Valken V12 Ares AM-013 Installation

[@dctmatt]

Man, I really wish you guys still made these :(

[@luke4421]

Can you see the LED from the Trigger RoF system on the Ares Amoeba?

[@DuckOnASkateboard]

I'm just wondering if you can change the charging handle out for a different one... Not for a Valken engine, but just changing the charging handle.

[@DaPiggyGaming]

+ValkenVideo hi there, does it just take normal lipos?

[@kingjon120]

does the AM-013 gear box fit inside a Valken battle machien and work?

[@ethanbarrile7172]

can u guys show a vid on how to install one in the krytac m4

[@slayo710]

If I ever wanted an airsoft, I would get this... But valken, I gotta say. I like you so much more for your paintball gear.

[@dan12345595]

if my gun has an Ambidextrous Fire Selector will i be able to install it or would i need a new fire selector?

[@ryan-bl9tb]

Does that nozzle come with the valken v12?

[@johncrowe901]

Does it come with the qd fitting

[@aidenu8660]

My Valken is curving down at 20-25 feet and I've adjusted the hop up all the way up and nothing has happened. Do you know what's wrong with it?

[@LiveFreeOrRIP]

+Savages Speedsoft Pull the hop/barrel Out of the guns upper and look down the barrel with light at the end. Then try to ajust the hop off and all the way on..IF you see the bucking move into the barrel evenly then you are getting hop. If you removed the barrel at anytime there is a Nub that sits on the arm of the hop unit that presses down on the bucking to add hop. It CAN be lost if you removed the barrel. if all of this checks out fine Next step I would do is check your alignment. 100% UNLOAD everything... Then take a flashlight and shine it up into the hop feed port and Look down the barrel. PUT ON SHOP glasses!!! Check to see if the air nozzle is centered in the hop up. You will get a clear good picture if you shine the light right. If its off centered that can cause lots of issues. Although v2 is v2 some have small amounts of difference and can cause improper alignment of the system. Thats why in most cases its good to use the existing gearbox so you know the fit is correct.

[@greynacho5196]

Why are you guys discontinuing the V12? It was my favorite.

[@nearbyrabbit6884]

Nacho Airsoft polarstar had too many complaints that it was a copy of one of their engines

[@MicrosoftHoneydew]

Any idea if it will work with a polarstar fusion on the micro amoeba?

[@dctmatt]

Simon Galas would be the exact same installation

[@airsoftghillie3370]

It sure does look cool but I would only buy one if it was longer.

[@jakefair9067]

please do a v12 installation video in a valken battlemachine mod l/m

[@twist_tm6329]

The Sexual it’s a drop in

[@ollenberger4]

its the same steps for any amoeba right?>

[@chrissyrett673]

Jared Ollenberger no. Only the collapsible stock versions use the same steps. I have an Amoeba CCR which is from Ares's Amoeba Machine Pistol series and I'm not sure if it is possible to have an HPA Drop In for the Machine Pistol Series AKA CC series

[@majky-fantomas]

Can i fit it inside ares m4a1 full metal lower?

[@LuxR6]

Majker Alex Majkrak they will usually fit in most m4 style v2 standard bodies but depending on some you may need to do modifications to the lower or the v12

[@ueigerchaves5726]

all this, To be the same thing as AEG stock gearbox?

[@Nicomonnn]

Are u stupid? Lmao

[@hutchworship]

its rps is 20 with an 11.1 so why hpa?

[@LexusTX]

Less moving parts and you can double that ROF and won't damage gearbox

[@jacobc2313]

That’s stock rof u can easily tune to 50rps with the engine maxing at 60

[@nathanbernheimer3093]

if you haven't already, will you sell the gearbox?

[@nearbyrabbit6884]

Nathan Bernheimer I’ll sell you one but it’s dissasembled and I have the motor

[@frederikbgelund2499]

yay... you made it 40fps slower!

[@chrissyrett673]

Frederik Bøgelund wow, its not like you can change nozzles.

[@lucasmcgrew4019]

Frederik Bøgelund If you paid attention to detail you would've seen he used .25

[@tilligetbig]

340fps + 40fps (to conpensate for thos .05 grams = about 380fps... that is with the black stock nozle

[@jacobc2313]

And if your decent and upgrading FPS doesn’t contribute to range

[@Gattobuono]

Ummm, you forgot to replace the body pin that runs through just above the trigger :-)

[@C00KI3xM0NST3Rx]

That's where the LED for programming is seen.

[@Gattobuono]

C00KI3xM0NST3Rx Okay, so with that particular gearbox you're minus the body pin, I see, thanks. :-)

[@chosh3637]

Those guns break to easily

[@masongt6546]

How so fast

[@ValkenVideo]

Innovation

[@momo.ru-kun]

Man, all this stuff just to downgrade an already better stock gearbox, why???

[@joeruggiero59]

Alvin Capalad its not about the fps its about the better reliability, the option to turn up or down your fps and also better reaponce

[@jacobc2313]

Also u can easily tune a v12 for better trigger response and EASILY 40 rps as long you have a half a brain

[@Morty-111]

je fait 415 fps d'origine moi avec lipo 11.1 mdr