bravo!! Keep up the good work!

[@silentjacob98]

How does one develop the patience to build that?

[@progamerzix3117]

Congrats. You are in YOU HAVE BEEN WARNED

[@sasuke-cm8fd]

Lmfao ikr i just got to know about this through you have been warned

[@Trevorr90]

This is probably the most amazing thing I've ever seen

[@SarahSchlongfeel]

I'm amazed by how this little thing sounds. It's so cool.

[@cvanims]

I... can't even fathom the creation of this... wow... o_o

[@nicknaoum7888]

I would be grateful if I had the templets and the instructions for that V8! PLEASE PLEASE PLEASE GIVE ME THE LINK TO THAT WEBSITE!!!

[@VictorF0326]

Unbelievably cool. You made me stop doing my homework.

[@heavenstuna3036]

My hands are normally shaky with details, but looking at this made my hands shake twice as much! (Jeez your hands must be solid as heck)

[@kody914]

That is amazing! Coolest use of paper I've ever seen! Great work!

[@evgen4049]

класс сразу видно откуда руки растут из правильного места.Можете пожалуйста заснять полную сборку мотора попробуйте сделать кпп и мосты думаю будет супер.

[@SIM30NE]

You are amazing, it´s incredible how you can do this, congratulations!

[@gmailgmail012345]

Love from the Capital of Pakistan. Extra Ordinary Work

[@LeonidGeorgos]

Это просто чума. Ты гениален.

[@2Stroke250]

This is so cool, really good craftsmanship.

[@juliankim237]

Excuse me but can you make the template a little bigger?

[@nothingssmore]

it's not so easy to make it properly, because current templates "take into consideration" thickness of printer paper (80 g/m2). So you may try to scale templates up via printing options, but I can not guarantee that everything will work as designed

[@juliankim237]

ok thank you :)

[@kamenshikkamenniy6499]

Мне ОЧЕНЬ нравится микромоделирование. До чёртиков рад, что повстречал Ваше видео про оргАн, в переспективе планирую его повторить.

[@wimheitinga728]

That's really a suprise what came of that egg, didn't expect this. Awesome work! I'd love to see how you made it.

[@landypaule]

This is INSANE!!!! I love it :)

[@SunnyMoonProductions]

Pretty nice, but can you build an alarm-clock brief case?

[@White-pr3tt]

сразу с воздушной системой охлаждения!

[@maclaud4]

This is absolutely insane. Great job m8.

[@sukanyawaghulkar4232]

Which paper is used in this?

[@WillieDWashington]

Absolutely AMAZING!!!

[@PedroHenrique-by5mw]

Waiting for a 6 in line twin turbo version :D

[@RGV2300]

Since every engine run on compressed air, technically there is no advantage of making a turbo, but it could be really cool to see that.

[@sophiahirzel3805]

😵This is so f...ing cool!🌻🌻🌻 Awesome work

[@anoniem9518]

An paper engine running on air.... Wow!

[@JonnyboyCowboy]

Damn listen to that purr! Lmao

[@klyanadkmorr]

Who the fuck takes the time dedication to make something like this OUT OF PAPER!? Why? Baffles me while it is amazing.

[@stevejeffries8523]

he must have really good serious patience to build that

[@bumblebee__]

If you concentrate a bit, it even kinda sounds like a V8 as well

[@JustFun-iz9rf]

that is a work of art. do you show how you made it?

[@nothingssmore]

I have another video - tutorial for assembly of similar, but scaled up model: kzbin.info/www/bejne/oGGWl2lpfJ6gsKs

[@rucarnuts13]

This is amazing! Could you make an instruction booklet on how to make something like this please?

[@utkarshnimje7608]

He has already upload a booklet Check discription of the video in this link kzbin.info/www/bejne/i3rOZaSFg9xjqNE

[@luckysmith8275]

amazing! that must have took a lot of patience and skill

[@rawclaw.x1]

oh that some sweet paper engine sounds

[@TheGreatGamerDude]

You should save up for a 3D printer so you can take your hobby to a new level :D @ 3D printed working car would be awesome :)

[@junaida.1542]

that is amazing and sounds even better

[@Electfried]

Very interesting, should make a rotary once and see how it looks.

[@not_alexander_hamilton]

Will you publish the instructions? This seems really cool and I want to (try) to do this. Congrats for the engine!

[@szilzo8908]

Wow he must have had like 100 hours spare time

[@fs1assignmentdesk141]

Hello, FOX Sports 1 would like to use this video for our online segment @theBuzzer. We cannot embed, but can offer a courtesy. please let us know if we are clear to use and how you would like your courtesy to read.

[@nothingssmore]

+FS1 Assignment Desk Answered in private message

[@fs1assignmentdesk141]

+Aliaksei Zholner I do not see the private message.

[@nothingssmore]

+FS1 Assignment Desk , in my case private messages accessible in Creator Studio -> Community -> Messages

[@Flaviocamisao]

The difference is that you will not use a ballon in the airplane. You will use a simple plastic bottle with compressed air. There is a project in Internet showing how to create a bottle with compressed air.

[@nothingssmore]

Thanks for information and for interest. Unfortunately I have no time for such a projects.

[@Flaviocamisao]

Ok.

[@grzegorzbrzeczyszczykiewic199]

the beginning is impressive only to Europeans. they don't have kinder suprise in US

[@imboss479]

Yes we do lol.

[@grzegorzbrzeczyszczykiewic199]

@@imboss479 oh. but isn't it illegal for you guys to put choking hazard objects in food?

[@zemtsovzheka]

Алексей, тебе нужно оптимизировать видео: теги прописывать более детально, упор на гоночные тематики, турбо там и т.п. тогда видосы будут в разы больше набирать. в названии , в описании тоже получше заморочиться, что писать. видосы оч вирусные, могут намного больше зелететь, соответственно и подписчики и рекламодатели...

[@nothingssmore]

Спасибо за рекомендации, может попробую когда-нибудь. Но у меня особо целей по продвижению канала нет , по крайней мере пока - он так, как дополнение к хобби

[@LacourWave]

Your work is so incredible just continue to do some amizing engine !

[@user-sw2er4bv1r]

still more torque than a honda

[@SlavaVB]

Can you run it to destruction? I want to see how fast it can go before it fails.

[@gtnick86]

Will this fit on my Honda?

[@abhilashraj2653]

Sir what u do is a really impressive so detailed work, I do some work too but not such detailed rather a larger models like the illusionist locket paper version. i would really like to learn from you . And sir you are a master craftsman

[@pauljs75]

Now somebody needs to build a trompe out of a plastic jug and some pvc tubing to provide the compressed air to run one of these. Then turn a home-made dynamo using speaker-wire and magnets, and have it power a single LED. If somebody does a whole video sequence of that, they really should post it on KZbin and soak up the views. (And probably reply to this comment, so I can watch.)

[@paddydoestech]

pauljs75 I shall do tgat

[@pauljs75]

Cool beans. Do post a link when it happens! It could be one of those epic, yet random, build-sequence videos. :)

[@calcmandan]

Top notch work you have done with your videos. I bow to your handiness. Have you calculated the power output of the motor with the standard balloon as the supply? If you built a paper car, would that motor be capable of turning the wheel with forward locomotion? It would be super cool to see you do this and place the car on a little circular track as a demonstration. I would be totally interested in mimicing your work if that were done.

[@MayankPrakash]

I bow to you sir. Hats off.

[@grentchell0862]

On the template of this engine, do i cut along the solid lines and fold the dotted lines?

[@aidanalz4300]

Any tips for making the gears I’m having trouble

[@artbox914]

I see you in show( you have been warned )incredible

[@AttractionAttack]

I notice all of your engine cylinders are perfectly circular. How did you achieve this with only A4 paper of 80g/m^2?

[@nothingssmore]

The thing is paper should be shaped correctly before glueing, i.e. initially cylinder should be rolled with help of some kind of (metal) rod, and then it should be enough only apply couple of drops of superglue to hold it

[@immortallegends5360]

Aliaksei Zholner How loud is the engine? I'm making a RC 1969 Dodge Charger, and I've been surfing for some engines I could make to put inside to give it a unique spin. And this thing sounds amazing, and I think I could easily adjust it to be driven by an electric engine; but I'm concerned I won't really be able to hear it once it's inside the car.... But 10/10, that's amazing man!

[@crimsonscull]

not to be that guy, but 4 stroke engines have their camshafts operate at half speed of the crankshaft. unless you have a 2 stroke, which not that many were produced and also considering the lack of air scavenging on the cams, i don't think this peice would fit production. other than that, pretty nice model

[@harryshilley2446]

I think this is absolutely amazing! I am a huge fan of paper craft, and origami, and was wondering how do you make this? I would very much like to have a go myself. Keep up the awesome work!

[@Samch365]

Hello Can i get acsess to the plans?

[@nothingssmore]

fixed shared link, please check again

[@onlinehelper374]

See in description

[@CrispySkinwalker]

more horsepower than a honda

[@DrTubeman]

Looks like there's been some time put into making it, great for low carbon emission!

[@user-yw5sw8yo8x]

この中に日本の方いますかー？

[@chayniksfunkcieyjopa]

Да.

[@user-nm1ix9ej8x]

@@chayniksfunkcieyjopa нет.

[@chayniksfunkcieyjopa]

@@user-nm1ix9ej8x нет, блин, мемная мамка

[@Daniel-yn7qc]

Great engine. Where can I download the files?

[@oldhandsanitizer6990]

And how do u make it my guy?

[@v_alexiadis]

You are an artist.

[@garbagecollector2281]

How does the paper not break from that much energy and movement? I would assume it would tear some of the joins up. What kind of paper are you using?

[@nothingssmore]

+Dump Hole, it is regular office paper, but as Gearz Pop mentioned, it is covered with superglue somewhere to get stronger

[@meady200]

That's what I thought - astounding how well it copes, even at such high speeds. Especially given the tolerances must be tiny for it to function properly. The man is a God among model makers.

[@nothingssmore]

+meady200, thank you :) But trust me, I'm very far from best paper model makers, and here are couple of proofs (all of these are from paper with some additions of other materials for decoration or functioning): i83.fastpic.ru/big/2016/1024/e4/72bc0e2c7a0530ccaa18537ce774f4e4.jpg i83.fastpic.ru/big/2016/1031/87/a61bae7aa95cd70f1f615950a4de0a87.jpg only-paper.ru/_fr/169/7402563.jpg s02.radikal.ru/i175/1106/7c/96083882119d.jpg kzbin.info/www/bejne/hoPFdoOjYqd3eqM

[@DeadPixelWarThunderAllDay]

Will it fit in my honda?

[@TeamMayku]

Oh wow! I don't know how we'll it'd hold up to internal combustion though...

[@ewiem4351]

Can it run faster on nitrous gas from a whipped cream can?