Dodge Challenger airbag clock spring replacement video nr.8

[@whitheredfn9854]

Did you have to calibrate the angle sensor?

[@dannyclay4290]

Why did replace the clock spring?

[@rodriguezj661]

Question: Why did u remove the steering wheel clock spring in the first place?

[@valeriumoscalu7580]

Because the clock spring were damaged after explosion!

[@valeriumoscalu7580]

No cruise control, turn signal lights blinking, horn honking, alarm turning on by itself, the problem with cruise control were because of bad clock spring the rest of the problems because of bad body control module!

[@rodriguezj661]

@@valeriumoscalu7580 thank u for your response. I purchased a Dodge Charger but the car was involved in an accident (prior owner). Still clean title. All the buttons, horn work however the Airbag was deployed and burnt the two adapters on the clock spring (light blue and yellow). My airbag light is on my dashboard. I recently purchased a used clock spring and a new airbag module. Do u think this will fix my light on the dash? Will I have to reset it after I replace these two parts? Excuse my ignorance.

[@valeriumoscalu7580]

After you will install them you will need to reset the srs airbag module and the light will go off!

[@valeriumoscalu7580]

Also depends what year, on old ones you can use a regular one scanner and dellete the errors on the new ones you need to reset srs module!

[@Wolfeye1978]

عمل جيد ... شكرا

[@muthagoose69]

Well done!

[@valeriumoscalu7580]

Thanks👨🏼‍🔧

[@valeriimoscalu8794]

Прима датэ вэд машинэ ку коборыре прин багаж

[@valeriumoscalu7580]

😅😅🤷🏻‍♂️