25 years in sheetmetal, great videos, and instruction. I’ll be sending this to the new guy in the shop. He’s young, and wants to learn. I’m still learning too, thank you.
@sheetmetalwork3 ай бұрын
Thanks
@jeremywalker66617 сағат бұрын
Very well done and i love the tools
@sheetmetalwork16 сағат бұрын
@@jeremywalker666 agree! tools are what makes this stuff happen.
@micheloudentreprisegeneral92032 ай бұрын
This is the best sheet metal video I have seen this year!
@sheetmetalwork2 ай бұрын
Thanks M, I appreciate that you took the time to comment:)
@lukeedwards20662 жыл бұрын
This video is a treasure trove of information. Thank You
@sheetmetalwork2 жыл бұрын
I’m very happy to hear it may be useful for you. DM
@kylesinanansingh4019Ай бұрын
Super helpful video. I have my seams test for my basic tomorrow, and seeing the actual locks and seams on ductwork instead of in a powerpoint has been very nice!
@sheetmetalworkАй бұрын
You just made my day:)
@sheetmetalworkАй бұрын
BTW, good luck on your test
@kylesinanansingh4019Ай бұрын
@@sheetmetalwork thanks!
@beerustheblack28462 жыл бұрын
Dude, wicked video, hope this channel kicks off soon, great content
@sheetmetalwork2 жыл бұрын
Thank you Laurie.
@htpac2 жыл бұрын
Excellent video showing the various metal forming locks. No other video like it. You casually ran an acme lock on a lock former and that is indeed the volume production way, but I'd love to know the bead former roller sequence that the lockformer uses. I bought stainless stovepipe from an elderly Mennonite who had no lock former or even power to his shop: just a bead former. 28 seasons and he is gone but his pipes live on.
@sheetmetalwork2 жыл бұрын
Im glad you enjoyed the video. A Groove Seam is or was was done with powerless tools, it looks a lot like an Acme Lock when finished.
@alphalex882 жыл бұрын
Epic bro. You rock!
@sheetmetalwork Жыл бұрын
Thanks!
@sidocean5633 жыл бұрын
U HAVE CREATED A GEM FOR ME THANK YOU SO MUCH MATE. I M FROM INDIA.
@sheetmetalwork2 жыл бұрын
Thank you Sid.
@jayrajpelly70252 жыл бұрын
Thanks for you you give your mind me work out this bending line
@BozAwesome2 жыл бұрын
Thank you!
@sheetmetalwork2 жыл бұрын
You're welcome!
@ddistrbd19 ай бұрын
I a coppersmith hobbyist and try to do most of the seams by hand, would appreciate a close up of the bends after they are formed. nonetheless, this is a fantastic video and it's already bookmarked for future reference. keep it up.
@kronos9633 жыл бұрын
This awesome info thank you
@sheetmetalwork Жыл бұрын
You’re welcome
@Creator_Nater5 ай бұрын
Noce work, well done!
@sheetmetalwork5 ай бұрын
Thanks,
@user-ez2vs4sm1o2 жыл бұрын
Спасибо большое
@CarlosAlberto-bq9fn2 жыл бұрын
🙏👏👏👏👏👏👏😁👍👍👍muito bom mesmo parabéns me ajudou muito grandes ideias valeu
@ivytechengineer Жыл бұрын
Thanks for the video. You have a nice Power Point, can you share it. I teach a CAD class and wanted to include some sheet metal information my my students ...
@diar0mardiansyah Жыл бұрын
thanks
@jerrytalley80213 күн бұрын
What kind of machine was that you used for the Pittsburgh seam? Most of these seams appear to be used for HVAC, but I’m looking for a way to put that seam on metal for vintage camper restoration, thanks. I know you can make it on a brake. I have 2 siding brakes, but thinking you need the sheet metal shop brake like you have which are big, heavy, and probably expensive? Thanks
@jayrajpelly70252 жыл бұрын
Very very nice 👍 I like
@sheetmetalwork2 жыл бұрын
Thank you Jayraj.
@TheDeadheadable11 ай бұрын
My new work does not have a sheetmetal room. I miss it .
@scrumpmeister3 жыл бұрын
Do you have a a link to the presentation you're showing in the video? I'd like to review it more as I need to create a seam for a 1900's motorcycle tank and I think it's the ACME seam you show, however I'd like to review all of them. Really interesting video, more close ups please.
@sheetmetalwork3 жыл бұрын
Here you will find the link to my channel kzbin.info/door/-4a_7KdPHSDV-XSUOYouTw
@sheetmetalwork3 жыл бұрын
I’m not quite sure about your question but here is the link to my seams Locks and Edges video kzbin.info/www/bejne/e5LUm2Vtps6er5o
@JohnnyJr396 Жыл бұрын
Thanks for this. I bought a 24’’ box break and made a Pittsburg lock from your steps and was perfect. Can you tell me why duct flanges are slanted notched. Is it for clearance for cleats?
@sheetmetalwork Жыл бұрын
Hi Johnny, if I understand correctly, you are asking me about the duct connectors. Most of my video demos have S and Drive cleat connectors, we typically notch them at a slant to facilitate assembly. I hope this answers your question, and if not, do not hesitate to ask again 👍
@JohnnyJr396 Жыл бұрын
@@sheetmetalwork thank you for explaining that . I really appreciate the help and can’t thank you enough for the videos.
@user-gz1pc9om4y7 ай бұрын
Me gusta
@randywhite18072 жыл бұрын
Are you able to make a square down spout using the acme seam and a 10 foot standard brake
@sheetmetalwork2 жыл бұрын
Pretty good question. I’m hoping someone else can jump in and help you out with your question……..I personally never made one but I am also the type of person that believes most things are possible. I truly only have limited experience with acme Locks and the ones that I have, we’re done on a roll forming machine………. I would start by sketching out the side profile of an acme lock, perhaps one may be able to accomplish something very similar as this on a brake? The material allowance for the lock alone will be way more than on the role of former. Everything I just said may not be practical for small gutter work, I would personally go with a groove seem instead. Sorry I couldn’t answer with a definite yes or no 👍
@ChrisKlink564 ай бұрын
Show it next time…GEEZE!!
@Hoyerlift1014 ай бұрын
Show “it”? What is it you wanted to be shown…? Be specific…
@MarcDiMillo Жыл бұрын
What textbook are you referencing here? Also what a fantastic video man. I'm an HVAC apprentice trying to teach myself sheet metal and this channel is a fantastic resource.
@JohnnyJr396 Жыл бұрын
Get Richard budzik practical sheet metal layout. It covers this
@sheetmetalwork Жыл бұрын
Hi Johnny, you’re right! And Budzik books are the best.
@JohnnyJr396 Жыл бұрын
@@sheetmetalwork yes sir they are good but your lessons are far better!
@UddstromNorm3 жыл бұрын
Hello Duane, I enjoy your videos. Where are you located?
@sheetmetalwork3 жыл бұрын
Thanks Norm, I live in Canada, province is New Brunswick, city is Moncton. How about you?
@UddstromNorm3 жыл бұрын
@@sheetmetalwork I live in Pittsburgh, PA. I play a lot of hockey, do you know any of the Snow boys?
@sheetmetalwork3 жыл бұрын
@@UddstromNorm I’m not sure who you mean by snow boys? But Sidney Crosby, Nathan McKinnon and Brad Marchand grew up approx 150 miles away from here.
@UddstromNorm3 жыл бұрын
@@sheetmetalwork Danny Snow had his number retired from Oromocto High School I think. He is 60 now or so, so he graduated around 78 or so. I played with him in Maryland. I know Crosby well, we are huge Penguin fans and season ticket holders
@sheetmetalwork3 жыл бұрын
@@UddstromNorm No i did not know Snow but sure know where Oromocto is. I too played hockey for many years, I’m 55 now, I was born in Gardner Massachusetts, moved to Canada when I was 10. I’ve always been a huge Bruins fan.
@warpie72 жыл бұрын
which is the name of the machine at 20:43 and the brand?
@sheetmetalwork2 жыл бұрын
Warpie7, it,s called a Barfolder.
@warpie72 жыл бұрын
@@sheetmetalwork thanks a lot
@couprojetosespeciais85652 жыл бұрын
Tem PDF ???
@RachelBabe-lc2lx3 ай бұрын
What is allowance?
@sheetmetalwork3 ай бұрын
Pittsburgh pocket allowance is 1”.
@apizalfoshizal2 жыл бұрын
What is your reference book for your types of locks ?
@sheetmetalwork2 жыл бұрын
Hi Andrew, believe me I wish there was one and only book of locks and seams. These are taken from a 3 or 4 different textbooks and other resource manuals that we’ve collected through the years.