How to remove SRS Airbag Control Module & Seat Belts on a Dodge Challenger | MyAirbags

[@briannipper2209]

Recently ran off the road and driver and passenger airbags deployed. Trying to decide if I want to take on the project. Your video is great. It’s a 2019 challenger. Car starts but won’t shift out of park. Does the deployed airbags result in not being able to shift out of park?

[@MyAirbags]

The car should still get out of park.

[@suqmuhdiq2779]

What kind of seat belt is that. I’m having trouble picking the type

[@MyAirbags]

This model was a dual stage seat belt. You can tell by looking at the wire plugs. 1 plug - single stage. 2 - dual stage. 3 - triple stage seat belt.

[@Adonisfilms876]

Awesome, whats the cost for reprogramming a 2015 Dodge Charger RT Airbag Module?

[@MyAirbags]

Adonis, If the car was in an accident, we can reset the module. You can enter the make, model and year here: www.myairbags.com

[@danthegreat7590]

Have a question will the airbags adn or seatbelts go off after the change of new ones and how would I prevent this from happening

[@MyAirbags]

Please make sure to first disconnect the battery. Then the airbag control module needs to be bolted down with all bolts before reconnecting the battery.

[@kamalsabbar1651]

What is the treatment for the B1701 Sonata 2007/6 cylinder error code please

[@MyAirbags]

Kamal, B1701 on your Hyundai Sonata means "open or increased resistance in Driver Buckle pretensioner " 1-It could just be a poor contact in the connector or wiring harness. Make sure its plugged in and the wiring harness is not damaged/cut anywhere. 2-If all looks good with connection then it could be the actual seat belt pretensioner. To test the pretensioner, watch our video "How to: Test seat belt good or bad" here: help.myairbags.com/hc/en-us/articles/115012919107-MyAirbags-How-To-Test-a-Seat-Belt- Please let us know the result?

[@kamalsabbar1651]

@@MyAirbags I will inform you of the result as soon as possible and thank you very much for your high interest in our question.

[@MyAirbags]

@Kamal, Perfect. Thank you.

[@uptownphiladelphia]

I’ve head the modules on these reset them selves

[@MyAirbags]

uptownphiladelphia, Yes on some Chrysler made modules, this is the case! What car did you have?

[@jonpierce1553]

1/4 ratchet with a 10mm swivel worked like a charm!

[@beethasb]

Even if the module got wet can you still reprogram it?

[@MyAirbags]

No it needs to be replaced. Get your original part number that is on the airbag control module and look for replacement on eBay.com or MyAirbags.com

[@iqthunder1]

Thank you for the well informative video. I own a used 2014 challenger, I know an airbag was deployed in a minor accident in the past. The previous owner said it was replaced, and programmed accordingly. But I've been suspicious, so my question is.. Is there any other way to turn off the airbag light without fixing its system? Maybe by some illegal programming? Ps. We don't have an authorized Dodge service shop in my country.

[@MyAirbags]

Bilal, The airbag system has to be completely functional in order for the light to go off. It should function as designed.

[@iqthunder1]

@@MyAirbags Thank you ❤❤

[@jmomonmomon2308]

If I put new seat in my 2019 will it deploy if I reprogram the

[@jmomonmomon2308]

If I put new seats in my 2019 challenger will they deploy if I don't reset the module

[@abnerramirez2473]

I accidentally removed the 10amp fuse in the back trunk, i got a airbag light, what should i do? (2016 dodge challenger shaker rt) please help, thanks. Car was not in an accident!

[@MyAirbags]

You can use a diagnostic scan tool to clear the code. For most Ford and GM vehicles it will auto clear itself. But for other vehicles it needs a scanner to clear the code.

[@3silver4beast59]

I swapped my seat on my 2015 charger with other suede factory seats plugged everything up and the airbag light wont go away My car was not in accident either. How can i fix this?

[@MyAirbags]

3Silver4Beast5, If the light is on for an unknown reason, I would recommend, hooking up a scanner/scan tool up to the OBD port and reading the airbag trouble codes. Diagnosing the light would help us narrow down the issue. You can always reply here with the codes or head over to our online HELP Center and type in the code there: www.myairbags.com

[@hugodealba9424]

How can you tell if the buckle is deployed ?

[@MyAirbags]

Hugo De Alba, Great question! Heres an article with pictures from our Help Center: help.myairbags.com/hc/en-us/articles/115011750647-Do-you-repair-rebuild-buckles- Theres a few ways to tell. Not all cars have buckles that deploy. Some cars its just the seat belt pretensioners, while others its just the buckles. Some cars are equipped with both that can deploy. One way is you will get a trouble code on your scan tool that will tell you its deployed. Another way is too look at the buckle and see if its been deployed and pulled down like an accordion. Please let us know if you still have any others questions. We are very happy to help!

[@javiercalderon7930]

I need to replace the front impact sensor on 2015 challenger do you know where its located?

[@MyAirbags]

Javier, on that vehicle, it should be on the radiator support. Theres an article on this one in our MyAirbags.com Help Center: myairbags.zendesk.com/hc/en-us/articles/360001391787-How-to-Change-SRS-Impact-Sensors

[@Adonisfilms876]

Its super hard to get to those two bolts in the back

[@MyAirbags]

Adonis, yes indeed. Those were one of the more challenging ones I've done

[@hugodealba9424]

Is it the same spot for a 2013 too?

[@MyAirbags]

Hugo, it might be slightly different for the 2013 model but this video should help with the overall process. If you need the module reset and/or the seatbelts rebuilt, we can help with that: www.myairbags.com

[@oscarontiveros5117]

Is this similar for 2017 chrysler 300

[@MyAirbags]

Oscar, if the 300 has a similar interior / center console setup, it will be similar process. If you need reset you can start here: www.myairbags.com/

[@crying_hippy]

My bud bought 2014 challenger, passenger seat lower lumbar airbag in seat is pushing out at max and hurts the back, we can't find a switch to control the airbag in back of seat Driver seat has a button and lil knob, I asked him if there is a second switch for passenger bag and he said no So where is the airbag switch for passenger side, it has the airbag tag on side of seat so it's in there Thanks in Advance

[@MyAirbags]

Crying Hippy , I'm sorry, we dont have any experience in lumbar support controls

[@crying_hippy]

My Airbags thanks Eli

[@Chriselectricfingers]

Were is the module on charger srt8 14 ?

[@MyAirbags]

It is under the radio on the floor. You can also use this link for help www.myairbags.com/srs-airbag-control-module-location-lookup/

[@slimr.6750]

Wait dont skip that part. I need to see how you got those screws out the back of the module. Thats a cramped space

[@MyAirbags]

Slim R.,My apologies. We edit the screw removal part to shorten the length time. I hope the rest of the video was helpful to your needs.

[@jaybraun7471]

ye its nearly impossible thats why they didnt show it!!

[@jaybraun7471]

@@MyAirbags It took more time to unscrew the back screw than to take apart the whole console. Why wouldn't you be a little more transparent and just say its very difficult?

[@chupposity]

I ended up cutting that top cover to get access to the back bolts - that and a 10mm 1/4" drive with a swivel and extension. This design is terrible for service though I'm sure its super easy at the factory before the dash is installed! Also if the dash needs replaced due to passenger airbag being deployed that is probably the right time to remove this module.

[@SrtJoe]

What about the charger

[@MyAirbags]

Taz, the Dodge Charger module should be in the same spot under the console, on floor. We haven't produced a video how to get to it yet, but if you watch this video, it should be helpful in getting a good idea on how to get to the module in your Charger. Make sure you disconnect the battery cables anytime you work with the airbag system. Please let us know how different or similar it was to get to the module? and of course, if the car was in an accident and you need to get it reset instead of buying new: check out out airbag module reset service: www.myairbags.com/product-category/repair-return/airbag-module-reset/

[@gpaulwelch7127]

Where is it in 2011 nissan pathfinder

[@MyAirbags]

Paul, On that model, its directly under the radio console, all the way on floor. There are panels to the right of the pedals that come off and should see it right away. Its the metallic box with a orange sticker on top of it - bolted to the floor.

[@kamalsabbar1651]

Reason code p1701 huyndai sonata 2007 v6

[@kamalsabbar1651]

Sory B1701

[@MyAirbags]

Kamal, B1701 on your Hyundai Sonata is "open or increased resistance in Driver Buckle pretensioner " 1-It could just be a poor contact in the connector or wiring harness. Make sure its plugged in and the wiring harness is not damaged/cut anywhere. 2-If all looks good with connection then it could be the actual seat belt pretensioner. To test the pretensioner, watch our video "How to: Test seat belt good or bad" here: help.myairbags.com/hc/en-us/articles/115012919107-MyAirbags-How-To-Test-a-Seat-Belt- Please let us know the result?

[@MyAirbags]

If it is a bad pretensioner, we help you. We can professionally rebuild the seat belt pretensioner and buckles too. Please let us know the result?

[@10percent48]

How can we contact you

[@MyAirbags]

Our website is myairbags.com or you can call/text us at 855-770-4055

[@mbkey6759]

🤝

[@mbkey6759]

👍👍

[@MyAirbags]

@Mb Key Thank you, We are glad it helped!