Great info. I noticed this when I first started using the 6l80e. And went with a 3.73. Learned quick they don’t need all that gear.
@nickgrayy2 жыл бұрын
What’s your rpm’s at 70mph with your 3.73 gear. I was thinking in my truck to go from 3.42 stock to 3.73 at 70mph right now. It’s about 1800 maybe less and 2,000 at 80mph
@TexasUrbanSawmillLLC Жыл бұрын
Such great advice. No one talks about this absolute critical design element to a LS swap.
@guillermopena23 жыл бұрын
I'm running 3.25 in my Ford 9in with the L83 6spd swapped camaro. Mitch. I used factory gear for the factory 15 camaro with the 6.2 6spd. They changed to 2.77 for the 6.2 8spd camaro.
@guillermopena23 жыл бұрын
If you look at the highest ratio offered...ie trucks....their ratios are 3.42 and suv 3.23
@donconnelly7856 Жыл бұрын
Much appreciate the information very helpful. I’m running 373 gears in my 72 blazer 35” tires 6.2L L86 / 10l80e Tranmimmion. Your recommendation on gear size would be much appreciated. Correct shifting patterns and Fuel economy being my ultimate goal. Thanks Don
@BigC86757 ай бұрын
Hey Don, any tips? I'm putting a Lt4 & 10L90 in a 71K5. Thx!
@TurboV8boi2 жыл бұрын
What I did was first decided what MPH I wanted to run in the 1/4. I used that number along with max engine RPM and tire size to calculate the rear end ratio I'd need to do it in the gear most appropriate. With a 4l80e it has 4 gears but 3rd is 1:1 so you have to calculate things for that. I decided a 3:31 was right for me (26" tall tire) to support about 160mph or so. It's a tall gear but it's also nice to street drive with.
@Edgar-and-Wrench Жыл бұрын
Huh this is something im glad i know now. Im planning on using a 8l90e with 30in tires and 3.73 rear gears. Now im worried ima have issues with those gears since i didnt know this beforehand. My 88c1500 originally had 3.42 gears
@rangefreewords11 ай бұрын
That first will definately chirp 33"s I am running a IH 304 700R4 D300 3.7.3 combo. I would swap mainly for the mid range gearing it's a lot of slush when mountain drives are needed for spans. Notably, the IH304 would use 160-180hp in that sense adding a lot of lag as it weighs in at 600lbs as is. The added 35 more pounds in this sense over the 700R4 would really cut down on parasitic transmission loss.
@williamdrobertson Жыл бұрын
thanks for this. I'm putting a 10 L 90 in my 2000 1500 sleeperado 5.3. I'll figureit out ,but, this info is good because I'm working with stock gears. not sure 3.55 3.73 i guess I should go look. but doing the swap anyway. thanks for your input. HP tuners all the way! DEPLORABILL
@user-bd6qv4hc8l2 жыл бұрын
Based on my test’s in me L83 turbo Sierra 6l80e i kept 4.10 diff and compared it with same mods Sierra same boost but his diff 3.23 for roll racing i have big advantage from 60mph to 130-140mph which is the totally opposite what most of workshops told me they told me go low diff much better for boost 6l80e, in my opinion it’s all depends in correct calculations and what do you want from your truck roll racing or from dig and what whp in your truck, people saying turbo needs long gears what i see it’s depends when i shift for next gear at what rpm it will be the next shift and also TCM tuning plays big rule on that, now my project to switch my 6l80e to 10l80/90 and change shift point from 6000rpm to 7000rpm and keep 4.10 diff specially with only 570whp
@chadberner64893 жыл бұрын
Awesome video. Thanks Mitchell. On the advice of this video I changed the ring/pinion in my 88 Suburban with the 8L90 to a 3.08 and it made a huge difference. It struck a good balance between what TCM wanted to see and the horsepower and MPG. Great daily driver gear on 26" tall tires. The only issue I have now is that the trans lockup doesn't seem to let go until the last second when coming to a stop and causes a little bit of a lurch in the truck as it stops. Has anyone else had this issue in their 8L90 swaps? Is this expected behavior from this trans? If not, does anyone have a suggestion on what I should start looking at (my transmission knowledge is terrible)? I do have the torque converter control wire from the harness hooked up to the brake light switch in the truck to show the ECM/TCM 12v when I step on the brake.
@NaturallyaspiratedJJM3 жыл бұрын
How about a wheel speed sensor issue?
@RBLUS_TY2 жыл бұрын
KZbin isn't doing right with the video so I can't really watch it but to answer everyone's question, yes the 8L90 will fit any small/big Chevy engine, no matter if it's an old 5.7 or 7.4 or a new 5.3 or 8.1 engine. I'm wanting to swap one in an old 2001 2500HD with a (soon to be) swapped 7.4L and my only problem is finding a TCM or stand alone controller that can actually do that. Anybody got any suggestions?
@chrishansen70042 жыл бұрын
Zero gravity performances 6L80 controller can run the 8L90 supposedly
@lamarwilson68402 жыл бұрын
@@chrishansen7004 I got a l99 2014 Camaro ss… 8spd possible then??
@Gillis77773 жыл бұрын
Thank you for the info. I have been struggling with the programming on my Jeep JK 8L90 swap. I also unfortunately have 5.13 and 37’s. Looks like a gear ratio change is my best option?
@Kastra7073 ай бұрын
Can you disble 1st gear on a 10L80 in HP tuners? Its al little tall for my application
@jessejames7605 ай бұрын
I’m planning on doing a 10l90-l86 for my 14 Sierra with a l83-60l80 Currently the truck has 3.08 gear. Do you recommend getting more gear?
@ryanwharton25313 жыл бұрын
So I want to do an L86 engine swap with a 10 speed transmission in my 5th gen Camaro. What all would I need to do to get that to work such as the motor and trans harness to work with my car?
@therealdjdebonair3 жыл бұрын
ditto, im doing 3.08 gear but after watching the video Im wondering if a mad a mistake idk
@therealdjdebonair3 жыл бұрын
1st gen camaro resto
@guadalupedeleon185 Жыл бұрын
I'm looking into doing something similar. Best thing I've found so far for an LT swap on a 5th gen is to run LS electronics on the LT block/heads. Delete the direct injection and run an LS style port injection manifold. You still get the aluminum block, forged crank and rods. Get forged pistons, cam and you got a solid bottom end. You can do a VVT delete as well or keep it. The LT heads are way better as well. Port them out and rebuild them. As far as transmission goes I'd probably just run the 6l80 since the 5th gens already come with them and the early LTs come with 6l80 transmissions.
@shadowopsairman15833 жыл бұрын
Can the 8L90/10L90 be ran on LS engines (LR4, LM7, LQ4) My truck is 3.23. Guess I don't need a 3.73 or 4.10
@RBLUS_TY2 жыл бұрын
I think it can. I'm tryna swap one to a 7.4L or possibly an 8.1L. The fit is perfect, just look for a stand alone TCM.
@mbrett19682 жыл бұрын
Does the 10 speed have the round 6 bolt tail housing like the 6 speed? Want do do a 10 speed with underdrive setup on my K5. Planning on using your shifter setup. Great setup BTW!
@joncarlson3014 Жыл бұрын
this is a swap? ,, i don't see a physical swap from here
@crackkicks34793 ай бұрын
I want to do a 10 speed swap on my 2006 STS-V how can I make this happen and what do I need to do please write me back as these cars are rare and not a lot of info on the
@marcusrendon13923 жыл бұрын
Aware, and planned on swapping the rear to match.
@loop29623 жыл бұрын
I really really want to 8l90 swap my 09 g8 gt
@subz3ro432 жыл бұрын
Thinking l83 with 10L transmission
@larryhoover54303 жыл бұрын
i was wondering if you could check it for the 373 gears to see what you come up with
@recordmister8562 жыл бұрын
Hello, just a quick question: i drive a 2007 chevy avalanche with 4l80, can i put in a 8l80 trans in this car? The trans will need to be recoded. Is this possible with non original matching engine with hp tuners?
@chesspiece812 жыл бұрын
Is a L86/10 speed swap possible in a GMT800 RCSB Silverado? It had a 5.3 and 4L80E swap previously.
@LSMykie3 жыл бұрын
Can a 10L90 swap be done on a 05 c6 corvette 24 tooth reflector wheel rear mounted trans and diff? Rear diff is factory 3:15 rear tire is 335/25/20
@trentdaddydolla6472 жыл бұрын
Did bluecat update his transmission calculator? If so do you have a link?
@iliof13 жыл бұрын
Hi I have swapped a 6.2 l86 and 8l90e in my c10 . I used psi conversion for my standalone and PCM and TCM. the TCM goes to quick relearn but the system gets aborted and it my autel comes with this message: 1_ the engine stalled 2_ although the gear selector is in drive the transmission exhibt the characteristic of neutral gear. I have used Dexhp fluid. The transmission has less than 50k miles on it. Would you know why its doing that. I really appreciate you.
@dangoodman73742 жыл бұрын
Anyone know when converting an 8l90 4wd to 2wd, are there 2 plugs or places that need drilled out at the end of the trans to let fluid lube the output shaft bushing? I know a 2wd 6l80 has 2 holes that allow fluid to lube the output shaft bushing. Thanks!
@BLACKICE8711 ай бұрын
Will it fit in 2006 to 2013 C6 ?
@datssan3 жыл бұрын
Can you make some l87 content
@serrgmtz3 жыл бұрын
I'll be running 373 gears on a 8l90 with 35s
@elmorris6913 жыл бұрын
How does your car run? I was thinking about 373s and 355s
@swaptimeusa3 жыл бұрын
www.csgnetwork.com/multirpmcalc.html Link for the website that calculates rear end ratio