1973-79 Ford F-Series & 1978-79 Ford Bronco Evaporator Kit Installation

[@mitchphillips2431]

This is a remarkable and comprehensive demonstration of product installation, its a recipe for success and very impressive.

[@gregmckee951]

This is the best instructional video of all time, you are the man Billy. I can’t wait to install my kit on a 1978 F250 4x4 non Factory AC. It is one job that will be worth the effort. Thanks Billy and Vintage air.

[@MaquinasDePalomitas]

How lengthy is the install?? I’ve had the kit sitting for a couple months now and thinking of waiting til the summer to tackle it (1973 f100).

[@kegger66]

Excellent video, Billy did a great job !

[@MaquinasDePalomitas]

After having the kit for over 2 years I finally started tackling it yesterday, almost done with the removal!!

[@calevel]

A very detailed video installation by a true professional. Thumbs way up!! I will be doing this on my 79 Bronco some day in the future. I will get back to this. Thank you 🙏!

[@BobRomine]

Thanks Billy, couldn't of done it without this video, might be the toughest of Vintage Air Systems I have ever installed.

[@diegoloera435]

Damn this guy’s phenomenal. Props to you and your guys. Hope ya’ll are doing well.

[@OperationRV]

Great vid as well as detail. I'll definitely be using this when I install mine.

[@robertfogarty3253]

great job boy do i need this upgrade for my 77 f250

[@chrisdeason4904]

Mate your a very good communicator...

[@aguilareal6537]

I like 👍 good job 👏🏼

[@treylyde999]

Just wow!

[@pnwchris2000]

Are all the A/C Compressors the same in your kit with the compressor bracket being the differentiator? I have a Ford Modular Engine from a 2001 Lincoln Navigator swapped into my truck and I don’t mind making a custom compressor bracket as long as the compressor would still work for my truck. You also mentioned a auxiliary switch option on your climate control panel given within the kit, I have a custom back wall on my cab that uses a powered slide down Crewmax Tundra rear window. Would I be able to put my up and down window switch in your control panel in that auxiliary spot?

[@Belowtheprairie]

Can you guys do a video on the 67-72 Chevy trucks with out factory air?

[@adrianacosta7908]

Hi i like this system. But my truck dose not have factory AC my truck is 1976 f100 custom so mine does not have the big evaporator housing all i have is the blower motor there i do not have the big hole ao how does it mount?

[@va197653]

The evap. unit will mount to the firewall inside the cabin, this kit will include the firewall plate used for the 76 f-100's w/o factory air, So even though the truck didn't originally have the AC provisions at the firewall and core support our kit will have all the components needed to mount the evap. in this cabin.If you wanted to see the install instructions for this kit please visit our website www.vintageair.com then type 751160 into the search bar and the instructions will pop up.

[@adrianacosta7908]

@@va197653 thank you for your reply. I really like this system for my truck looks like it is an easy install.

[@treylyde999]

@@adrianacosta7908 the definition of Pro is making something that’s hard, look easy.

[@Opt1musPryor]

Where can I buy louvre hose adapters to fit 1978 Ford F150?

[@danderson9881]

right on, and a good Vid.

[@mikesskyranch]

Hey Billy, can I fly you into San Diego to install mine on my 76 Ford truck non-air-conditioning 390 engine… Cab is completely empty..dash is off …I think you need a vacation in San Diego… Lol

[@treylyde999]

Genius Do you mind giving a ball park about how much this job is or was. I recently had heater core and fan replaced and it was around 1400. What do you think

[@va197653]

We do not perform installs for the public, this was an inhouse install but if asking on how long it would take to install this unit you could expect to spend 20-25 hrs for the complete install and most shops labor rate is $75-125 an hr.

[@joserios3750]

Where can I jet the kit my project is a 1973 f250

[@va197653]

For orders within the U.S you can order directly from our sales team, they can be reached at 210-654-7171 or [e-mail] for orders outside the U.S you would use one of our international dealers.

[@billwainwright9860]

Where can I buy the Lovered vent covers?

[@billwainwright9860]

1977 F150

[@charleshollingsworth1583]

Great video what is the price of this system

[@va197653]

the price for the complete AC kit is $1580.00 + tax/shipping

[@va197653]

This pricing was correct at 11.01.21 but pricing is subject to change please visit our website (www.vintageair.com) for current pricing

[@gilbertquintero7396]

Where are you located at?

[@va197653]

Vintage Air, Inc. 18865 Goll St San Antonio, TX 78266 Toll Free: 1-800-862-6658 Telephone: [phone]

[@leytonwarren5660]

Would this kit still work on a 1978 bronco with a 460?

[@va197653]

The evaporator install will be the same but you would need to get a comp. bracket for the BBF, when ordering the kit we can substitute the SBF comp. bracket for the BBF comp. bracket.So yes this kit will work for a 78' Bronco w/ a big block ford (with bracket substitution)

[@stevesparks7340]

automatic trans remove dipstick tube

[@darrenanderson7969]

Can you please just do mine for me? I'm gonna screw this up BIG TIME!!!!

[@joeschlotthauer840]

How much is it...

[@va197653]

The complete kit will cost $1825.00

[@va197653]

as of 2.01.22 this is the correct pricing, but it is subject to change please visit our website www.vintageair.com for the current pricing

[@catmendo2]

I see u already ruined the bezel by breaking the mounting screw holes out :)