Vance and Hines big radius 2-1 baffle removal

The easiest way to remove this baffle

[@Plumbermark]

Erm....Don't you have a slide hammer ?

[@JameSSpeedCo]

Thanks again for posting this vid. Extremely helpful and after some muscle and a thick pair of gloves, I was successful! Thanks, bud! 👍

[@DKING941]

james adamsjohnson You’re very welcome friend.

[@dustynauckerman6964]

Any chance you still have the baffle laying around. Im looking for one. Thanks!

Thanks, I used your tip. Worked perfect removing baffles from big shots staggered.The screws were rounded (impossible to get out using allen key), so I grinded them all down and from inside bent the baffle to free them.

[@DKING941]

Jarle Osmund Vågen nice ! I’m glad to hear that.

[@shnarklevonbarkle110]

I've got the same pipes on the same bike and was looking at a couple of bolts back there, but I suspect they're just mounting bolts. Glad I saw this, although I think I might try a mall instead of a rubber mallet.

[@jeffhirsch7970]

Thanks for this video. I have the same pipe, with the baffle out. It can be awesomely loud. I receive plenty of complaints from the bikes riding to my right side. When you re-installed your baffle, was it difficult to align the screw hole to the correct position since it appears to be an interference/press fit ? or does the baffle have guides so that it aligns automatically ? (I didn't remove mine, it was already out when I bought the bike) Thanks again for making this video, more than helpful!

[@hankkuya4354]

Thunder torques by DK custom. Gotta have.

[@AB-yd5gl]

Is there room around the baffle to wrap with fiberglass to make it quieter?

[@willpalmer2704]

Quieter?...never heard of her.

[@HighPowerTommy]

Where can I buy this baffle? A website? I live in Sweden. Thank you in advance, D. King II

[@DKING941]

I got mine off amazon.

[@mrpabs5864]

Thank you this was helpful, mine had two screws though. I took my raider for a spin and I am not sure that I like the sound. I think that I might exchange the pipes for a double exhaust instead. Maybe that will make it sound more deep.

[@DKING941]

I hope it works out for you bro !

[@Harley365]

You realize removing the baffle eliminates the back pressure the engine needs to run correctly? Do a little research you loose power and performance removing baffles

[@shnarklevonbarkle110]

Those pipes come with a tuner which should provide some compensation for the lack of back pressure, no? If not, then a reflash would do the trick.

[@lafincow12]

I don’t think he cares lol