Front Strut Replacement (How to) 2011-2020 Dodge Grand Caravan Chrysler Town and Country

[@jeffmorrissette2643]

Holy crap, you made that look butter smooth! Great video and looking forward to tackling that for my sister this weekend! Keep up the great videos!

[@ValleyMobileAutomotive]

@@jeffmorrissette2643 Overall it's not a bad job. I would recommend spraying a penetrant on the sway bar threads as soon as possible. That's the hardest thing to remove. Maybe have a pair of links on hand in case you need them. You can always return them if you don't need them 👍

[@stevenclark1356]

Great video!!!! One of the best I’ve seen in a long time on KZbin. Thanks you made this job much easier.

[@ValleyMobileAutomotive]

@@stevenclark1356 Awesome! Glad this video was helpful 👍

[@Haskaza22]

Nice video. Might I add its always good practice to leave nuts on the end of bolts before tapping them out so as not to damage the bolt threads.

[@Chadman333]

Tapered end bolts not much of an issue. But flat end bolts absolutely.

[@1971VoiceoftheMummy]

Awesome Work and helpful video! I had a crunchy sounding strut! This vid helped me to change them in record time!

[@ValleyMobileAutomotive]

@@1971VoiceoftheMummy Awesome! Glad this video was helpful 🙂

[@lovesloudcars]

Excellent. Quick, simple and thorough.

[@ValleyMobileAutomotive]

@@lovesloudcars Glad this video was helpful 🙂

[@Chadman333]

Very good video. I found it very helpful to know I can tackle this job as a DIY'r . Broke a spring on the driver side and the bearing at the top is about shot too. I've installed ready struts before but not on this model. It's always good to review the job before starting by watching a video like this in my opinion.

[@ValleyMobileAutomotive]

@@Chadman333 Glad this video was helpful 🙂. If you have any questions feel free to add them in the comments. Happy wrenching 👍

[@josesaldana8058]

Why the 90 degrees after you adjusted to torque???????

[@Clash_Kxng]

I’m stuck at removing the lower 21mm bolt, any suggestions?

[@ValleyMobileAutomotive]

@@Clash_Kxng What's happening with it?

[@scottie2d145]

Thanks for the video, can this job be done with a breaker bar or do I really need the impact wrench? I've done brakes on my car with a breaker bar but are these bolts harder to get of than the ones in a brake job?

[@ValleyMobileAutomotive]

@@scottie2d145 An impact makes it easier but I think a breaker bar will be just fine. I do recommend a torque wrench for tightening 👍

[@scottie2d145]

@@ValleyMobileAutomotive Thanks for the reply. I do have a couple torque wrenches.

[@manuelcanales1471]

Thank you very good information i live in Ensenada baja California México i want to know what brand of shocks you recommend?

[@ValleyMobileAutomotive]

I have a link in the description for Monroe struts. Other good brands are KYB and Gabriel. Either of the three brands will be good 👍

[@scamlikely1926]

Can I get the model of that ryobi impact? Looks like a good tool

[@ValleyMobileAutomotive]

@@scamlikely1926 It's a robust tool that keeps on giving! I have a link in the description 👍

[@chuckhall5347]

The tire shop was going to charge me about $1000 for this. It is nice to own wrenches.

[@ValleyMobileAutomotive]

@@chuckhall5347 Being able to fix your own vehicle is a good feeling 🙂

[@estevangonzalez4185]

Great, how to do video. Keep it up.