Fixing saras valve cover gasket on her hyundai tiburon gt v6. Merch!!! Wolffhatco.com Instagram!! brock._becker
Пікірлер: 43
@sonyalee34344 жыл бұрын
I have 03 Tiburon gt v6 2.7L the Delta.... An this needs to be done to mine, along with a list of repairs an all. But the problem is I'm not able to do the work myself, an have to find someone to help me get then done. Spark plugs, wires, seals, brakes, and belts. Wsh me luck. I love my Tiburon !!!
@Beckermotorco4 жыл бұрын
Good luck man! I appreciate it.
@sonyalee34344 жыл бұрын
@@Beckermotorco well this girl has all the right parts an about to set up shop repairs in day or two now. Maybe I'll record some to share as well.
@pbtubelog4 жыл бұрын
-"Best feeling in the world when you get done" I shared that feeling... I had to replace the spark plugs and cables, which you have to remove same parts to access the spark plugs underneath the surge tank... Unfortunately, after removing everything I found oil inside the spark plugs' chambers, so I guess I will be replacing the valve cover gasket soon. I noticed you had the surge tank not entirely removed but rather, moved to the side. I removed mine, just felt I did not wanted to let it rest on top of other components. Thank you for the video!
@Yourcomputertutordotnet2 ай бұрын
This is a great video , and im definitely on board with having a few afterwards . I have a 20 year old santa fe that ill need to do this at one point. Mines a 2.7 as well.
@haccoon54583 жыл бұрын
Glad I watched until the end. I’ll try and pay attention to the intake manifold gasket so hopefully I don’t have the same issues!
@lawsonconner16112 жыл бұрын
instablaster...
@devinhayes44513 жыл бұрын
THIS HELPED ME FIGURE OUT WHY MY CAR STARTS SMOKING AND BURNING smell same exact problem I gotta do my gaskets too
@ya_boi_zak59274 жыл бұрын
Awesome vid man i need to do the same to mine. Thanks for this vid!
@theshit011004 жыл бұрын
How long did this take you to do both combined?
@leviriordan71832 жыл бұрын
Thx for the chuckle bro that was too funny when you cranked her over 🤣 😂 yup classic workin on your car story.nvr just goes back together huh...take care bro
@dnevill4 жыл бұрын
Good work! I'm debating paying someone to do this on my Hyundai Veracruz 3.8...
@josuemendoza98923 жыл бұрын
Where did you got the gaskets from?
@peterjohnson943810 ай бұрын
I found that the valve covers went on a lot less dramatically if I removed the fuel injector connectors. You're also supposed to use a small dab of silicone on the edges of the cover and at the seams of the casting since those are prone to small leaks otherwise. Your intake issue was probably due to you not loosening the black bracket at the back when putting the upper intake on - it needs to be able to move freely in order to seat properly against the lower intake and the gasket. The black bracket is there to provide structural support for the entire assembly; the vibrations from the engine and the weight of the throttle body can put enough torque on the upper intake to crack it. Getting the black bracket to move freely involves cracking loose three more bolts further down on the engine, and getting those tightened back is a pain and a half.. All that said, this is a good engine. No EGR, no VVT, no nonsense aside from a rather fickle ECU. :) It even holds some boost on stock internals; you can get ~330 hp out of it with stock internals and less than 1 bar of boost.
@GodsSizzle3 жыл бұрын
I just replaced the front gasket and I may have messed with some wiring because my AC immediately stopped giving cold air.
@MrPeterHaller7 ай бұрын
Also I noticed you didn't take off the battery negative terminal and the positive terminal and it takes time for the throttle body to tell the ECM what it's settings are so that can cause all kinds of misfire issues and other problems. But once it reads enough time for for driving it resets. Sometimes you have to do a hard reboot by connecting the negative and the positive cables not on the battery
@boostedkidproductions97196 ай бұрын
Man my car has the same engine just got done doing both gaskets and my intake plenum is making that same noise and car runs bad i tried to buy a new intake gasket and the car barely stays idling
@Tjs_powersports3 жыл бұрын
Mine is leaking so bad is dripping on the ground its also the rear one under the intake
@loveman2284 жыл бұрын
This is literally happening to me right now, and I can't figure it out
@brettconv834 жыл бұрын
No black silicone gasket maker anywhere before installing the valve cover with new rubber gasket? I know some valve covers need silicone in spots along with the gasket
@boblaw44833 жыл бұрын
On my Hyundai Santa Fe V6 3.3l There was 2 dabs of silicone where the cover has joints.
@isaacgibson75982 жыл бұрын
Just get done with this and finished with 4 extra number 7 bolts… and a clip bar gonna have to take it back apart tomorrow
@Beckermotorco2 жыл бұрын
Oh no that’s the worst feeling ever! Hope it not to hard and goes quick!
@robinoochoo52693 жыл бұрын
Thanks for the video, ill be starting my nieces vehicle this weekend... Not looking forward to it lol
@sonyamayo9314 жыл бұрын
P.Dub from Fresno on my lady Sonya tablet. ... That "I'm a dimmer race?"shot at 15:08 Kill that noise brah! real talk....nice fix on the valve cover...
@jaygee4713 жыл бұрын
He actually said, "I'm a different race." I saw that too. I don't think he meant anything out of place, but it definitely caught me off guard. Makes me think about those who do black face and find no problem with it.
@lexb2775 жыл бұрын
Good job
@epicraptorman3 жыл бұрын
There's a bracket behind the upper intake manifold held in by three bolts. Just remove it, you don't need it, and just one more thing to remove/put back on.
@DKSE123 Жыл бұрын
Yes , They Are 12 MM
@peterjohnson943810 ай бұрын
I've actually fiddled mine back on every time I've removed the upper intake. I know the intake is more than strong enough to hold itself in, but the bracket does provide some support for it, so it's just one more safety measure against cracking either the upper or lower intake. The bolts aren't *THAT* hard to get to; a 12mm flex-head ratchet wrench is ideal for this.
@robertfoxful3 жыл бұрын
How many pounds do you tighten the valve cover bolts?
@peterjohnson943810 ай бұрын
About 18 Nm, i.e. not very tight at all. You just need to do several passes around the entire cover because every time you tighten one bolt to spec, the rest loosen up a bit...
@MrMxAudio4 жыл бұрын
i dont normally comment on youtube videos but BRO i did the same exact job SAME exact problem at the end i cant believe it lmfao.
@RustyNutzGarage22 Жыл бұрын
Hey man did you re use your old intake gasket or did you buy a new one?
@jamesworsham231211 ай бұрын
Most of the time they are reusable on intake gasket because it's metal just make sure that there is no dents or pits in the ceiling surface or you can just replace it since you have to remove it. It's called a upper intake plenum gasket Dirt Cheap in price. Do it right first time you won't have any comebacks
@stanpen4127 Жыл бұрын
Cool video, thanks I have a rear gasket oil leak gonna try my luck Ha ha
@MrRemurder4 жыл бұрын
did the smell go away?
@Beckermotorco4 жыл бұрын
Enetang yes the smell is completely gone
@jamesworsham231211 ай бұрын
You got to love it Engineers need to work on cars for ten years before they design crap. Always remember trials and tribulations of auto mechanics are unsurpassed by any other means haha
@gergemall3 жыл бұрын
Story of many of my repairs. Start with the simple stuff first