Vacuum pump valve repair kit on Volvo D4, D5. P3 Platform

2015 XC70 D4. Repairing vacuum pump valve.
Original valve - 31430964
Rebuild membrane:
www.ebay.com/i...
Great KZbin channel on XC70 Repairs:
/ uehal999 or search uehal999

[@volvosweden]

Excellent XC70 Repair channel. kzbin.info

[@PeeJouni]

Thanks from Finland also! Did the repair in 20 minutes and I was able to do it without taking the battery holding off. The Volvo experts couldnt help and this was new info for them.

[@miikaheiskanen6735]

Oliko autossa muita oireita kuin tuo ääni?

[@PeeJouni]

@@miikaheiskanen6735 Ei mitään muuta oiretta, eikä ole venttiilin vaihtamisen jälkeen ollut. Oli mukava kun ensin tehtiin venttilinnostinremppa, jolla piti korjaantua.

[@trancegsi]

What size torx I can't get to screw, what did you use for such a tight space without taking battery off , no way 20 minutes.

[@PeeJouni]

@@trancegsi Battery off clearly, but not the battery holding.

[@miguelazevedo9300]

This is also a useful video for XC60 D3. I had the same trouble and it was hard to find the source of that noise. Gladly I have found it and it's an easy repair, 70€ instead of the 1000€ that dealers want, saying they have to change the whole EGR valve and gain some money with the distracted ones.

[@hanyuan666]

Thanks again so much for this Video. On my XC70 2013 with D5244T15 Motor it was definetely this small valve, where the membrane is broken. This makes the strange sound and also the EGR control flap clappering. This small valve is about 80 to 90 € in Germany. I now did order 2 of these after market membranes from Russia for 30 € each, wich hopefully will arrive in November, that I can repair it soon. Thanks to your video the replacement procedure is very easy. 👍

[@mustafahato3404]

Hallo Bitte Können Sie mich antworten auf die Probleme ich möchte nur Fragen danke

[@JoniUkr]

Thank you VERY much for this simple, but VERY effective solution. for D5. The engine sounds so much better and makes it more pleasurable to drive . I also replaced transmission, front, rear diff and haldex oils... Everything runs like new! Spasiba bolshoi!

[@Coastersbricks]

Thank you for your video, it helped me a lot to mount the new valve. Mine was completely destroyed! there was only the central part of the orange membrane left... given the staggering price that Volvo sells the repair kit (100€), I ordered one on Aliexpress and I got the complete kit for 3.5 €!!!

[@sammyt.3607]

no way ! and it works like the original ? wow

[@Coastersbricks]

@@sammyt.3607 I did it in January last year, almost 20,000 km, and I no longer have any problems having done this…

[@mathiasengberg1881]

fantastic! now i can fix my problem that my volvodealer did not found. thanks from stockholm sweden.

[@Peter-qo7uz]

Just did mine on XC70 P3 D5244T17. Remove air box (screws PH and TX25, socket 7mm or flathead for MAF removal) Remove bottom part of air box - clean it afterwards There is just enough room for the valve removal with battery box untouched - just use TX25 and small socket driver. Bought replacement on Ali, was very cheap, but I used only the membrane. Dont believe in longevity of the plastic body. My membrane was completely torn apart, so I am glad I replaced it. After the change the brake pedal feels bit stiffer, probably due to the vacuum regulator now working. There is less vacuum, but it will last longer. I did not have such big problem with the noise, but it could be heard sometimes.

[@hanyuan666]

Trank you for this Video from Germany. I have the Same Noise since about 2 weeks ago. Sounds like a Fish-trawler. I knew it has something to do with the vacuum pump System and tried to locate the failure by pressing vacuum-hoses with My fingers. Found out it disappears, when pressing the hose Connected to the plastic control valve that actuates the EGR-flap. It also dissappears when the magnetic valve between vacuum-pump and Control-valve is actuated from time to time. That is the reason why sometimes the noise is there and sometimes not. Until now I suspected the membrane of this valve to be broken. But now your Video gave me another helpfull hint what the failure may be.

[@vffa]

Hast du die Reparatur wie im Video durchgeführt? Wenn ja, hat es geholfen? Habe selber entweder die Kurbelgehäuseentlüftung (weil Öl im Bereich Ölfilter Übergang zum Ansaugrohr) oder eben die Vakuumpumpe im Verdacht. Wie genau bist du beim testen des Vakuum system vorgegangen?

[@theyufuu]

It worked in my xc60 d5 as well. The rubber was broken and changed with the new one and noise disappeared. Many thanks.

[@MrNeutross]

I checked out his channel. Looks like a lot of really valuable info. The headlight restoration was amazing! Waay better than any polishing I've ever seen. Maybe you could talk to him and ask if someone could translate the videos, haha

[@sammyt.3607]

can you give me link for the video ? cannot find it

[@ritchie799]

A very well detailed video with clear and easy steps to follow. Thank you again for more Volvo information.

[@sillysodus0]

Had same noise from my car, so decided to buy valve from volvo, almost 80 euro, removing air box gave plenty room to fit, problem now fixed, so we'll worth the money, GREAT video, I would have went to volvo garage at great expense if I did not see this

[@trancegsi]

Did you leave the battery in ? My s60 D5 just started 2 days ago intermittently but 70% of the time..touch brakes and goes for a short while.😮

[@sillysodus0]

Did not remove battery, once air filter housing was removed I could see and move enough

[@trancegsi]

@@sillysodus0 great cheers. I'm on holiday was thinking of doing it hear if easy, there's some tools lying about . If not I'll do it when home

[@JamesOStanworth-Wang]

Thanks for the great videos. Thanks, too, for creating them in English. Good pointer to another resource too! :D

[@sammyt.3607]

Thanx for the valuable info ! will follow for more great fixes !

[@f1ification]

Good job, but I have done the same work twice, because after installation the issue came back, second time I've added inside the vacuum pump small plastic washer that was fixed vacuum valve in assembled position all the time. Only adding plastic washer tickness about 3 mm have solved a problem. Actually, original rubber membrane was in perfect shape and I didn't replace, when cheap aftermarket membrane was ordered as well 😁

[@juho.piironen]

Hi, did you add the plastic washer under or over the membrane?

[@f1ification]

@juho.piironen Hi, I added a plastic washer inside the vacuum pump. So, before installation of the valve, input plastic washer with similar diametr, 3-4 mm height. Then install valve. In this case, the valve will be fixed by this plastic washer.

[@chocolateboooy]

Evgeni spasiba I had the same problem but thanks to you I solved it

[@focus678]

It is also installed in my 2012 D3 engine which is the same engine.

[@elnekave52]

טוב לדעת. רק מה... הרעש של מנועי דיזל הורג אותי....יישר כוח על המידע.

[@karolzabielski]

Hi, Can you talk to your Russian Friend to make a useful modification for DPF regeneration on 2.4 D5/D4 P3 engines? I installed by myself the LED with the resistor to the glow plug to know when the DPF is regenerated. The light from the LED informs me about the working glow plugs. During the regeneration of DPF, the glow plugs are running, LED are lighting and this way I know not to turn off the engine so that the regeneration comes to the end. I installed the red LED by the dashboard on A pillar. Also you can take a power from the wire of the glow plug module. I think it would be a useful thing for D5 users and on your channel this information will reach more users. led 3.6V and 480ohm or 1.6V 980ohm. Fuse 1A. I have been using my idea for 2 months so far and it is doing great job. No any foults or errors after instalation LED.

[@szittyakurt]

Wow, nice that is definetely useful. Do you know or can you test if regeneration doesnt take place at a certain fuel level? I think i read somewhere that it does not regenerate below 1/4 fuel level, but couldnt find information about this in vida.

[@karolzabielski]

@@szittyakurt No matter what the fuel level is. Regeneration takes place anyway. You only need 1/4 tank when you do computer regeneration. Tested on my d5. In My case regeneration take Place Every 1900km in winter or 900km in the Sommer. Winter diesel have less bio components if Im right. Glow plugs heating up up to 12mins after star cold engine.

[@szittyakurt]

@@karolzabielski thank you very much

[@the_dovla]

You can know when your vehicle is in regeneration mode without that indicators, just watch consumption when vehicle is stationary. In P or N consumption increase about 1.5-1.8l per hour... When the consumption back to 0.5-0.8 regeneration is over.

[@CARRJ142]

Another great video.

[@Volvoxc70SWE]

Great video! Thank you so much👍

[@augustbage]

Thanks!

[@robertasviskupaitis9195]

awesome video! I have same issue

[@peterclifton6312]

Great video very informative thanks 🙏

[@masterboy25]

Is there a chance to give new link or part number of Rebuild membrane. The link that you gave is no longer correct. Is it possible to buy only the plastic mesh? Thank you.

[@JavierGallero]

Thanks so much for this video! Just discovered my XC60 D5 is making the same noise and I am far away from home. How quickly should I get this problem fixed? Would you ride 1300 km with a defect vacuum pump valve? Besides the noise the car just works as usual...

[@АлександрГлафиров]

Спасибо .Все это можно сделать без снятие аккумулятора и пластика,получаеться в разы быстрее

[@volvosweden]

Снимали для лучшей съемки видео. Спасибо

[@JaySingh-ex6xc]

Hi there, Can I ask if I would have this on a D5 2008 XC70 ? Thank you.

[@Dalbayob69]

So I’m guessing that it’s possible to do the repair for free? Just by removing valve and making sure the plastic mesh is put back in place. My car is making this noise, will hve to try this out.

[@volvosweden]

You could. And test the rubber membrane at the same time.

[@Peter-qo7uz]

My membrane was torn apart. While making effort to disassemble everything, the price of membrane is nothing, if you buy from alternative source (not from dealer). Better to have it ready for replacement.

[@Graciousdude]

Thanks for the video! My valve plastic housing was completely loose (The black part with the nipple on it). And I have alot of oil leakage around that spot. Can this be the source of the oil leak?

[@jennedegroote9320]

Does this also cause more oil usage because I have to add 1 liter of motoroil every 2 weeks that's not normal

[@vffa]

If the Crankcase Ventilation system can not release the pressure from the crankcase, you are likely to consume more oil through 1) The ventilation itself, leading to the intake hose 2) The piston rings 3)The turbocharger as, the turbo cannot make to oil from the return pipe go back into the engine if there is back pressure (this can also damage the turbo quite quickly, resulting in a little whistle or rattling noise like letting rice fall on a thin metal plate, but muffled) 4) overpressure in the crankcase makes oil leak from every hole and also "not-hole". Overpressure in the crankcase, caused by a faulty vacuum line is quite the problem and may reduce the engine life.

[@milczarkus]

Hello. Today i changed part 31430964. Few minutes after replacing everything seems to be good. But after 15 minutes when i pressed gas pedal, this sound was comming back but not that much like before changed this part. Do You have some idea what is the problem? Regards

[@juho.piironen]

Did you ever solve this?

[@rameshhm4746]

Nice and very intricate observation dude!!! Thanks for sharing. Is this the same for D5 AWD engine in 2011 XC 60's

[@volvosweden]

Should be the same

[@닥공-d3e]

I can't read the Russian. In the uehal999 channel, is there a video for the front hub bearing replacement? Or in any other youtube channel?

[@STK34761]

Why you don't add D3 engine in tittle ? Compatible with vacuum pumps: 31258031 31375107 Compatible motors: D5204T3 D5204T7 D5244T11 D5244T15 D5244T17 The vacuum pump was installed on: VOLVO XC70 2008- VOLVO XC60 -2017 VOLVO S80 2007- VOLVO S60 2011-2018 VOLVO S60 XC -2018 VOLVO V70 2008- VOLVO V60 2011-2018 VOLVO V60 XC -2018 VOLVO V40 2013- VOLVO V40 XC

[@Yamalover78]

Thanks Ebay link in not working

[@mohamedmahfouz1404]

My xc70, d5, 215 hp, 2012, 127000 km consumes 1 litre oil every 2000 km, official volvo service worker advice me to change from castrol 0w30 to castrol 5w30! What's your advice in such situation?

[@Peter-qo7uz]

Thicker oil is not solution for your problem. If it is not leaking outside (you would see), it is being burnt by engine. Most probably piston rings or scratched cylinder wall. If it is the piston rings, I would try engine cleaner (I use BG EPR). If it does not help, the only next step I see a visit to repair shop to investigate deeper, probably more expensive solution.

[@vffa]

So hard to find any info on the Euro 5 diesels (D5=215HP). Really annoying that there is tons of info for the Euro 4 and 3 but basically nothing for the Euro 5

[@t-banan]

Its the same

[@vffa]

@@t-banan except it isn't in many many ways. We have both the 185bhp 2006 D5 and a 2011 215BHP D5. They are vastly different engines in terms of what components they use and what does what and goes where.

[@avallox4740]

Hello. Can you tell me what could be wrong. Engine code 129

[@2004tadas]

Just to be clear, was it the ticking noise or was it vacuum pump noise? My V40, D4, 5 cylinder has like a vac pump noise inside the car, but engine sound good when listening outside under the bonnet.

[@volvosweden]

Ticking of the EGR flap due to failed vacuum pump valve

[@evgenykosourov5958]

if you turn off the air conditioner, does the noice in the cabin disappear?

[@JaySingh-ex6xc]

Hi Yuri I don't suppose you know the correct Volvo part number please or can you get hold of them rubber parts ? Thank you. Jay. U.K.

[@volvosweden]

Will add once I have a link. Thx Jay

[@suderpictures]

Did you change your XC70?

[@volvosweden]

Its my friends XC70 D4 in Russia

[@eugen4715]

Вечер добрый.а когда будут ролики на русс.языке!?

[@volvosweden]

Есть и на Русском посмотрите на канале

[@marcinjaworski6249]

?

[@АгзамАскарходжаев-о8й]

А где версия на русском

[@evgenykosourov5958]

kzbin.info/www/bejne/aqe0doN-jJqpa5o