VAPOR BLASTING & Restoring Parts on Our YZ500 Two Stroke Build | BRC Racing YZM500 Yamaha Dirt Bike

[@Destroytheskymusic]

Man its so satisfying seeing old parts being restored

[@mxrevival]

Could not agree with you more!

[@jakecroz747]

Man I've never seen vapor blasting shine like that! Usually it's more of a dull brushed finish. Super impressive I know where I'll be sending parts if I ever get my next build up and moving!

[@mxrevival]

Thanks dude! I recently taught my new intern how to do this as well. Man, wish I had the fast track like that haha! Then again, on the other hand, earning it was nice too. I was explaining above in another comment how paper blasting usually looks pretty awesome, even when it isn’t this shiny. Could be a skill, set thing, amount of time, blasted, or media on the end of its life cycle. Thanks for watching!

[@DeCalWorksMX]

Aced!

[@mxrevival]

Go team, go!

[@robertwoods2505]

That vapor blasting came out sweet bro! Take good care of yourself and the family! Cheers to all.

[@mxrevival]

Thank you very much big Rob! Same to you and yours

[@joshhansen6857]

Probably the best finish I’ve seen! I need to make a trip over to your side of the state and watch some of that magic happen!!🤘

[@mxrevival]

Thank you! Lots and lots of practice, and some good tips from those who are better than I am at it over the years

[@garyguyette9739]

I’ve never wanted to win something more in my entire life

[@mxrevival]

I sure hope you bring it home!

[@PremixandPedals]

I don't think Harry Potter's magic wander could do a better job than you can do with that vapor blaster...pure voodoo magic!!!

[@mxrevival]

Hahahahahahahahahaha 🪄💥 Thank you Todd

[@chihuahuaverde425]

Those parts came out awesome from the vapor blaster.

[@MOBLEY49]

Good morning Charles, noticed something interesting . Woundering how you removed the site glasses from the master cylinder’s before the vapor blasting . Thanks again for your help James

[@mxrevival]

Hey JAMES, I simply put them in some soft jaws in my vise, and you can pry/ punch the glass out from the inside. After that, there may still be a pressed in race left behind, at which point you can also pry that out from the outside. Don’t forget the little rubber seal that is left behind. It will be loose and removable with your fingertips after the site glass comes out.

[@joshhamby6032]

Woke up late but iam here watching with my coffee feel like i slept on a rock 🤣 , but here i am . Tricky exhaust valve, cylinder is looking juicy with that head cap ,sheeesh bro thats some good Vapor blasting and keeping it simple and cleaned with tide before hand good tips bro. The parts looked new afterwards.

[@mxrevival]

Too cool, Hamby! I hope that coffee makes you feel better, can’t live without mine. Thanks for watching and the kind words. 😁

[@mxrevival]

📌📌 *_NEW NEW GIVEAWAYS! Get entered to win your YZ500 & every new video's MX parts giveaways here:_* www.mxrevival.com/enter-to-win-mxrevival-yz500-two-stroke-build ---> BEWARE of fake mXrevival pages in the comments using "What'sApp" and a number - *_there's only ONE real mXrevival_*

[@desmondpiihl8776]

Those shine like a diamond!! Man I love vapor blasting!! So damn good

[@mxrevival]

Doing quite a fine job yourself, brother 🙏

[@RideJBI]

One step closer with each video!

[@mxrevival]

Yes, dude! Cannot wait to show everyone what you are going to pull off for this gnarly build of ours!

[@1970genes]

Can’t wait to see another epic build.

[@mxrevival]

Can’t wait to show ya 🙌

[@deriyiyalgomas625]

Hola amigo, saludos, e estado haciendo vapor blasting pero el resultado que obtengo del aluminio es un tono mate, no se que estoy haciendo mal, me serviría de mucha ayuda algunas indicaciones, que presión de aire usas y con que malla de esferas de vidrio trabajas ? saludos amigo, muchas gracias.

[@mxrevival]

This video will solve your Vapor blasting problems 🙌 Vapor Blasting - EVERYTHING You Need to Know 🔥 How To Media Blast - Tips Tricks Tools & Techniques kzbin.info/www/bejne/gGbEg2Z7gLCDja8

[@deriyiyalgomas625]

@@mxrevival muchas gracias amigo

[@Mr10usdad]

Another great video! I am excited about this project! I love my pryme mx pads. I use them on my restores all the time. Do you have a solution to keep the dust and particles from the pads from leaving a layer of stuff on everything in the shop? Thanks!

[@mxrevival]

Thanks dude! So am I. Cannot wait to finish for you guys. Unfortunately, that metal dust it’s just part of the deal! The video that just dropped yesterday morning may have a solution for you, I vacuum while I’m grinding. it is very hard to collect all that stuff, but it is a absolute mess if you do, not, as you know

[@tonyscott1795]

Shredder shreddy Mc Shredderson!

[@mxrevival]

That’s the guy!

[@arthurperez5970]

Looking good bro!

[@mxrevival]

Thank you big Art!

[@michaelalias8756]

What psi and media are you using to get that finish? i have the weekend warrior for personal use it does not look that good after.

[@mxrevival]

Check out “my vapor blasting secrets” on KZbin. Older video I did explaining some of these things. I’ve definitely gotten better, and an updated version can be found somewhere inside of the CR 500 video with the thumbnail of the swingarm that looks destroyed. Lots more vapor blasting in that video and settings.

[@mikeguliz]

Man that looks awesome how come when i get my engines vapor blasted dont look that good 😍

[@mxrevival]

Thanks Mike! Could be several things. Off the top of my head: experience a.k.a. a persons technique, time inside the blaster, media life, equipment (blaster) condition or quality. Most guys won’t go this far for a variety of reasons, either known or unknown to them. It took me a long time to learn how to do this, this nicely. Thanks for watching!

[@TheHemiphil81]

Intro music is sick, kinda sounds like 5 finger.... 🔥

[@mxrevival]

I can hear that! Thanks, Phil!

[@mixtips637]

Godbless

[@mxrevival]

🙏

[@ArdenBallard]

I can’t wait to ride my bike ❤❤❤

[@mxrevival]

That’s the spirit!

[@GarageBuiltcars]

I need a vapor blaster , those parts look sexy.

[@mxrevival]

Way too fun!

[@thatsallfolks3115]

What frame is that?

[@mxrevival]

2003 YZ250.

[@scummybraap518]

Insane :).

[@mxrevival]

😍🙏

[@soupysocksenduro]

The Parts, the Pro & The Build, dude that looked amazing! Funny on the Tide Soap water, that is exactly the same way I wash my motocross boots lol, next time I see ya throw some cash, I expect to see a gold necklace and rings ;)

[@mxrevival]

Dude what's my rap name going to be? Thanks for watching, Jeff!

[@soupysocksenduro]

@@mxrevival Let's roll with Grand Master MX500Revival :P 😜

[@Dirt_Bike_Dave]

Just another Great Video Charles...What's up with your intern ? We haven't seen him in this series ? Anyway keep up the good work, Love this stuff. 😁👍

[@mxrevival]

Great question! Double R Garry broke his hand. But that's not why he hasn't been here. It's just the last thing that happened in a string of events. (Moving, setting back up, tools not running, etc.) He'll be back soon! Thank you Dave 🔥

[@APH.95]

Bro just want to remind you that you have a un finished RM250 af project 😄🤘🏼

[@mxrevival]

😂 about 4 of them, you are right! Frame just came back from powder coating last week and it looks so good! There’s a reel of it up on Instagram if you want to see it before the video

[@APH.95]

@@mxrevival wow sounds good, i I should check my ig, somehow i didn't saw that reel

[@spork929]

Seeing those parts makes me want to disaemble my entire bike and send you all the parts to be blasted... how do we know who won the give away?

[@mxrevival]

We’re here for you! I take in customer parts all the time. When somebody wins one of my giveaways, I send them an email (if it’s one of the giveaways awarded for entering to win the bike) OR I’ll drop a contact link to my website if someone wins a comment to giveaway, since I won’t have had their contact information like I do when they enter to win the bike. 😎

[@jamessaul9836]

More sparkle on that than a birthday party at a strip club.

[@mxrevival]

That one gave my wife and I a good laugh. Ha ha!

[@mikeking7388]

had my cylinder redone and it did not look that good when it came back lol

[@mxrevival]

Yeah, man! Most guys do not put in the extra time to get the extra shine! Vapor blasting, usually looks really good, even when it isn’t done with the extra steps and time. In my case, it took me a few years to learn how to do it this well, so it could even be a skill set thing OR the media in the cabinet your parts were blasted in might’ve been on the end of its life cycle. Either way, I bet it still looks nice! Thanks a ton for watching

[@officialmysteriousrider130]

What mesh glass bead you using 170 mesh ? Looking good 👍

[@mxrevival]

I use the smallest stuff I can get. In case I didn’t mention it in the video link I shared today, for the other vapor blasting video where I explain my PSI’s, etc., I’m using 170-325 media