I use a few drops of Dawn dish soap to get them on but it never dried so took them off and cleaned them then used hair spray they are on tight now
@585fxdb84 жыл бұрын
I've been using compressed air to get those style grips on and it works like a charm.
@TrippHPjunkie4 жыл бұрын
Same compressor broke the other day and had to adapt and over come......😆😆😆 thanks for the comment homie
@ConversusVans3 жыл бұрын
Swapped the boring plastic grips with these pups (Bubble Gum) on a PS2 Thrustmaster bike controller, converted to PC. You put a little bit of hairspray and these fit near perfectly since the tubes of the controller's handles are 1". Feels like I'm playing a real arcade cabinet instead of turning with plastic. Worth the twenty bucks. Now I'm off to Beverly Hills on my virtual Dyna Wide Glide. 😁
@TrippHPjunkie3 жыл бұрын
Haha thats awesome thanks for the comment man had no idea you could do that insanity
@KenzieB125 ай бұрын
I got brown ones on my fxlr and I'm really diggin them. They feel amazing. Match the harley logo and lowrider rims.
@wp51774 жыл бұрын
I got a pair on my FXR I love them
@TrippHPjunkie4 жыл бұрын
Nice man thats what I keep hearing...thank you for the comment...👍👍👍
@sterling15594 жыл бұрын
I ordered these grips for my bmx bike I swear by these grips I love them
@s3hooligan4 жыл бұрын
Cool background music
@benitohernandez50862 жыл бұрын
I boiled some water and dipped them for a few seconds they softened up and slipped right on.
@TrippHPjunkie2 жыл бұрын
Nice man great idea
@benitohernandez50862 жыл бұрын
@@TrippHPjunkie I may be ugly but at least I’m not smart. 🤘🏽💯
@ansonsmith90043 жыл бұрын
air compressor works great if you have one handy. no dry time
@TrippHPjunkie3 жыл бұрын
I didn't at the time but do now thank you
@old666viking4 жыл бұрын
I've done air and brake clean to install grips. I wish these had grooves for safety wire.
@TrippHPjunkie4 жыл бұрын
We will see if they move if they do may try some glue......thank you for the comment 👍👍👍👍👍
@paulson96164 жыл бұрын
Great video. Love that rubber grips. I am so used to traditional HD grips all these years and I have been thinking about getting this type of rubber grips for my new purchased Harley. How do you like'em? The clutch side do not roll meaning moves at all after such periods of times? This would drive me nut...
@TrippHPjunkie4 жыл бұрын
I love them super soft but they do wear faster. I used brake clean to install but after a couple hours that dries and the grips dont move. I hope that helps and thank you for watching my video. If you enjoy this channel consider subscribing thank you
@joshhartness8684 жыл бұрын
Great content keep it up
@TrippHPjunkie4 жыл бұрын
Thanks man that means alot.....speard the word Iam not going anywhere....👍👍👍
@panch1452 Жыл бұрын
Awesome bike! What brand and height are your risers & handle bars?
@paflyfishsallen55943 жыл бұрын
Can these be installed on a 2021 road king? Also what seat do you have on there? Does that seat lower you at all? I’m 5’6”. I like how driver portion is stitched and passenger is plain. Cool video!
@TrippHPjunkie3 жыл бұрын
Yes you just need a TBW throttle tube and its a saddlemen step up slightly lowers
@paflyfishsallen55943 жыл бұрын
@@TrippHPjunkie thanks man!
@slottedpig22534 жыл бұрын
what risers are you running in the video? They look pretty rad dude
@TrippHPjunkie4 жыл бұрын
They are bungking 8"
@evanrichardson74884 жыл бұрын
What kind of clutch lever is that and does the brake lever and reservoir match?
@TrippHPjunkie4 жыл бұрын
www.elitemototech.com/category-s/143.htm use Discount code Tripp10 for a discount....👍👍👍👍
@wahapinify4 жыл бұрын
Do you need the throttle tube for these grips to work?
@TrippHPjunkie4 жыл бұрын
Yes
@wahapinify4 жыл бұрын
I put them on my stock throttle tube and it looks thicker on it but it fit.🤷♂️
@chrismartin500 Жыл бұрын
@@wahapinify does it look way thicker? Im thinking about rolling this same way
@ShieldsRacing8043 жыл бұрын
Hey Tripp, my factory harley grips have a little slot that the left side hand control grabs onto. Similar to the integrated throttle tube on the other side. Will the controls move at all on the clutch side without that?
@TrippHPjunkie3 жыл бұрын
Nah you should be able to tighten them down enough for them to not move on you
@ShieldsRacing8043 жыл бұрын
@@TrippHPjunkie thanks man, just ordered a set and wondered! Had to reference the KZbin’s! Thanks for putting out awesome content
@reybruny Жыл бұрын
Whhhhy don’t they make blue grips????😢
@TrippHPjunkie Жыл бұрын
Haha no clue buddie
@travisprince17012 жыл бұрын
What pegs are you running? Flo?
@TrippHPjunkie2 жыл бұрын
Amazon
@Dkruger444 жыл бұрын
Hey man I have the same exact dyna, looking to do the same bar setup you have. Did you have to go with extended brake and throttle cables? or were you able to make the stock ones work.
@TrippHPjunkie4 жыл бұрын
Everything is stock....thanks for the comment...🤜🤛👍👍👍
@Dkruger444 жыл бұрын
tripp_hpjunkie thanks for the reply man, did you end up buying your tach from the dealer? I know I saw in your other video you got the harness from guerilla cables
@TrippHPjunkie4 жыл бұрын
Yes exactly just ordered a new tach from the dealer....🤜🤛
@dylansbagger4 жыл бұрын
How long did the grips dry for?
@TrippHPjunkie4 жыл бұрын
Thanks for the the comment...took less than a hour to dry...👍👍👍
@tomas19cronin4 жыл бұрын
What levers you running?
@TrippHPjunkie4 жыл бұрын
www.elitemototech.com/product-p/hd-bkcl-combo.htm Use Discount code Tripp10 at Checkout
@paulrevere43264 жыл бұрын
No tube - No sale!
@TrippHPjunkie4 жыл бұрын
thanks for the reply
@Branner19683 жыл бұрын
What about mineral spirits??
@TrippHPjunkie3 жыл бұрын
Dont know brake clean works
@mark7533574 жыл бұрын
Are the grips soft?
@TrippHPjunkie4 жыл бұрын
I would put them between soft and medium but they are super sticky.....thanks for the comment 🔥🔥🤜🤛🔥🔥